Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

All-Optical Purification of Arbitrary Spectral Waveforms via Cross-Phase Modulation Based Spectral Talbot Amplifier

Zijian Li, Qijie Xie, Z. Y. Zhang, Yuanfei Zhang, Honghui Zhang, Chester Shu

Published Jan 1, 2023• 3 citations
Publisher

Abstract

Using cross-phase modulation based spectral Talbot amplifier, we achieve purification and in-band noise mitigation of arbitrary broadband spectral waveforms. The optical signal-to-noise-ratio is improved by 9 dB, enabling recovery of spectral waveforms hidden under noise.
DOI
10.1364/cleo_si.2023.sth3n.2

Related papers

Denoising Amplification of Arbitrary Optical Waveforms by Linear Coherent Energy Redistribution

Benjamin Crockett, Luis Romero Cortés, José Azaña

We present a linear-optics scheme for noiseless passive amplification of arbitrary waveforms, based on the temporal Talbot effect. We achieve amplification factors as high as 15, allowing for extraction of signals buried under noise.

OSA Advanced Photonics Congress•Jan 1, 2018•1 citation

Temporal Noise Mitigation in a Talbot Amplifier

Reza Maram, Mohamed Seghir Seghilani, Jinwoo Jeon +4 more

We analyze the temporal noise mitigation performance of a Talbot amplifier, employing an electro-optic phase modulator and a dispersive medium. In particular, we obtain the transfer-functions of intensity-fluctuations and timing-jitter for the amplifier, showing a significant noise reduction above a cutoff-frequency and at periodic resonant frequencies.

IEEE Photonics Conference•Sep 1, 2018•0 citations

Denoising amplification of arbitrary coherent signals using the Talbot effect.

Benjamin Crockett

L’optique et la photonique ont été au coeur d’une panoplie d’avancements scientifiques et technologiques \ndepuis quelques décennies. En particulier depuis l’avénement du laser, des approches \nbasées sur l’optique ont été capitales au déploiement d’une multitudes d’applications, notamment \nen spectroscopie, imagerie, métrologie, télécommunication, pour le traitement d’informations, etc.. \nMalgré le progrès formidable des technologies photoniques, certains développements névralgiques \ndans ces divers domaines demandent une sensibilité et une tolérance au bruit accrues afin de pouvoir \nfructueusement extraire l’information requise d’un signal optique donné. Le problème est \nd’autant plus important lorsque le signal d’intérêt est faible, car dans ce cas, de l’énergie externe est \nhabituellement injectée afin que la forme d’onde atteigne suffisamment de puissance pour être détectée. \nCependant, toute forme d’amplification dégrade nécessairement la qualité d’un signal, de sorte \nqu’il est possible que la forme d’onde soit corrompue par le bruit à un point tel que l’information \ncontenue soit totalement perdue. \nEn fait, le problème du bruit est omniprésent, car pratiquement tous les signaux requièrent une \nforme ou une autre d’atténuation de bruit due à l’intrusion inévitable de bruit qui peut affecter les \ndifférents procédés d’un mécanisme de traitement de signal, soit dès lors qu’un signal est généré, \ndurant sa propagation, où au moment de la détection. La méthode la plus répandue pour atténuer \nle bruit est d’utiliser un filtre de bande passante, qui élimine toute l’énergie à l’extérieur d’une \nplage de fréquences données. Néanmoins, cette approche est mal adapté aux signaux qui consiste \nen une gamme de fréquences très restreintes, ainsi que ceux qui consiste en une gamme très large \nde fréquences. En particulier, les signaux à bande étroite sont difficiles à traiter car il est complexe \nde concevoir un filtre optique efficace avec une bande passante très étroite, tout en maintenant une \nperte d’insertion basse. D’autre part, l’atténuation du bruit par filtre à bande passante est inefficace \npour traiter les signaux à large bande, car une quantité importante du bruit est contenue à même \nla bande du signal. Des méthodes alternatives afin de contrer ce bruit interbande sont très rares, \net sont le sujet de recherches actives depuis longtemps. Les quelques solutions existantes se basent \nsur des post-traitements digitales qui ne peuvent pas être appliquées aux signaux optiques. \nCe mémoire présente la nouvelle solution que j’ai développée pour le rétablissement de signaux \noptiques noyés sous le bruit. Le concept est basé sur la théorie de l’effet Talbot, et consiste à \nredistribuer l’énergie d’un signal en une série de pointes dont l’enveloppe suit une forme amplifiée \ndu signal initial. Ce procédé est physiquement implanté exclusivement par des manipulations de \nphases, afin de réaliser un échantillonnage sans perte menant à une amplification sans bruit du signal. \nLa méthode proposée offre le rétablissement du signal en temps réel et à la volée, sans avoir recours \nà un post-traitement digital, agissant directement sur le support physique de l’onde. Elle peut être \ninstaurée soit pour les signaux à bande étroite ou à large bande, visant les problèmes mentionnés \nquant à l’atténuation de bruit pour chaque type de signal. Le concept apporte donc une approche \nopportune et universelle pour la détection de signaux considérablement différents, qui pourrait permettre le rétablissement d’information précédemment inaccessible, accordant potentiellement de \nnouvelles avancées pour des domaines variant de la radioastronomie, aux télécommunications, et à \nla biologie. Optics and photonics have been at the heart of a plethora of scientific and technological advancements \nin the last decades. Particularly since the advent of the laser, optical approaches have been \nkey to numerous scientific and technological applications, namely in spectroscopy, imaging, metrology, \ntelecommunication, and information processing, amongst many others. Despite tremendous \nadvancements in photonic technologies, successful key applications in these diverse fields require \nhigher sensitivity and tolerance against noise to be able to extract the needed information from a \ngiven optical signal. This is particularly problematic when the waveform of interest is weak, since \nin this case, energy is typically injected in the signal in order for it to have sufficient power to be \ndetected, but any form of active amplification will necessarily degrade the quality of a signal, in \nsuch a way that the information can get completely corrupted by noise in the amplification process. \nIn fact, the problem of noise is ubiquitous, as practically all signals require some form of noise \nmitigation due the unavoidable intrusion of noise that can affect a signal processing scheme, which \nmay happen when the signal is generated, during its propagation or at the time of detection. The \nmost common method to mitigate noise is to use a bandpass filter, which eliminates all the energy \noutside of a given bandwidth. However, this approach is ill-suited for signals which consists of a \nvery narrow band of frequency components as well as those that consist of a very broad range of \nfrequency components. In particular, narrowband optical signals are difficult to process because \nit is difficult to design effective optical filters with very narrow pass bands and low loss. On the \nother hand, noise mitigation by bandpass filtering is ineffective for broadband signals since a large \namount of noise is contained within the bandwidth of the signal itself, and as such, is unaffected by \nbandpass filtering. Alternative methods to mitigate this so-called in-band noise are scarce and have \nbeen the subject of much research these past decades. Current solutions typical relying on digital \npost processing methods that are ill-suited for broadband optical signals. \nIn this thesis, I present a novel solution I developed for the recovery of optical signals buried \nunder noise. The concept is based on the theory of the Talbot effect, and consist of redistributing the \nenergy of the signal into discrete bins using phase-only manipulations, simultaneously implementing \nlossless sampling and noiseless amplification of the signal. The proposed method provides signal \nrecovery on the fly and in real-time, directly on the physical wave domain, thus avoiding the need \nfor digitalization and post-processing. It can be implemented for either narrowband or broadband \nsignals, targeting the aforementioned difficulties in noise reduction associated with each kind of \nsignals. It thus brings a timely, universal approach for the detection of vastly different signals, and \ncould enable the recovery of previously unattainable information, allowing for new advances in fields \nranging from radio-astronomy to telecommunications and biology.

•Jan 1, 2019•1 citation

Enhancement of optical receiver sensitivities by amplification of the carrier

Jacques Arnaud

The amplification before detection of the carrier of a modulated optical signal by a narrow-band quantum amplifier enhances the signal-to-noise ratio, particularly when the signal wave-front is distorted. A further improvement is obtained by using a combination of wide-band and narrow-band quantum amplifiers. The practical application of these schemes requires a degenerate regenerative ring-type amplifier capable of amplifying arbitrary transverse field configurations. Experiments show that such an amplifier with a gain of 24 dB and a bandwidth of 1 MHz is feasible. The incident beam axis can be displaced by as much as ten times the beam-waist radius without losing more than 4 dB in gain. Frequency modulation may be converted into amplitude modulation by the phase shift introduced in the carrier.

IEEE Journal of Quantum Electronics•Nov 1, 1968•59 citations

An Optical Phase Quantiser Exhibiting Suppressed Phase Dependent Gain Variation

Kyle R. H. Bottrill, Graham Hesketh, Francesca R. Parmigiani +3 more

We experimentally demonstrate an all-optical phase quantiser based on phase-sensitive amplification which alleviates phase noise to amplitude noise conversion. Phase transfer functions are measured for the very first time using a novel scheme.

Optical Fiber Communication Conference•Jan 1, 2014•12 citations

Adaptive optical signal-to-noise ratio recovery for long-distance optical fiber transmission

Mingwen Zhu, Shangsu Ding, Zhixue Li +3 more

In long-distance fiber optic transmission, the optic fiber link and erbium-doped fiber amplifiers can introduce excessive noise, which reduces the optical signal-to-noise ratio (OSNR). The narrow-band optical filters can be used to eliminate noise and thereby improve OSNR. However, there is a relative frequency drift between the signal and the narrow-band filter, which leads to filtered signal instability. This paper proposes an adaptive OSNR recovery scheme based on a Fabry-Perot (F-P) cavity with mode width of 6 MHz. Utilizing the comb filtering of F-P cavity, the noise around the carrier and sidebands of the signal is filtered out simultaneously. To avoid frequency mismatch, we propose a double-servo scheme to suppress relative frequency drift between the signal and the F-P cavity. We constructed a stable radio frequency transfer system based on passive phase compensation and compared our scheme with other OSNR recovery schemes based on optical filters. Compared to the schemes based on dense wavelength division multiplexing (DWDM) and Waveshaper, our scheme demonstrates an improvement in OSNR of carrier by at least 12 dB and sidebands by at least 23.5 dB. The short-term transfer stability (1 s) is improved by one order of magnitude compared to DWDM and half an order of magnitude compared to Waveshper. This scheme can be applied to the recovery of signals with low OSNR in long-distance fiber optic transmission, improving signal quaility and extending the transmission distance limit.

arXiv:2408.00982•Aug 2, 2024•0 citations
L’optique et la photonique ont été au coeur d’une panoplie d’avancements scientifiques et technologiques \ndepuis quelques décennies. En particulier depuis l’avénement du laser, des approches \nbasées sur l’optique ont été capitales au déploiement d’une multitudes d’applications, notamment \nen spectroscopie, imagerie, métrologie, télécommunication, pour le traitement d’informations, etc.. \nMalgré le progrès formidable des technologies photoniques, certains développements névralgiques \ndans ces divers domaines demandent une sensibilité et une tolérance au bruit accrues afin de pouvoir \nfructueusement extraire l’information requise d’un signal optique donné. Le problème est \nd’autant plus important lorsque le signal d’intérêt est faible, car dans ce cas, de l’énergie externe est \nhabituellement injectée afin que la forme d’onde atteigne suffisamment de puissance pour être détectée. \nCependant, toute forme d’amplification dégrade nécessairement la qualité d’un signal, de sorte \nqu’il est possible que la forme d’onde soit corrompue par le bruit à un point tel que l’information \ncontenue soit totalement perdue. \nEn fait, le problème du bruit est omniprésent, car pratiquement tous les signaux requièrent une \nforme ou une autre d’atténuation de bruit due à l’intrusion inévitable de bruit qui peut affecter les \ndifférents procédés d’un mécanisme de traitement de signal, soit dès lors qu’un signal est généré, \ndurant sa propagation, où au moment de la détection. La méthode la plus répandue pour atténuer \nle bruit est d’utiliser un filtre de bande passante, qui élimine toute l’énergie à l’extérieur d’une \nplage de fréquences données. Néanmoins, cette approche est mal adapté aux signaux qui consiste \nen une gamme de fréquences très restreintes, ainsi que ceux qui consiste en une gamme très large \nde fréquences. En particulier, les signaux à bande étroite sont difficiles à traiter car il est complexe \nde concevoir un filtre optique efficace avec une bande passante très étroite, tout en maintenant une \nperte d’insertion basse. D’autre part, l’atténuation du bruit par filtre à bande passante est inefficace \npour traiter les signaux à large bande, car une quantité importante du bruit est contenue à même \nla bande du signal. Des méthodes alternatives afin de contrer ce bruit interbande sont très rares, \net sont le sujet de recherches actives depuis longtemps. Les quelques solutions existantes se basent \nsur des post-traitements digitales qui ne peuvent pas être appliquées aux signaux optiques. \nCe mémoire présente la nouvelle solution que j’ai développée pour le rétablissement de signaux \noptiques noyés sous le bruit. Le concept est basé sur la théorie de l’effet Talbot, et consiste à \nredistribuer l’énergie d’un signal en une série de pointes dont l’enveloppe suit une forme amplifiée \ndu signal initial. Ce procédé est physiquement implanté exclusivement par des manipulations de \nphases, afin de réaliser un échantillonnage sans perte menant à une amplification sans bruit du signal. \nLa méthode proposée offre le rétablissement du signal en temps réel et à la volée, sans avoir recours \nà un post-traitement digital, agissant directement sur le support physique de l’onde. Elle peut être \ninstaurée soit pour les signaux à bande étroite ou à large bande, visant les problèmes mentionnés \nquant à l’atténuation de bruit pour chaque type de signal. Le concept apporte donc une approche \nopportune et universelle pour la détection de signaux considérablement différents, qui pourrait permettre le rétablissement d’information précédemment inaccessible, accordant potentiellement de \nnouvelles avancées pour des domaines variant de la radioastronomie, aux télécommunications, et à \nla biologie. Optics and photonics have been at the heart of a plethora of scientific and technological advancements \nin the last decades. Particularly since the advent of the laser, optical approaches have been \nkey to numerous scientific and technological applications, namely in spectroscopy, imaging, metrology, \ntelecommunication, and information processing, amongst many others. Despite tremendous \nadvancements in photonic technologies, successful key applications in these diverse fields require \nhigher sensitivity and tolerance against noise to be able to extract the needed information from a \ngiven optical signal. This is particularly problematic when the waveform of interest is weak, since \nin this case, energy is typically injected in the signal in order for it to have sufficient power to be \ndetected, but any form of active amplification will necessarily degrade the quality of a signal, in \nsuch a way that the information can get completely corrupted by noise in the amplification process. \nIn fact, the problem of noise is ubiquitous, as practically all signals require some form of noise \nmitigation due the unavoidable intrusion of noise that can affect a signal processing scheme, which \nmay happen when the signal is generated, during its propagation or at the time of detection. The \nmost common method to mitigate noise is to use a bandpass filter, which eliminates all the energy \noutside of a given bandwidth. However, this approach is ill-suited for signals which consists of a \nvery narrow band of frequency components as well as those that consist of a very broad range of \nfrequency components. In particular, narrowband optical signals are difficult to process because \nit is difficult to design effective optical filters with very narrow pass bands and low loss. On the \nother hand, noise mitigation by bandpass filtering is ineffective for broadband signals since a large \namount of noise is contained within the bandwidth of the signal itself, and as such, is unaffected by \nbandpass filtering. Alternative methods to mitigate this so-called in-band noise are scarce and have \nbeen the subject of much research these past decades. Current solutions typical relying on digital \npost processing methods that are ill-suited for broadband optical signals. \nIn this thesis, I present a novel solution I developed for the recovery of optical signals buried \nunder noise. The concept is based on the theory of the Talbot effect, and consist of redistributing the \nenergy of the signal into discrete bins using phase-only manipulations, simultaneously implementing \nlossless sampling and noiseless amplification of the signal. The proposed method provides signal \nrecovery on the fly and in real-time, directly on the physical wave domain, thus avoiding the need \nfor digitalization and post-processing. It can be implemented for either narrowband or broadband \nsignals, targeting the aforementioned difficulties in noise reduction associated with each kind of \nsignals. It thus brings a timely, universal approach for the detection of vastly different signals, and \ncould enable the recovery of previously unattainable information, allowing for new advances in fields \nranging from radio-astronomy to telecommunications and biology.
The amplification before detection of the carrier of a modulated optical signal by a narrow-band quantum amplifier enhances the signal-to-noise ratio, particularly when the signal wave-front is distorted. A further improvement is obtained by using a combination of wide-band and narrow-band quantum amplifiers. The practical application of these schemes requires a degenerate regenerative ring-type amplifier capable of amplifying arbitrary transverse field configurations. Experiments show that such an amplifier with a gain of 24 dB and a bandwidth of 1 MHz is feasible. The incident beam axis can be displaced by as much as ten times the beam-waist radius without losing more than 4 dB in gain. Frequency modulation may be converted into amplitude modulation by the phase shift introduced in the carrier.
In long-distance fiber optic transmission, the optic fiber link and erbium-doped fiber amplifiers can introduce excessive noise, which reduces the optical signal-to-noise ratio (OSNR). The narrow-band optical filters can be used to eliminate noise and thereby improve OSNR. However, there is a relative frequency drift between the signal and the narrow-band filter, which leads to filtered signal instability. This paper proposes an adaptive OSNR recovery scheme based on a Fabry-Perot (F-P) cavity with mode width of 6 MHz. Utilizing the comb filtering of F-P cavity, the noise around the carrier and sidebands of the signal is filtered out simultaneously. To avoid frequency mismatch, we propose a double-servo scheme to suppress relative frequency drift between the signal and the F-P cavity. We constructed a stable radio frequency transfer system based on passive phase compensation and compared our scheme with other OSNR recovery schemes based on optical filters. Compared to the schemes based on dense wavelength division multiplexing (DWDM) and Waveshaper, our scheme demonstrates an improvement in OSNR of carrier by at least 12 dB and sidebands by at least 23.5 dB. The short-term transfer stability (1 s) is improved by one order of magnitude compared to DWDM and half an order of magnitude compared to Waveshper. This scheme can be applied to the recovery of signals with low OSNR in long-distance fiber optic transmission, improving signal quaility and extending the transmission distance limit.