Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

CRC Press eBooks

Digital Electronics

Oleg A. Mukhanov

Published May 17, 2022• 0 citations
Publisher

Abstract

This chapter describes developments in digital and mixed-signal applications of superconducting electronics. In the class of mixed-signal circuits, the analog-to-digital converters are the most developed and promising circuits for many applications. Low-temperature superconductors such as Nb are the main superconductor materials for digital and mixed-signal circuits. In order to eliminate or at least significantly reduce the static power dissipation in RSFQ circuits, a number of different logic approaches have been proposed ranging from the simple reduction of the bias resistor resistance to its complete elimination. Contrary to predominantly sequential RSFQ-type circuits described above, RQL logic gates are combinational. To provide a sufficient flux bias signal to the next gate in presence of possible fabrication spread, one has to ensure adequate current flowing through the transformer. The largest superconducting random access memory was demonstrated only at 4 kbit per chip which was not sufficient for applications.

DOI
10.1201/9781003139638-52

Related papers

Superconducting digital circuits with low-T/sub c/ and high-T/sub c/ materials

J.H. Kang, John X. Przybysz, Donald L. Miller +1 more

The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>

IEEE/Cornell Conference on Advanced Concepts in High Speed Semiconductor Devices and Circuits•Dec 9, 2002•0 citations

Superconductor analog-to-digital converters

Oleg A. Mukhanov, Deepnarayan Gupta, Alan M. Kadin +1 more

Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.

Proceedings of the IEEE•Sep 20, 2004•182 citations

Design of superconductor digital circuits for a 30 GHz DSP and for interface to qubits

Samuel Intiso

Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.

•Jan 1, 2006•0 citations

Superconductive Signal-Processing Circuits

T. Van Duzer

This work addresses new signal processing circuits using the special features of superconductivity. A novel flash-type analog-to-digital converter based on a comparator invented in the preceding contract period was demonstrated. The comparator was shown to be useful as a logic gate and an encoder was designed with it. A high-resolution delta-sigma analog-to-digital converter was devised with superconductive components in spite of the lack of an analog integrator in this technology. Positive theoretical results are being followed up experimentally. A simple flux-shuttle single-flux-quantum shift register was devised and several different readout schemes were studied. A six- bit-long version was successfully tested at 1 GHz. A decoder that takes in a five-bit word to select one of 32 output lines was completed. The design involved very tight limitations on current and power. The decoder was combined with a serial-to-parallel converter and operated at 2 GHz. A study of the appropriate architectures for various types of superconductive or Josephson digital technology was developed: an inductance-extraction program.

NASA STI/Recon Technical Report N•Aug 1, 1994•0 citations

Advancement of superconductor digital electronics

Akira Fujimaki

Advancement of superconductor digital electronics, especially Rapid Single Flux Quantum (RSFQ) logic circuit is described. Ultra short pulse of a voltage generated across a Josephson junction and release from charging/discharging process for signal transmission in RSFQ circuits enable us to reduce power consumption and gate delay. The power-delay products (PDPs) of RSFQ integrated circuits (ICs) are 4 or 5 orders of magnitude smaller than those of semiconductor ICs. The fabrication process technology and the related designing technology have been advanced, and RSFQ ICs have been applied to software-defined radio receivers, superconductor detector array systems, and supercomputers. Recently, several kinds of energy-efficient single flux quantum circuit have been proposed to obtain further advantage to semiconductor devices. The PDPs of these circuits become at least 1 order smaller than those of conventional RSFQ circuits.

IEICE Electronics Express•Jan 1, 2012•2 citations

Superconductor Microelectronics: A Digital RF Technology for Software Radios

DARREN K. BROCK

This chapter contains sections titled: Introduction Superconductivity and the Josephson Effect Established Applications of Superconductors Emerging Applications - Software Defined Radio Rapid Single Flux Quantum Digital Logic Circuit Characteristics Example RSFQ Logic Gate - RS Flip Flop RSFQ Data Converters RSFQ Scaling theory Cryogenic Aspects Superconductor SDR for Commercial Applications Superconductors in Wireless Communications Advantages of Superconductor Receivers Trends in Spread Spectrum Communications High Power Amplifier Linearization Digital RF Transceiver Superconductor SDR for Military Applications Co-Site Interference Digitally Dehopping Spread Spectrum Signals Satellite Communications Accommodating New Waveforms Massive Time Multiplexing Conclusions Acknowledgements References

Wiley eBooks•May 15, 2002•2 citations
This chapter describes developments in digital and mixed-signal applications of superconducting electronics. In the class of mixed-signal circuits, the analog-to-digital converters are the most developed and promising circuits for many applications. Low-temperature superconductors such as Nb are the main superconductor materials for digital and mixed-signal circuits. In order to eliminate or at least significantly reduce the static power dissipation in RSFQ circuits, a number of different logic approaches have been proposed ranging from the simple reduction of the bias resistor resistance to its complete elimination. Contrary to predominantly sequential RSFQ-type circuits described above, RQL logic gates are combinational. To provide a sufficient flux bias signal to the next gate in presence of possible fabrication spread, one has to ensure adequate current flowing through the transformer. The largest superconducting random access memory was demonstrated only at 4 kbit per chip which was not sufficient for applications.
The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>
Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.
Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.
This work addresses new signal processing circuits using the special features of superconductivity. A novel flash-type analog-to-digital converter based on a comparator invented in the preceding contract period was demonstrated. The comparator was shown to be useful as a logic gate and an encoder was designed with it. A high-resolution delta-sigma analog-to-digital converter was devised with superconductive components in spite of the lack of an analog integrator in this technology. Positive theoretical results are being followed up experimentally. A simple flux-shuttle single-flux-quantum shift register was devised and several different readout schemes were studied. A six- bit-long version was successfully tested at 1 GHz. A decoder that takes in a five-bit word to select one of 32 output lines was completed. The design involved very tight limitations on current and power. The decoder was combined with a serial-to-parallel converter and operated at 2 GHz. A study of the appropriate architectures for various types of superconductive or Josephson digital technology was developed: an inductance-extraction program.
Advancement of superconductor digital electronics, especially Rapid Single Flux Quantum (RSFQ) logic circuit is described. Ultra short pulse of a voltage generated across a Josephson junction and release from charging/discharging process for signal transmission in RSFQ circuits enable us to reduce power consumption and gate delay. The power-delay products (PDPs) of RSFQ integrated circuits (ICs) are 4 or 5 orders of magnitude smaller than those of semiconductor ICs. The fabrication process technology and the related designing technology have been advanced, and RSFQ ICs have been applied to software-defined radio receivers, superconductor detector array systems, and supercomputers. Recently, several kinds of energy-efficient single flux quantum circuit have been proposed to obtain further advantage to semiconductor devices. The PDPs of these circuits become at least 1 order smaller than those of conventional RSFQ circuits.
This chapter contains sections titled: Introduction Superconductivity and the Josephson Effect Established Applications of Superconductors Emerging Applications - Software Defined Radio Rapid Single Flux Quantum Digital Logic Circuit Characteristics Example RSFQ Logic Gate - RS Flip Flop RSFQ Data Converters RSFQ Scaling theory Cryogenic Aspects Superconductor SDR for Commercial Applications Superconductors in Wireless Communications Advantages of Superconductor Receivers Trends in Spread Spectrum Communications High Power Amplifier Linearization Digital RF Transceiver Superconductor SDR for Military Applications Co-Site Interference Digitally Dehopping Spread Spectrum Signals Satellite Communications Accommodating New Waveforms Massive Time Multiplexing Conclusions Acknowledgements References