Abstract A general scheme has been proposed for the design of photonic-crystal-based all-optical memory by implementing the Kerr effect and slow light phenomenon and a memory cell with independent control on the read, write and hold processes is presented. A photonic crystal slab platform comprised of air holes in a square array with a hole radius of R = 192.5 nm and slab thickness of 275 nm is considered to realize the optical memory operating at the signal and pump wavelengths of λ = 1550 nm and λ = 1604 nm, respectively. The radii of the holes and the thickness of the proposed slab are engineered to provide proper functionality in the write/read waveguides and memory cell. For the slab thickness of 275 nm, the radii of the defect holes at the center of the read and write channels, and memory cell are determined to be 66 nm, 60.5 nm, and 55 nm, respectively. The pump pulse with a peak power of 2.65 W and a minimum time duration of ∼2.64 ps is required for the reading process. Also, the peak power and minimum time duration of 4.7 W and 1.35 ps, respectively are required to accomplish the writing process. The study has been carried out by 3D PWE and 3D FDTD methods.
The constantly growing need for fast and secure optical communication systems resulted in the rapid development of classical and quantum photonic technologies. Continuous research on improving the capacities of communication channels and the efficiency of optical information processing systems were naturally followed by miniaturization. Photonic integration combined with spectral-temporal multiplexing has led to improvements in communications. In this paper, we present accurate control of temporal and spectral profiles of optical pulses generated at the telecom wavelengths using an indium phosphide-based photonic integrated circuit. The device enables simultaneous temporally and spectrally resolved measurements using single photon counting. We discuss its applications in multidimensional time-frequency quantum key distribution, where security relies on time-frequency uncertainty, and other applications.
Quantum memory is a key component of quantum networks. A successful development in enabling the distribution of quantum information requires the storage of single-photon light. Usually quantum information is encoded using a 2D space, spanned, for example, by the orthogonal polarization states of a photon. In this case, each photon carries a quantum bit of information. If the photon could be encoded in a high-dimensional space instead, the information carried by each photon could be increased from a bit to |
log2d| bits, where d is the dimension of the Hilbert space in which the photon is described. The channel capacity of the network and the transmission efficiency would then be greatly enlarged [1]. Moreover, storing high-dimensional states in quantum memory can reduce its sensitivity to memory coherence time [2], leading to significant improvements in storage capacity [3]. It is thus no surprise that many research groups are actively working on different physical systems for storing light encoded using a high-dimensional space. The degrees of freedom for position, linear momentum, time-bin or orbital angular momentum (OAM) of a photon can all be considered as a high-dimensional space for encoding. The photon's OAM has the most potential for encoding [4]. Electromagnetic waves have both spin and OAM. Spin angular momentum produces polarization. Photons with OAM can be regarded as helices with left and right handedness twisted to varying degrees (Fig. 1). Information is encoded using this handedness and the amount of twist. Because of the inherent infinite degrees of freedom for OAM, a photon can in principle carry an arbitrarily large amount of information, and hence the eagerness to store light encoded in OAM space. Although some work on this has been reported for different physical systems, what is lacking is a way of storing and releasing at some later time a true single photon, including its shape and structure [5–7]. Constructing this basic element of quantum memory has been a major challenge. The wavefront of an OAM light is a helical structure (left and center), with an optical vortex at its center in the intensity distribution of light (right). The vortex of light can carry non-zero OAM of any order m. OAM states of a different order are orthogonal. A group at the Key Laboratory of Quantum Information, Chinese Academy of Science, at the University of Science and Technology of China finally resolved this problem [8]. They reported on the first experimental realization of a true single-photon-carrying OAM stored via electromagnetically induced transparency (EIT) in a cold atomic ensemble (Fig. 2). With such a suitable candidate, this work indicates a means of constructing high-dimensional quantum memory. After this, similar results were reported by Laurat's group at Laboratoire Kastler Brossel, at Université Pierre et Marie Curie in France [9], where an extremely weak laser at single-photon level carrying OAM was also stored via EIT in a cold atomic ensemble. Ding et al. [8] first prepared two cold 85Rb atomic clouds in two magnetic-optical traps (MOT) using laser cooling and trapping techniques. They generated non-classical correlated photon pairs using spontaneous four-wave mixing in an atomic cloud. One photon of each pair was used as a trigger; the other mapped and stored in a second atomic cloud via EIT. Each photon to be stored carried one OAM unit. After a programed storage time, the photon was retrieved. What they achieved during storage included (1) proof that the non-classical correlation between the trigger photon and the retrieved photon is retained by demonstrating a strong violation of the Cauchy–Schwarz inequality, (2) a demonstration that the single-photon property of the signal photon is maintained by performing the Hanbury–Brown and Twiss experiment on the trigger photon, (3) proof that the spatial structure of the photon is also very well preserved by showing a high similarity between input and output, and (4) evidence, gathered by Sagnac interferometry, that the coherence of a single photon is also preserved. A heralded single photon is generated through spontaneous four-wave mixing in MOT 1 (a); this single photon carrying OAM is then stored through EIT in MOT 2 (b); (c) shows an image of the photon carrying OAM. Experimental measurements in the transverse position of the image carried by the photon before and after storage are presented in (d) and (e), respectively; (f) shows the simplified experimental setup for storage of a superposition of OAM. Interference patterns taken at different angle settings of the half-wave plate are shown in (g). The left column represents the experimental angle settings of the half-wave and the quarter-wave plates, the middle column gives the experimental results, and the right column gives results from theoretical simulations; (h) and (i) present the interference patterns of the input signal photon and the retrieved signal with plate angle, respectively. This is a significant breakthrough towards the realization of a quantum internet and, potentially, quantum computing. This work addresses the ability to generate, store, retrieve on demand an arbitrary single-photon-level photonic state encoded in OAM space. It signifies an important step in the development of practical quantum-enabled technologies, opens up the possibility for realizing high-dimensional quantum memories based on this degree of freedom of light, and will have a large impact in a broad physical community, especially in the quantum information and quantum optics communities. The Technology Review website of MIT comments on their work very positively with an article entitled ‘First Quantum Memory That Records the Shape of a Single Photon Unveiled in China’. Further, Nature Photonics selected this work as a research highlight. Clearly, memory that can preserve the spatial structure of photons will make the internet far more flexible and capable. Of course, there are still many basic problems remaining that need to be solved to build the future quantum internet, one of which is the construction of quantum memory exploiting entanglement. This derives from the fact that a quantum network needs the distribution of quantum-entangled photons over channels between different nodes [10]. A high-dimensional quantum internet needs to store OAM-entangled states and perform entanglement swapping to efficiently extend the achievable communication distances. While Ding et al. [8] reported the storage of light with OAM at the single-photon level, the photon was, however, still encoded in a 2D space. Therefore, whether it is possible to construct a high-dimensional quantum memory remains an open issue that needs to be investigated further.
We report on the design and the fabrication of 1D photonic crystal nanobeam cavities with optical resonances around 800 nm, compatible with rubidium, cesium, or argon atomic transitions. The cavities are made of indium gallium phosphide material, a III-V semi-conductor compound which has a large index of refraction (n≃3.3) favoring strong optical confinement and small mode volumes. Nanobeam cavities with inline and side coupling have been designed and fabricated, and quality factors up to 2×104 have been measured.
The field of squeezed state is an important quantum resource in the study of quantum optics. In the application of quantum information, the spectrum bandwidth of the squeezed light field is an important index to limit the information transmission capacity. Currently, the optical parametric oscillator (OPO) is one of the most efficient ways to generate high squeezed non-classical optical fields. In this paper, the degenerate singly-resonant and doubly-resonant OPO structures are introduced. Both OPOs are composed of concave mirrors and periodically poled potassium titanyl phosphate crystals (PPKTP). The length of PPKTP crystal is 10 mm. The curvature radius of the curved surface is 12 mm, and it has high reflectivity at 1550 nm and 775 nm. The plane surface is coated with anti-reflection coating. The air gap length is 21 mm. The concave mirror is an output coupling mirror, and its radius of curvature is 25 mm. In the singly-resonant OPO, only the signal light resonates in the cavity, and the pump light passes through the nonlinear crystal twice and then outputs out of the cavity. The reflectivity of OPO output coupling mirror to the wavelength of 1550 nm is 88%. The linewidth of the corresponding fundamental frequency wave is 77.4 MHz. For doubly-resonant OPO, both the signal light and the pump light resonate simultaneously in the cavity. The reflectivity of OPO output coupling mirror to 1550 nm and 775 nm is 85% and 97.5%, respectively. The linewidth of the corresponding fundamental frequency wave and harmonic is 97.1 MHz and 15.6 MHz, respectively. Then the threshold of OPO is calculated. The threshold pump power of OPO increases with signal light transmittance increasing, but the threshold value of doubly-resonant OPO is obviously smaller than that of singly-resonant OPO. After that, the variation of the squeezing bandwidth of the squeezed light field generated by OPO with the transmittance of the signal is analyzed. Finally, we complete the design of quantum squeezer with low threshold (18 mW), broadband (84.2 MHz) and high stability (the standard deviation of locking baseline is 0.32 MHz) experimentally. The results show that compared with the singly-resonant optical parametric oscillator, the doubly-resonant cavity has the characteristics of low threshold and high stability, which is more suitable for the preparation and practical application of broadband squeezed light field.
Abstract Eu³⁺-doped borate and phosphate glasses were synthesized by the conventional melt-quenching technique and investigated as potential materials for quantum photonic and solid-state quantum computing applications. X-ray diffraction analysis confirmed the highly amorphous and isotropic nature of the prepared glasses, providing favorable conditions for coherent photon propagation with minimal scattering losses. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) revealed homogeneous morphology and uniform distribution of Eu³⁺ ions, which are essential for stable light–matter interactions and optical qubit confinement. Physical and optical characterization demonstrated distinct advantages for both glass systems. Borate glasses exhibited higher density, refractive index, field strength, and optical confinement, indicating enhanced photon localization and stronger light–matter interactions suitable for integrated quantum photonic circuits. In contrast, phosphate glasses showed superior rare-earth ion solubility, improved ion dispersion, reduced concentration quenching, and greater spectral stability, making them promising candidates for optical quantum memory and photon-buffering applications. Optical absorption and photoluminescence studies revealed intense Eu³⁺ radiative transitions, particularly the hypersensitive ⁵D₀ → ⁷F₂ transition near 612 nm, confirming strong electric-dipole interactions and efficient quantum optical emission behavior. Judd–Ofelt analysis indicated enhanced asymmetry and covalent bonding around Eu³⁺ ions, resulting in increased radiative transition probabilities, optical gain, and stimulated emission characteristics. These properties are highly beneficial for coherent optical amplification, photon manipulation, and photonic qubit operations. The combined structural, physical, and spectroscopic results demonstrate that Eu³⁺-activated borate and phosphate glasses possess the characteristics required for rare-earth-based quantum emitters, optical quantum memory devices, integrated photonic circuits, quantum sensors, and solid-state quantum computing architectures. The study establishes both glass systems as promising multifunctional platforms for emerging quantum photonic technologies and advanced quantum information processing applications.