Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Broadband optical parametric amplification using PPLN waveguide pumped by detuned second harmonic

Masaki Asobe, Daiki Yagi, Yuki Kawabata, Takeshi Umeki, Koji Enbutsu, Takushi Kazama, Ryoichi Kasahara

Published Mar 2, 2022• 11 citations
Publisher

Abstract

Optical parametric amplification in the range of 1.3–1.8 µm was demonstrated by using a periodically poled LiNbO3 (PPLN) waveguide as a nonlinear medium by varying the detuning of the pump wavelength. A wide range of detuning was enabled by using a multiple-quasi-phase-matched (M-QPM) LiNbO3 waveguide for pump generation through second harmonic generation (SHG) and temperature control of the PPLN waveguide. Broadband optical amplification and wavelength conversion through difference frequency generation (DFG) are considered useful for widening the bandwidth of optical communication.

DOI
10.1364/oe.453578

Related papers

Parametric wavelength conversion with bidirectional utilization of a multiple QPM device

Masaki Asobe, Saroeun Punhavan, Kato Masato +4 more

A configuration for wavelength conversion and optical amplification by parametric interaction using a nonlinear optical device is proposed. It enables pump generation through second harmonic generation (SHG), difference frequency generation (DFG), and optical parametric amplification (OPA) using a multiple-quasi-phase-matched (M-QPM) LiNbO3 waveguide in a bidirectional manner. Wavelength conversion for the 1.4–1.6 µm band is experimentally demonstrated. In addition, it is demonstrated that the parametric gain band can be changed using various detunings between the pump and QPM wavelengths used for the DFG/OPA process. The proposed method would be useful for enabling high-capacity optical transmission outside the 1550-nm band.

Optics Express•Jun 22, 2021•5 citations

Comparison of wavelength conversions based on cascaded second-harmonic generation/difference-frequency generation under continuous-wave and pulsed pumping

Yong Wang, Jorge Fonseca-Campos, Chang-Qing Xu +3 more

The implementation of wavelength conversion around 1.55 μm in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is mostly based on the cascaded second-harmonic generation/difference-frequency generation (SHG/DFG) process. As usual, a continuous wave (CW) and a pulsed wave are injected into a PPLN waveguide. Of them, the pulsed wave is regarded as the information carrier, and the CW is taken as the control. To transfer the information of optical codes from one wavelength to another, the codes can be applied to either the signal (CW-pumped scheme) or the pump (pulse-pumped scheme). In this work, the temporal and spectral properties of wavelength conversions during pulse propagation as well as the conversion efficiency in the two pumping schemes were compared experimentally and theoretically under different conditions of input pulse width, pump power and pump central wavelength. In the experiments, we adopted an MgO-doped PPLN waveguide, and a 40-GHz tunable picosecond-pulse source. The conversion characteristics were systematically investigated when the CW and the pulsed wave were alternatively taken as the pump at the quasi-phase-matching wavelength of the device. In the theory, we solved the coupled-mode equations and explained the physical insights for the numerical results and experimental observations. The conversion properties of the two pumping schemes were quantitatively compared. The simulated results agree well with the experimental data, and the obtained results provide some guidelines for the design and application of QPM waveguides in wavelength conversion.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 11, 2006•0 citations

Broadband quantum photon source in a step-chirped periodically poled lithium niobate waveguide

Xiao‐Xu Fang, Guoliang Shentu, he lu

Broadband nonlinear optical devices play a critical role in both classical and quantum optics. Here, we design and fabricate a 6.82-mm-long step-chirped periodically poled lithium niobate (CPPLN) waveguide on lithium niobate on insulator, which enables quasi-phase matching over a broad bandwidth for second-harmonic generation (SHG) and spontaneous parametric down-conversion (SPDC). The SHG achieves an average efficiency of 91%/W/cm 2 over the first-harmonic wavelength range of 1510 nm–1620 nm, paving the way for realizing SPDC across a wide range of pump wavelengths. For SPDC, by tuning the pump wavelength to 775 nm, 780 nm, and 785 nm, we achieve broadband photon-pair generation with a maximum full bandwidth and brightness up to 99 THz (846 nm) and 21 MHz/mW/nm, respectively. Our findings provide an efficient and experiment-friendly approach for generating broadband photon pairs, which holds significant promise for advancing applications in quantum metrology.

Optics Express•Jan 13, 2026•2 citations

Broadband Quantum Photon Source in Step-Chirped Periodically Poled Lithium Niobate Waveguide

Xiao‐Xu Fang, Guo-Liang Shentu, Lu He

Broadband nonlinear optical devices play a critical role in both classical and quantum optics. Here, we design and fabricate a 6.82-mm-long step-chirped periodically poled lithium niobate~(CPPLN) waveguide on lithium niobate on insulator, which enables quasi-phase matching over a broad bandwidth for second-harmonic generation~(SHG) and spontaneous parametric down-conversion~(SPDC). The SHG achieves an average efficiency of 54.4\%/W/cm$^2$ over the first-harmonic wavelength range of 1510~nm-1620~nm, paving the way for realizing SPDC across a wide range of pump wavelengths. For SPDC, by tuning the pump wavelength to 775~nm, 780~nm, and 785~nm, we achieve broadband photon-pair generation with a maximum full bandwidth and brightness up to 99~THz~(846~nm) and 20~GHz/mW/nm, respectively. Our findings provide an efficient and experiment-friendly approach for generating broadband photon pairs, which holds significant promise for advancing applications in quantum metrology.

arXiv:2510.03619•Oct 4, 2025•0 citations

All-Optical Wavelength Conversion Based on the Cascaded Sum and Difference Frequency Generation in a Periodically Poled Lithium-Niobate Waveguide

Jian Wang

The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.

Optics & Optoelectronic Technology•Jan 1, 2007•0 citations

Comparison of cascaded χ2 wavelength conversions in quasi-phase-matched (QPM) waveguides

Bo Chen, Chang‐Qing Xu

Cascaded second-order nonlinear interaction (&chi(2));based wavelength conversion technique has attracted much attention due to its unique characteristics such as low noise and broadband, which are critical in fiber communication networks. In this report, wavelength conversions based on the newly proposed SFG-DFG (sum frequency generation - difference frequency generation) and conventional SHG-DFG (second harmonic generation - difference frequency generation) are studied and compared both experimentally and theoretically in a LiNbO3 quasi-phase matched (QPM) waveguide. It is shown that the same conversion efficiency can be achieved by employing two pump sources with only half power each (P1, P2) in the SFG-DFG scheme as compared with the SHG-DFG scheme with a single higher power pump beam (P=P1+P2). It is shown that the cascaded SFG-DFG based wavelength conversion has a larger 3-dB pump tolerance bandwidth. The theoretical results are consistent well with the experimental ones. It is found that the pump wavelength difference can be separated by a span as large as 75 nm, while 3-dB signal conversion efficiency is retained in a 45 mm-long device. It is also exhibited that tolerance of temperature for the cascaded SFG-DFG remains the same as that of the cascaded SHG-DFG based devices. The results show that the SFG-DFG wavelength conversion scheme is very attractive for practical applications.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 16, 2004•0 citations
Optical parametric amplification in the range of 1.3–1.8 µm was demonstrated by using a periodically poled LiNbO3 (PPLN) waveguide as a nonlinear medium by varying the detuning of the pump wavelength. A wide range of detuning was enabled by using a multiple-quasi-phase-matched (M-QPM) LiNbO3 waveguide for pump generation through second harmonic generation (SHG) and temperature control of the PPLN waveguide. Broadband optical amplification and wavelength conversion through difference frequency generation (DFG) are considered useful for widening the bandwidth of optical communication.
A configuration for wavelength conversion and optical amplification by parametric interaction using a nonlinear optical device is proposed. It enables pump generation through second harmonic generation (SHG), difference frequency generation (DFG), and optical parametric amplification (OPA) using a multiple-quasi-phase-matched (M-QPM) LiNbO3 waveguide in a bidirectional manner. Wavelength conversion for the 1.4–1.6 µm band is experimentally demonstrated. In addition, it is demonstrated that the parametric gain band can be changed using various detunings between the pump and QPM wavelengths used for the DFG/OPA process. The proposed method would be useful for enabling high-capacity optical transmission outside the 1550-nm band.
The implementation of wavelength conversion around 1.55 μm in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is mostly based on the cascaded second-harmonic generation/difference-frequency generation (SHG/DFG) process. As usual, a continuous wave (CW) and a pulsed wave are injected into a PPLN waveguide. Of them, the pulsed wave is regarded as the information carrier, and the CW is taken as the control. To transfer the information of optical codes from one wavelength to another, the codes can be applied to either the signal (CW-pumped scheme) or the pump (pulse-pumped scheme). In this work, the temporal and spectral properties of wavelength conversions during pulse propagation as well as the conversion efficiency in the two pumping schemes were compared experimentally and theoretically under different conditions of input pulse width, pump power and pump central wavelength. In the experiments, we adopted an MgO-doped PPLN waveguide, and a 40-GHz tunable picosecond-pulse source. The conversion characteristics were systematically investigated when the CW and the pulsed wave were alternatively taken as the pump at the quasi-phase-matching wavelength of the device. In the theory, we solved the coupled-mode equations and explained the physical insights for the numerical results and experimental observations. The conversion properties of the two pumping schemes were quantitatively compared. The simulated results agree well with the experimental data, and the obtained results provide some guidelines for the design and application of QPM waveguides in wavelength conversion.
Broadband nonlinear optical devices play a critical role in both classical and quantum optics. Here, we design and fabricate a 6.82-mm-long step-chirped periodically poled lithium niobate (CPPLN) waveguide on lithium niobate on insulator, which enables quasi-phase matching over a broad bandwidth for second-harmonic generation (SHG) and spontaneous parametric down-conversion (SPDC). The SHG achieves an average efficiency of 91%/W/cm 2 over the first-harmonic wavelength range of 1510 nm–1620 nm, paving the way for realizing SPDC across a wide range of pump wavelengths. For SPDC, by tuning the pump wavelength to 775 nm, 780 nm, and 785 nm, we achieve broadband photon-pair generation with a maximum full bandwidth and brightness up to 99 THz (846 nm) and 21 MHz/mW/nm, respectively. Our findings provide an efficient and experiment-friendly approach for generating broadband photon pairs, which holds significant promise for advancing applications in quantum metrology.
Broadband nonlinear optical devices play a critical role in both classical and quantum optics. Here, we design and fabricate a 6.82-mm-long step-chirped periodically poled lithium niobate~(CPPLN) waveguide on lithium niobate on insulator, which enables quasi-phase matching over a broad bandwidth for second-harmonic generation~(SHG) and spontaneous parametric down-conversion~(SPDC). The SHG achieves an average efficiency of 54.4\%/W/cm2^22 over the first-harmonic wavelength range of 1510~nm-1620~nm, paving the way for realizing SPDC across a wide range of pump wavelengths. For SPDC, by tuning the pump wavelength to 775~nm, 780~nm, and 785~nm, we achieve broadband photon-pair generation with a maximum full bandwidth and brightness up to 99~THz~(846~nm) and 20~GHz/mW/nm, respectively. Our findings provide an efficient and experiment-friendly approach for generating broadband photon pairs, which holds significant promise for advancing applications in quantum metrology.
The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.
Cascaded second-order nonlinear interaction (&chi(2));based wavelength conversion technique has attracted much attention due to its unique characteristics such as low noise and broadband, which are critical in fiber communication networks. In this report, wavelength conversions based on the newly proposed SFG-DFG (sum frequency generation - difference frequency generation) and conventional SHG-DFG (second harmonic generation - difference frequency generation) are studied and compared both experimentally and theoretically in a LiNbO3 quasi-phase matched (QPM) waveguide. It is shown that the same conversion efficiency can be achieved by employing two pump sources with only half power each (P1, P2) in the SFG-DFG scheme as compared with the SHG-DFG scheme with a single higher power pump beam (P=P1+P2). It is shown that the cascaded SFG-DFG based wavelength conversion has a larger 3-dB pump tolerance bandwidth. The theoretical results are consistent well with the experimental ones. It is found that the pump wavelength difference can be separated by a span as large as 75 nm, while 3-dB signal conversion efficiency is retained in a 45 mm-long device. It is also exhibited that tolerance of temperature for the cascaded SFG-DFG remains the same as that of the cascaded SHG-DFG based devices. The results show that the SFG-DFG wavelength conversion scheme is very attractive for practical applications.