Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Toward the realization of a wavelength standard at 780 nm based on a laser diode frequency-locked to rubidium vapor

M. Têtu, Normand Cyr, Bernard Villeneuve, S. Theriault, Marc Breton, P. Tremblay

Published Dec 4, 2002• 0 citations
Publisher

Abstract

The authors present the result of a study on the realization of an optical frequency standard based on a laser diode frequency-locked to Doppler resonance limited and sub-Doppler resonances of the /sup 87/Rb D/sub 2/-line (5S/sub 1/2/ from or to 5P/sub 3/2/, 780.027 nm). The characteristics of the signals obtained from the resonant phase-conjugate reflection, the nonlinear magnetic optical activity, and the saturated absorption are compared to the characteristics of the linear absorption signal. Improvement of laser diode frequency stability is discussed for these techniques. The experimental results indicate that the more complicated the system, the better defined is the reference line.>

DOI
10.1109/cpem.1990.110009

Related papers

Toward the realization of a wavelength standard at 780 nm based on a laser diode frequency locked to rubidium vapor

M. Têtu, Normand Cyr, Bernard Villeneuve +3 more

The authors present the result of a study on the realization of an optical frequency standard based on a laser diode frequency-locked to Doppler resonance limited and sub-Doppler resonances of the /sup 87/Rb D/sub 2/-line (5S/sub 1/2/ from or to 5P/sub 3/2/, 780.027 nm). The characteristics of the signals obtained from the resonant phase-conjugate reflection, the nonlinear magnetic optical activity, and the saturated absorption are compared to the characteristics of the linear absorption signal. Improvement of laser diode frequency stability is discussed for these techniques. The experimental results indicate that the more complicated the system, the better defined is the reference line. >

IEEE Transactions on Instrumentation and Measurement•Apr 1, 1991•24 citations

TOWARD THE REALIZATION OF A WAVELENGTH STANDARD TO RUBIDIUM VAPOR AT 780 nm BASED ON A LASER DIODE FREQUENCY-LOCKED

M. Têtu, Normand Cyr, B. ViUeneuve +3 more

We study Doppler limited and Sub-Doppler spectre scopic techniques to generate optical references from the D2-line (780 nm) of rubidium vapor. The characteristics of the signals obtained from the resonant phase conjugate reflection, the nonlinear magnetic optical activity and the saturated absorption are compared to the linear absorption signal. Improvement of laser diode frequency stability is discussed for these techniques.

•Jan 1, 1990•0 citations

Optical frequency reference at 780 nm from phase conjugate reflection in rubidium vapor

Normand Cyr, M. Têtu, Marc Breton +1 more

Narrow isolated symmetrical resonance lines are essential to the realization of precise frequency standards. We consider here the use of resonant degenerate four-wave mixing phase conjugate reflection from an atomic vapor as an optical reference for this purpose.1 As shown, this technique leads to a well defined narrow linewidth resonance when applied to a rubidium vapor pumped by a laser diode.

•May 21, 1990•1 citation

Optical frequency standard by using a 1560 nm diode laser locked to saturated absorption lines of rubidium vapor

Shin Masuda, Atsushi Seki, Shoji Niki

A robust, compact, highly accurate rubidium optical frequency standard module was developed to overcome the delicate performance of conventional frequency stabilized lasers. A frequency doubled 1560 nm distributed feedback diode laser locked to a rubidium D(2) saturated absorption line without using an optical amplifier was demonstrated, and dithering-free optical output was obtained. In addition, the sensitivity of the developed optical frequency standard to magnetic fields was investigated. We confirmed that the influence of the magnetic fields on the optical frequency standard can be almost negligible when using appropriate magnetic-shield films. As a result, the magnetic-field-insensitive optical frequency standard, which can be embedded in optical systems, exhibiting uncertainty less than at least 100 kHz, was successfully realized for the first time to the best of our knowledge.

Applied Optics•Jul 3, 2007•16 citations

Solitary resonance observed in the saturated absorption spectrum of the 87 Rb D 2 line

Normand Cyr, M. Têtu

In recent years, much work has been done in experimental studies to frequency lock laser diodes to atomic or molecular resonances.1 By such techniques it is possible to improve greatly the laser frequency stability and to define precisely its nominal value. For laser sources operating in the 0.8-μm range, rubidium is the preferred specie and each isotope offers two resonance lines, one at 780 nm (D2 line) and one at 795 nm (D1 line). Both linear and saturated absorption have been used, and laser frequency charcteristics are published.2,3

•Apr 24, 1989•1 citation

Laser-diode frequency control by resonant phase-conjugate reflection from an atomic vapor

Normand Cyr, Marc Breton, M. Têtu +1 more

We report our first results on the frequency control of an AlGaAs laser diode by resonant phase-conjugate reflection from an atomic rubidium vapor. When the electrical feedback technique is used, the Allan variance reaches a flicker floor such that sigma(y)(2)(tau) = 1.6 x 10(-19) tau(0) for tau > 1s. We also demonstrate that laser frequency locking can be achieved by using the phase-conjugate reflection directly as a resonant optical feedback. This approach leads to a self-controlled optical frequency standard at 780 nm.

Optics Letters•Sep 1, 1991•29 citations
The authors present the result of a study on the realization of an optical frequency standard based on a laser diode frequency-locked to Doppler resonance limited and sub-Doppler resonances of the /sup 87/Rb D/sub 2/-line (5S/sub 1/2/ from or to 5P/sub 3/2/, 780.027 nm). The characteristics of the signals obtained from the resonant phase-conjugate reflection, the nonlinear magnetic optical activity, and the saturated absorption are compared to the characteristics of the linear absorption signal. Improvement of laser diode frequency stability is discussed for these techniques. The experimental results indicate that the more complicated the system, the better defined is the reference line.>
The authors present the result of a study on the realization of an optical frequency standard based on a laser diode frequency-locked to Doppler resonance limited and sub-Doppler resonances of the /sup 87/Rb D/sub 2/-line (5S/sub 1/2/ from or to 5P/sub 3/2/, 780.027 nm). The characteristics of the signals obtained from the resonant phase-conjugate reflection, the nonlinear magnetic optical activity, and the saturated absorption are compared to the characteristics of the linear absorption signal. Improvement of laser diode frequency stability is discussed for these techniques. The experimental results indicate that the more complicated the system, the better defined is the reference line. >
A robust, compact, highly accurate rubidium optical frequency standard module was developed to overcome the delicate performance of conventional frequency stabilized lasers. A frequency doubled 1560 nm distributed feedback diode laser locked to a rubidium D(2) saturated absorption line without using an optical amplifier was demonstrated, and dithering-free optical output was obtained. In addition, the sensitivity of the developed optical frequency standard to magnetic fields was investigated. We confirmed that the influence of the magnetic fields on the optical frequency standard can be almost negligible when using appropriate magnetic-shield films. As a result, the magnetic-field-insensitive optical frequency standard, which can be embedded in optical systems, exhibiting uncertainty less than at least 100 kHz, was successfully realized for the first time to the best of our knowledge.
In recent years, much work has been done in experimental studies to frequency lock laser diodes to atomic or molecular resonances.1 By such techniques it is possible to improve greatly the laser frequency stability and to define precisely its nominal value. For laser sources operating in the 0.8-μm range, rubidium is the preferred specie and each isotope offers two resonance lines, one at 780 nm (D2 line) and one at 795 nm (D1 line). Both linear and saturated absorption have been used, and laser frequency charcteristics are published.2,3
We report our first results on the frequency control of an AlGaAs laser diode by resonant phase-conjugate reflection from an atomic rubidium vapor. When the electrical feedback technique is used, the Allan variance reaches a flicker floor such that sigma(y)(2)(tau) = 1.6 x 10(-19) tau(0) for tau > 1s. We also demonstrate that laser frequency locking can be achieved by using the phase-conjugate reflection directly as a resonant optical feedback. This approach leads to a self-controlled optical frequency standard at 780 nm.