Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Single-shot Subnoise Signal Recovery by Coherent Spectral Energy Redistribution

Benjamin Crockett, Luis Romero Cortés, Saikrishna Reddy Konatham, José Azaña

Published Jan 1, 2019• 2 citations
Publisher

Abstract

We demonstrate single-shot recovery of subnoise signals, completely buried under random in-band noise, through combinations of phase manipulations derived from Talbot effect theory, allowing for reconstruction of signals with a time-bandwidth-product of up to 24.
DOI
10.1364/cleo_at.2019.jw2a.71

Related papers

Single-Shot Subnoise Signal Recovery by Coherent Spectral Energy Redistribution

Benjamin Crockett, Luis Romero Cortés, Saikrishna Reddy Konatham +1 more

We demonstrate single-shot recovery of subnoise signals, completely buried under random in-band noise, through combinations of phase manipulations derived from Talbot effect theory, allowing for reconstruction of signals with a time-bandwidth-product of up to 24.

Conference on Lasers and Electro-Optics•May 5, 2019•1 citation

Denoising Amplification of Arbitrary Optical Waveforms by Linear Coherent Energy Redistribution

Benjamin Crockett, Luis Romero Cortés, José Azaña

We present a linear-optics scheme for noiseless passive amplification of arbitrary waveforms, based on the temporal Talbot effect. We achieve amplification factors as high as 15, allowing for extraction of signals buried under noise.

OSA Advanced Photonics Congress•Jan 1, 2018•1 citation

All-Optical Purification of Arbitrary Spectral Waveforms via Cross-Phase Modulation Based Spectral Talbot Amplifier

Zijian Li, Qijie Xie, Z. Y. Zhang +3 more

Using cross-phase modulation based spectral Talbot amplifier, we achieve purification and in-band noise mitigation of arbitrary broadband spectral waveforms. The optical signal-to-noise-ratio is improved by 9 dB, enabling recovery of spectral waveforms hidden under noise.

Conference on Lasers and Electro-Optics•Jan 1, 2023•3 citations

Subnoise detection of a fast random event

Vahid Ataie, Daniel J. Esman, Bill P.-P. Kuo +2 more

Observation of random, nonrepetitive phenomena is of critical importance in astronomy, spectroscopy, biology, and remote sensing. Heralded by weak signals, hidden in noise, they pose basic detection challenges. In contrast to repetitive waveforms, a single-instance signal cannot be separated from noise through averaging. Here, we show that a fast, randomly occurring event can be detected and extracted from a noisy background without conventional averaging. An isolated 80-picosecond pulse was received with confidence level exceeding 99%, even when accompanied by noise. Our detector relies on instantaneous spectral cloning and a single-step, coherent field processor. The ability to extract fast, subnoise events is expected to increase detection sensitivity in multiple disciplines. Additionally, the new spectral-cloning receiver can potentially intercept communication signals that are presently considered secure.

Science•Dec 11, 2015•62 citations

Recovering quantum states buried under noise via coherent energy redistribution

Benjamin Crockett, Nicola Montaut, James van Howe +6 more

Using coherent energy redistribution, we recover entangled quantum states degraded by incoherent noise. An input state fidelity of 0.62 is salvaged to 0.86 on output, by leveraging a setup comprised of off-the-shelf telecommunications components.

Conference on Lasers and Electro-Optics•Jan 1, 2026•0 citations

Denoising amplification of arbitrary coherent signals using the Talbot effect.

Benjamin Crockett

L’optique et la photonique ont été au coeur d’une panoplie d’avancements scientifiques et technologiques \ndepuis quelques décennies. En particulier depuis l’avénement du laser, des approches \nbasées sur l’optique ont été capitales au déploiement d’une multitudes d’applications, notamment \nen spectroscopie, imagerie, métrologie, télécommunication, pour le traitement d’informations, etc.. \nMalgré le progrès formidable des technologies photoniques, certains développements névralgiques \ndans ces divers domaines demandent une sensibilité et une tolérance au bruit accrues afin de pouvoir \nfructueusement extraire l’information requise d’un signal optique donné. Le problème est \nd’autant plus important lorsque le signal d’intérêt est faible, car dans ce cas, de l’énergie externe est \nhabituellement injectée afin que la forme d’onde atteigne suffisamment de puissance pour être détectée. \nCependant, toute forme d’amplification dégrade nécessairement la qualité d’un signal, de sorte \nqu’il est possible que la forme d’onde soit corrompue par le bruit à un point tel que l’information \ncontenue soit totalement perdue. \nEn fait, le problème du bruit est omniprésent, car pratiquement tous les signaux requièrent une \nforme ou une autre d’atténuation de bruit due à l’intrusion inévitable de bruit qui peut affecter les \ndifférents procédés d’un mécanisme de traitement de signal, soit dès lors qu’un signal est généré, \ndurant sa propagation, où au moment de la détection. La méthode la plus répandue pour atténuer \nle bruit est d’utiliser un filtre de bande passante, qui élimine toute l’énergie à l’extérieur d’une \nplage de fréquences données. Néanmoins, cette approche est mal adapté aux signaux qui consiste \nen une gamme de fréquences très restreintes, ainsi que ceux qui consiste en une gamme très large \nde fréquences. En particulier, les signaux à bande étroite sont difficiles à traiter car il est complexe \nde concevoir un filtre optique efficace avec une bande passante très étroite, tout en maintenant une \nperte d’insertion basse. D’autre part, l’atténuation du bruit par filtre à bande passante est inefficace \npour traiter les signaux à large bande, car une quantité importante du bruit est contenue à même \nla bande du signal. Des méthodes alternatives afin de contrer ce bruit interbande sont très rares, \net sont le sujet de recherches actives depuis longtemps. Les quelques solutions existantes se basent \nsur des post-traitements digitales qui ne peuvent pas être appliquées aux signaux optiques. \nCe mémoire présente la nouvelle solution que j’ai développée pour le rétablissement de signaux \noptiques noyés sous le bruit. Le concept est basé sur la théorie de l’effet Talbot, et consiste à \nredistribuer l’énergie d’un signal en une série de pointes dont l’enveloppe suit une forme amplifiée \ndu signal initial. Ce procédé est physiquement implanté exclusivement par des manipulations de \nphases, afin de réaliser un échantillonnage sans perte menant à une amplification sans bruit du signal. \nLa méthode proposée offre le rétablissement du signal en temps réel et à la volée, sans avoir recours \nà un post-traitement digital, agissant directement sur le support physique de l’onde. Elle peut être \ninstaurée soit pour les signaux à bande étroite ou à large bande, visant les problèmes mentionnés \nquant à l’atténuation de bruit pour chaque type de signal. Le concept apporte donc une approche \nopportune et universelle pour la détection de signaux considérablement différents, qui pourrait permettre le rétablissement d’information précédemment inaccessible, accordant potentiellement de \nnouvelles avancées pour des domaines variant de la radioastronomie, aux télécommunications, et à \nla biologie. Optics and photonics have been at the heart of a plethora of scientific and technological advancements \nin the last decades. Particularly since the advent of the laser, optical approaches have been \nkey to numerous scientific and technological applications, namely in spectroscopy, imaging, metrology, \ntelecommunication, and information processing, amongst many others. Despite tremendous \nadvancements in photonic technologies, successful key applications in these diverse fields require \nhigher sensitivity and tolerance against noise to be able to extract the needed information from a \ngiven optical signal. This is particularly problematic when the waveform of interest is weak, since \nin this case, energy is typically injected in the signal in order for it to have sufficient power to be \ndetected, but any form of active amplification will necessarily degrade the quality of a signal, in \nsuch a way that the information can get completely corrupted by noise in the amplification process. \nIn fact, the problem of noise is ubiquitous, as practically all signals require some form of noise \nmitigation due the unavoidable intrusion of noise that can affect a signal processing scheme, which \nmay happen when the signal is generated, during its propagation or at the time of detection. The \nmost common method to mitigate noise is to use a bandpass filter, which eliminates all the energy \noutside of a given bandwidth. However, this approach is ill-suited for signals which consists of a \nvery narrow band of frequency components as well as those that consist of a very broad range of \nfrequency components. In particular, narrowband optical signals are difficult to process because \nit is difficult to design effective optical filters with very narrow pass bands and low loss. On the \nother hand, noise mitigation by bandpass filtering is ineffective for broadband signals since a large \namount of noise is contained within the bandwidth of the signal itself, and as such, is unaffected by \nbandpass filtering. Alternative methods to mitigate this so-called in-band noise are scarce and have \nbeen the subject of much research these past decades. Current solutions typical relying on digital \npost processing methods that are ill-suited for broadband optical signals. \nIn this thesis, I present a novel solution I developed for the recovery of optical signals buried \nunder noise. The concept is based on the theory of the Talbot effect, and consist of redistributing the \nenergy of the signal into discrete bins using phase-only manipulations, simultaneously implementing \nlossless sampling and noiseless amplification of the signal. The proposed method provides signal \nrecovery on the fly and in real-time, directly on the physical wave domain, thus avoiding the need \nfor digitalization and post-processing. It can be implemented for either narrowband or broadband \nsignals, targeting the aforementioned difficulties in noise reduction associated with each kind of \nsignals. It thus brings a timely, universal approach for the detection of vastly different signals, and \ncould enable the recovery of previously unattainable information, allowing for new advances in fields \nranging from radio-astronomy to telecommunications and biology.

•Jan 1, 2019•1 citation
Observation of random, nonrepetitive phenomena is of critical importance in astronomy, spectroscopy, biology, and remote sensing. Heralded by weak signals, hidden in noise, they pose basic detection challenges. In contrast to repetitive waveforms, a single-instance signal cannot be separated from noise through averaging. Here, we show that a fast, randomly occurring event can be detected and extracted from a noisy background without conventional averaging. An isolated 80-picosecond pulse was received with confidence level exceeding 99%, even when accompanied by noise. Our detector relies on instantaneous spectral cloning and a single-step, coherent field processor. The ability to extract fast, subnoise events is expected to increase detection sensitivity in multiple disciplines. Additionally, the new spectral-cloning receiver can potentially intercept communication signals that are presently considered secure.
L’optique et la photonique ont été au coeur d’une panoplie d’avancements scientifiques et technologiques \ndepuis quelques décennies. En particulier depuis l’avénement du laser, des approches \nbasées sur l’optique ont été capitales au déploiement d’une multitudes d’applications, notamment \nen spectroscopie, imagerie, métrologie, télécommunication, pour le traitement d’informations, etc.. \nMalgré le progrès formidable des technologies photoniques, certains développements névralgiques \ndans ces divers domaines demandent une sensibilité et une tolérance au bruit accrues afin de pouvoir \nfructueusement extraire l’information requise d’un signal optique donné. Le problème est \nd’autant plus important lorsque le signal d’intérêt est faible, car dans ce cas, de l’énergie externe est \nhabituellement injectée afin que la forme d’onde atteigne suffisamment de puissance pour être détectée. \nCependant, toute forme d’amplification dégrade nécessairement la qualité d’un signal, de sorte \nqu’il est possible que la forme d’onde soit corrompue par le bruit à un point tel que l’information \ncontenue soit totalement perdue. \nEn fait, le problème du bruit est omniprésent, car pratiquement tous les signaux requièrent une \nforme ou une autre d’atténuation de bruit due à l’intrusion inévitable de bruit qui peut affecter les \ndifférents procédés d’un mécanisme de traitement de signal, soit dès lors qu’un signal est généré, \ndurant sa propagation, où au moment de la détection. La méthode la plus répandue pour atténuer \nle bruit est d’utiliser un filtre de bande passante, qui élimine toute l’énergie à l’extérieur d’une \nplage de fréquences données. Néanmoins, cette approche est mal adapté aux signaux qui consiste \nen une gamme de fréquences très restreintes, ainsi que ceux qui consiste en une gamme très large \nde fréquences. En particulier, les signaux à bande étroite sont difficiles à traiter car il est complexe \nde concevoir un filtre optique efficace avec une bande passante très étroite, tout en maintenant une \nperte d’insertion basse. D’autre part, l’atténuation du bruit par filtre à bande passante est inefficace \npour traiter les signaux à large bande, car une quantité importante du bruit est contenue à même \nla bande du signal. Des méthodes alternatives afin de contrer ce bruit interbande sont très rares, \net sont le sujet de recherches actives depuis longtemps. Les quelques solutions existantes se basent \nsur des post-traitements digitales qui ne peuvent pas être appliquées aux signaux optiques. \nCe mémoire présente la nouvelle solution que j’ai développée pour le rétablissement de signaux \noptiques noyés sous le bruit. Le concept est basé sur la théorie de l’effet Talbot, et consiste à \nredistribuer l’énergie d’un signal en une série de pointes dont l’enveloppe suit une forme amplifiée \ndu signal initial. Ce procédé est physiquement implanté exclusivement par des manipulations de \nphases, afin de réaliser un échantillonnage sans perte menant à une amplification sans bruit du signal. \nLa méthode proposée offre le rétablissement du signal en temps réel et à la volée, sans avoir recours \nà un post-traitement digital, agissant directement sur le support physique de l’onde. Elle peut être \ninstaurée soit pour les signaux à bande étroite ou à large bande, visant les problèmes mentionnés \nquant à l’atténuation de bruit pour chaque type de signal. Le concept apporte donc une approche \nopportune et universelle pour la détection de signaux considérablement différents, qui pourrait permettre le rétablissement d’information précédemment inaccessible, accordant potentiellement de \nnouvelles avancées pour des domaines variant de la radioastronomie, aux télécommunications, et à \nla biologie. Optics and photonics have been at the heart of a plethora of scientific and technological advancements \nin the last decades. Particularly since the advent of the laser, optical approaches have been \nkey to numerous scientific and technological applications, namely in spectroscopy, imaging, metrology, \ntelecommunication, and information processing, amongst many others. Despite tremendous \nadvancements in photonic technologies, successful key applications in these diverse fields require \nhigher sensitivity and tolerance against noise to be able to extract the needed information from a \ngiven optical signal. This is particularly problematic when the waveform of interest is weak, since \nin this case, energy is typically injected in the signal in order for it to have sufficient power to be \ndetected, but any form of active amplification will necessarily degrade the quality of a signal, in \nsuch a way that the information can get completely corrupted by noise in the amplification process. \nIn fact, the problem of noise is ubiquitous, as practically all signals require some form of noise \nmitigation due the unavoidable intrusion of noise that can affect a signal processing scheme, which \nmay happen when the signal is generated, during its propagation or at the time of detection. The \nmost common method to mitigate noise is to use a bandpass filter, which eliminates all the energy \noutside of a given bandwidth. However, this approach is ill-suited for signals which consists of a \nvery narrow band of frequency components as well as those that consist of a very broad range of \nfrequency components. In particular, narrowband optical signals are difficult to process because \nit is difficult to design effective optical filters with very narrow pass bands and low loss. On the \nother hand, noise mitigation by bandpass filtering is ineffective for broadband signals since a large \namount of noise is contained within the bandwidth of the signal itself, and as such, is unaffected by \nbandpass filtering. Alternative methods to mitigate this so-called in-band noise are scarce and have \nbeen the subject of much research these past decades. Current solutions typical relying on digital \npost processing methods that are ill-suited for broadband optical signals. \nIn this thesis, I present a novel solution I developed for the recovery of optical signals buried \nunder noise. The concept is based on the theory of the Talbot effect, and consist of redistributing the \nenergy of the signal into discrete bins using phase-only manipulations, simultaneously implementing \nlossless sampling and noiseless amplification of the signal. The proposed method provides signal \nrecovery on the fly and in real-time, directly on the physical wave domain, thus avoiding the need \nfor digitalization and post-processing. It can be implemented for either narrowband or broadband \nsignals, targeting the aforementioned difficulties in noise reduction associated with each kind of \nsignals. It thus brings a timely, universal approach for the detection of vastly different signals, and \ncould enable the recovery of previously unattainable information, allowing for new advances in fields \nranging from radio-astronomy to telecommunications and biology.