Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Design of a system for controlling a levitating sphere in superfluid 3He at extremely low temperatures

Manuel Arrayás, José L. Trueba, Carlos Uriarte, D. E. Zmeev

Published Jul 21, 2021• 0 citations
Publisher

Abstract

Abstract We present a new mechanical probe to study the properties of superfluid 3 He at microkelvin temperatures down to 100µK. The setup consists of a set of coils for levitating a superconducting sphere and controlling its motion in a wide variety of regimes. In particular, the realisation of motion of a levitating body at a uniform velocity presents both an experimental challenge and a promising direction into the study of the edge states in topological superfluid 3 He-B. We include the theoretical study of the device stability and simulations to illustrate the capabilities of the control system.

DOI
10.21203/rs.3.rs-725152/v1

Related papers

Design of a system for controlling a levitating sphere in superfluid 3He at extremely low temperatures

Manuel Arrayás, José L. Trueba, Carlos Uriarte +1 more

Abstract We present a new mechanical probe to study the properties of superfluid 3He at microkelvin temperatures down to 100 μK. The setup consists of a set of coils for levitating a superconducting sphere and controlling its motion in a wide variety of regimes. In particular, the realisation of motion of a levitating body at a uniform velocity presents both an experimental challenge and a promising direction into the study of the edge states in topological superfluid 3He-B. We include the theoretical study of the device stability and simulations to illustrate the capabilities of the control system.

arXiv:2107.07858•Scientific Reports•Oct 8, 2021•8 citations

Levitation and controlled movement within superfluids at ultra-low temperatures

Manuel Arrayás

Probes based on levitation principles are opening a broad range of possibilities is ultra low temperature research. Free from mechanical suspension and associated clamping losses, the levitated system enables controlled motion in ultra low temperature environments and provides a platform for investigating superfluid physics, including normal fluid drag, mutual friction, and quasiparticle emission under boundary free conditions. We describe the principles of superconductor levitation, the design and construction of a probe using a superconducting sphere, and the detection strategies that allow precise control of its dynamics. The ability to induce and measure controlled motion within a superfluid opens a pathway toward exploring new dynamical regimes and developing next generation tools for quantum fluid research.

Contemporary Physics•Jun 10, 2026•0 citations

A Superconducting Levitating Oscillator with < 1 $μ$Hz Resonance Linewidth

M. Arrayás, J. L. Trueba, C. Uriarte +5 more

Experiments aimed at quantifying the interface between quantum and classical physics necessarily require a high degree of isolation from the environment: wavefunction collapse and quantum gravity effects at laboratory scales are predicted to be very subtle. Ideally, such tests would be performed in a closed system at extremely low temperatures in order to rule out any external influence and thermal fluctuations. Cryogenic levitated macroscopic bodies are excellent candidates for an accurate laboratory approximation of such systems, as a tether to another body would violate the requirement for the system to be fully closed. Here we report a significant milestone on the way to a practically suitable approximation of such closed system. We have built a milligram-mass superconducting oscillator operating at millikelvin temperatures showing extremely low dissipation rate, with the oscillator ring-down time exceeding 110 hours. This corresponds to the resonance linewidth of less than 0.8 $μ$Hz. The experimental setup is highly tunable and is compatible with adiabatic nuclear demagnetisation, promising even lower temperatures and lower dissipation levels in the future. We demonstrate the capability of our device by measuring drag from $^3$He impurities in superfluid $^4$He at a level of $\sim10^{-8}$ with the drag force in the femtonewton range.

quant-pharXiv:2605.09632•May 12, 2026

High- Q Magnetic Levitation and Control of Superconducting Microspheres at Millikelvin Temperatures

Joachim Hofer, R. Gross, Gerard T. Higgins +11 more

We report the levitation of a superconducting lead-tin sphere with 100 μm diameter (corresponding to a mass of 5.6 μg) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 Hz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6×10^{7}. We also demonstrate 3D magnetic feedback control of the motion of the sphere. The setup is housed in a dilution refrigerator operating at 15 mK. By implementing a cryogenic vibration isolation system, we can attenuate environmental vibrations at 200 Hz by approximately 7 orders of magnitude. The combination of low temperature, large mass, and high quality factor provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.

arXiv:2211.06289•Physical Review Letters•Jul 25, 2023•72 citations

Remote sensing of a levitated superconductor with a flux-tunable microwave cavity

Philip Schmidt, Remi Claessen, Gerard T. Higgins +10 more

We present a cavity-electromechanical system comprising a superconducting quantum interference device which is embedded in a microwave resonator and coupled via a pickup loop to a 6 - μ g magnetically levitated superconducting sphere. The motion of the sphere in the magnetic trap induces a frequency shift in the SQUID-cavity system. We use microwave spectroscopy to characterize the system, and we demonstrate that the electromechanical interaction is tunable. The measured displacement sensitivity of 10 − 7 m / Hz defines a path towards ground-state cooling of levitated particles with Planck-scale masses at millikelvin environment temperatures. Published by the American Physical Society 2024

arXiv:2401.08854•Physical Review Applied•Jul 30, 2024•16 citations

Coupling a Flux-Tunable Resonator to a Magnetically Levitated Superconducting Microparticle

Achintya Paradkar

Magnetically levitated superconducting microparticles provide a promising platform for fundamental quantum experiments and quantum-limited sensing. In the Meissner state, the levitated particle is trapped without mechanical clamping, allowing its center-of-mass motion to exhibit ultralow dissipation. The particle's displacement can be read out dispersively via magnetic flux coupling to superconducting resonators. A challenge for magnetomechanical coupling is to realize a flux-tunable microwave circuit that provides strong flux-to-frequency transduction, low dissipation, and a sufficiently large linear operating range for readout and cooling. This thesis develops and characterizes a chip-based superconducting platform for realizing this transduction.Chip-based levitation of a superconducting microparticle is demonstrated at 40 mK. Passive cryogenic vibration isolation is developed to increase the mechanical quality factors of the levitated particle. For coupling to a microwave circuit, a superconducting flip-chip process based on indium microspheres was developed. The need for Au passivation of Nb or NbN under-bump metallization is demonstrated, and indium-based superconducting interconnects are shown to carry ampere-scale currents. Flux-tunable resonators with 100-200 µm SQUID loops and integrated input coils are designed, fabricated, and characterized. A peak flux responsivity of 20 GHz/Φ₀ is achieved, with one flux quantum modulation requiring only 10-20 µA of input-coil current. Two integrated flux-biasing architectures are developed with flip-chip and on-chip input coils, achieving a total flux transfer efficiency of 1.6%. Junction asymmetry is shown to suppress branch-switching behavior associated with finite SQUID screening.Together, these results establish the superconducting subsystems required for dispersive microwave readout of the center-of-mass motion of a levitated microparticle. Such a magnetomechanical coupling provides a route toward cooling the center-of-mass motion to the ground state, paving the way for the preparation of nonclassical motional states. More broadly, such systems are well-suited for quantum-limited force and acceleration sensing, as well as for probing quantum physics in a previously unexplored mass regime.

•Apr 13, 2026•0 citations
Abstract We present a new mechanical probe to study the properties of superfluid 3 He at microkelvin temperatures down to 100µK. The setup consists of a set of coils for levitating a superconducting sphere and controlling its motion in a wide variety of regimes. In particular, the realisation of motion of a levitating body at a uniform velocity presents both an experimental challenge and a promising direction into the study of the edge states in topological superfluid 3 He-B. We include the theoretical study of the device stability and simulations to illustrate the capabilities of the control system.
Abstract We present a new mechanical probe to study the properties of superfluid 3He at microkelvin temperatures down to 100 μK. The setup consists of a set of coils for levitating a superconducting sphere and controlling its motion in a wide variety of regimes. In particular, the realisation of motion of a levitating body at a uniform velocity presents both an experimental challenge and a promising direction into the study of the edge states in topological superfluid 3He-B. We include the theoretical study of the device stability and simulations to illustrate the capabilities of the control system.
Probes based on levitation principles are opening a broad range of possibilities is ultra low temperature research. Free from mechanical suspension and associated clamping losses, the levitated system enables controlled motion in ultra low temperature environments and provides a platform for investigating superfluid physics, including normal fluid drag, mutual friction, and quasiparticle emission under boundary free conditions. We describe the principles of superconductor levitation, the design and construction of a probe using a superconducting sphere, and the detection strategies that allow precise control of its dynamics. The ability to induce and measure controlled motion within a superfluid opens a pathway toward exploring new dynamical regimes and developing next generation tools for quantum fluid research.
A Superconducting Levitating Oscillator with < 1 μμμHz Resonance Linewidth
Experiments aimed at quantifying the interface between quantum and classical physics necessarily require a high degree of isolation from the environment: wavefunction collapse and quantum gravity effects at laboratory scales are predicted to be very subtle. Ideally, such tests would be performed in a closed system at extremely low temperatures in order to rule out any external influence and thermal fluctuations. Cryogenic levitated macroscopic bodies are excellent candidates for an accurate laboratory approximation of such systems, as a tether to another body would violate the requirement for the system to be fully closed. Here we report a significant milestone on the way to a practically suitable approximation of such closed system. We have built a milligram-mass superconducting oscillator operating at millikelvin temperatures showing extremely low dissipation rate, with the oscillator ring-down time exceeding 110 hours. This corresponds to the resonance linewidth of less than 0.8 μμμHz. The experimental setup is highly tunable and is compatible with adiabatic nuclear demagnetisation, promising even lower temperatures and lower dissipation levels in the future. We demonstrate the capability of our device by measuring drag from 3^33He impurities in superfluid 4^44He at a level of ∼10−8\sim10^{-8}∼10−8 with the drag force in the femtonewton range.
We report the levitation of a superconducting lead-tin sphere with 100 μm diameter (corresponding to a mass of 5.6 μg) in a static magnetic trap formed by two coils in an anti-Helmholtz configuration, with adjustable resonance frequencies up to 240 Hz. The center-of-mass motion of the sphere is monitored magnetically using a dc superconducting quantum interference device as well as optically and exhibits quality factors of up to 2.6×10^{7}. We also demonstrate 3D magnetic feedback control of the motion of the sphere. The setup is housed in a dilution refrigerator operating at 15 mK. By implementing a cryogenic vibration isolation system, we can attenuate environmental vibrations at 200 Hz by approximately 7 orders of magnitude. The combination of low temperature, large mass, and high quality factor provides a promising platform for testing quantum physics in previously unexplored regimes with high mass and long coherence times.
We present a cavity-electromechanical system comprising a superconducting quantum interference device which is embedded in a microwave resonator and coupled via a pickup loop to a 6 - μ g magnetically levitated superconducting sphere. The motion of the sphere in the magnetic trap induces a frequency shift in the SQUID-cavity system. We use microwave spectroscopy to characterize the system, and we demonstrate that the electromechanical interaction is tunable. The measured displacement sensitivity of 10 − 7 m / Hz defines a path towards ground-state cooling of levitated particles with Planck-scale masses at millikelvin environment temperatures. Published by the American Physical Society 2024
Magnetically levitated superconducting microparticles provide a promising platform for fundamental quantum experiments and quantum-limited sensing. In the Meissner state, the levitated particle is trapped without mechanical clamping, allowing its center-of-mass motion to exhibit ultralow dissipation. The particle's displacement can be read out dispersively via magnetic flux coupling to superconducting resonators. A challenge for magnetomechanical coupling is to realize a flux-tunable microwave circuit that provides strong flux-to-frequency transduction, low dissipation, and a sufficiently large linear operating range for readout and cooling. This thesis develops and characterizes a chip-based superconducting platform for realizing this transduction.Chip-based levitation of a superconducting microparticle is demonstrated at 40 mK. Passive cryogenic vibration isolation is developed to increase the mechanical quality factors of the levitated particle. For coupling to a microwave circuit, a superconducting flip-chip process based on indium microspheres was developed. The need for Au passivation of Nb or NbN under-bump metallization is demonstrated, and indium-based superconducting interconnects are shown to carry ampere-scale currents. Flux-tunable resonators with 100-200 µm SQUID loops and integrated input coils are designed, fabricated, and characterized. A peak flux responsivity of 20 GHz/Φ₀ is achieved, with one flux quantum modulation requiring only 10-20 µA of input-coil current. Two integrated flux-biasing architectures are developed with flip-chip and on-chip input coils, achieving a total flux transfer efficiency of 1.6%. Junction asymmetry is shown to suppress branch-switching behavior associated with finite SQUID screening.Together, these results establish the superconducting subsystems required for dispersive microwave readout of the center-of-mass motion of a levitated microparticle. Such a magnetomechanical coupling provides a route toward cooling the center-of-mass motion to the ground state, paving the way for the preparation of nonclassical motional states. More broadly, such systems are well-suited for quantum-limited force and acceleration sensing, as well as for probing quantum physics in a previously unexplored mass regime.