Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP)

Terahertz Communication Demonstration by using a High-Tc Superconducting Josephson Receiver Integrated with a Miniature Cryocooler

Xiang Gao, Jia Du, Ting Zhang, Hao Zhang, Xiaojing Huang, Yingjie Jay Guo

Published Nov 15, 2021• 3 citations
Publisher

Abstract

This paper presents the terahertz communication demonstration by using a quasi-optically coupled high-$T_{\mathrm{c}}$superconducting (HTS) Josephson receiver. The receiver consists of a broadband HTS Josephson-junction mixer integrated with a cryogenic low noise amplifier inside a miniature cryocooler. The noise and conversion properties of the broadband HTS mixer versus the bias current and local oscillator (LO) power, are thoroughly investigated for different operating temperatures and frequencies. Based on such HTS receiver frontend, a 320-GHz wireless communication link was established at the UTS laboratory and demonstrated by using the QPSK and 16QAM modulations, respectively.

DOI
10.1109/imws-amp53428.2021.9643972

Related papers

340 GHz Double-Sideband Mixer Based on Antenna-Coupled High-Temperature Superconducting Josephson Junction

Xiang Gao, Ting Zhang, Jia Du +1 more

Wireless communication and sensing are moving from microwave, millimeter-wave into the terahertz (THz) frequency regime to meet the fast growing demand of ultrahigh data-rate communications and super resolution imaging. Faced with severe atmospheric absorption attenuation and the lack of power efficient transmitting source at the higher band, ultrasensitive and cost-effective receiver frontend technology is required for advanced THz wireless systems. To date, the most sensitive heterodyne mixers, the key components of frontend receiver systems, are based on low-temperature superconducting materials that operate at liquid helium (4.2 K) temperature range, requiring expensive and bulky cryogenic cooling systems thus hindering them from commercial applications such as wireless communications and sensing. In this article, we present a 340 GHz double-sideband fundamental mixer based on thin-film antenna-coupled high-temperature superconducting (HTS) Josephson junction that operates at a much higher temperature range attainable with smaller and cheaper cryocoolers. Based on our innovative work in terms of advanced device circuit and on-chip antenna designs, accurate parametric simulation analyses, and Josephson junction parameter optimizations, the reported mixer exhibits a measured noise temperature of 470 and 780 K at operating temperatures of 20 and 40 K respectively at 340 GHz, a performance significantly higher than any HTS THz mixers reported to date.

IEEE Transactions on Terahertz Science and Technology•Nov 11, 2019•33 citations

Ultrasensitive Terahertz High-Tc Superconducting Receivers

Xiang Gao, Ting Zhang, Jia Du +1 more

This paper reviews our major technical achievement in high-Tcsuperconducting (HTS) terahertz (THz) receivers or heterodyne mixers in recent years. By virtue of innovative on-chip antenna/circuit designs, accurate device modelling and simulation, and advanced YBa2Cu3O7-x (YBCO) step-edge junction technology, we have successfully developed a series of HTS Josephson THz mixers with superior performance in terms of operating temperature, intermediate-frequency (IF) bandwidth, conversion gain and noise temperature. These mixers serve as promising receiver frontends for THz wireless communication and sensing systems.

IEEE MTT-S International Wireless Symposium (IWS)•May 1, 2019•0 citations

Terahertz harmonic mixer based on HTS Josephson junction

Mei Yu, Weiwei Xu, Jin Shi +3 more

High temperature superconducting (HTS) Josephson junction (JJ) mixers are attractive candidates in receivers for terahertz (THz) communication due to their high sensitivity, wide bandwidth, low local oscillator (LO) power requirement and high harmonic numbers. The required LO frequencies and the cost can be greatly reduced when harmonic signals can be detected at high orders (more than 100). In this paper, up to 114thharmonic mixings is presented in a HTS bicrystal YBa2Cu3O7-δ(YBCO) JJ harmonic mixer coupled with a bowtie loaded meander antenna at 0.21 THz. HTS JJs will be promising high-order harmonic mixers for THz practical applications on reception or detection at THz bands.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Aug 29, 2021•0 citations

Design and modeling of a single-balanced high-Tc superconducting Josephson-junction terahertz mixer

Xiang Gao, Huanxin Li, Jia Du +5 more

High-Tc superconducting (HTS) receivers are promising candidates for terahertz (THz) communication applications due to their superior sensitivity and the cooling attainability with a miniature cryogenic system. Nevertheless, currently reported HTS mixers are mostly single-junction devices, and a more complicated architecture like the balanced configuration has not been investigated. This paper presents the design of a 600-GHz single-balanced HTS mixer, where detailed electromagnetic simulations are carried out to optimize the coupling efficiency and port isolation, as well as desired amplitude and phase relationship. To predict the noise and conversion performance, we present an innovative multiport network interleaving-based modeling method that enables powerful simulation verifications for single-balanced HTS Josephson mixers. Simulation results show that the presented device exhibits very good HTS mixer performance at the 600-GHz band, which validates the effectiveness of the design and the potential of the mixer for THz communication applications.

Journal of Applied Physics•Jan 20, 2022•8 citations

A wideband terahertz high- T c superconducting Josephson-junction mixer: electromagnetic design, analysis and characterization

Xiang Gao, Ting Zhang, Jia Du +3 more

Abstract This paper presents a wideband terahertz (THz) mixer based on a thin-film antenna-coupled high-temperature superconducting (HTS) YBa 2 Cu 3 O 7−x (YBCO) step-edge Josephson junction. The HTS mixer enables the flexible harmonic mixing operation at multiple THz bands with the same microwave local oscillator (LO) source, and features very wide intermediate-frequency or instantaneous bandwidth. In order to optimize the frequency down-conversion performance of the mixer, systematic electromagnetic design and analysis have been carried out to improve the power coupling of THz radiation as well as wideband transmission of microwave signals. Experimental characterization of a fabricated device prototype has demonstrated that the mixer exhibits good performance at both the 200 GHz and 600 GHz bands. Detailed measurement results including the DC characteristics, LO pumping requirement, frequency response, mixing linearity and conversion gain are presented in this paper.

Superconductor Science and Technology•Jun 30, 2017•42 citations

0.34- THz High-Temperature Superconducting Josephson-Junction Mixer with Superior Noise and Conversion Performance

Xiang Gao, Jia Du, T. Zhang +1 more

We present, in this work, a new thin-film antenna-coupled high-temperature superconducting (HTS) Josephson-junction terahertz (THz) mixer that demonstrates superior performance at frequencies around 0.34 THz. A novel dual-meander-slot thin-film antenna is designed to significantly improve the antenna-junction impedance matching and thus more efficient coupling of the THz signal power. Theoretical and experimental investigations are carried out to evaluate the mixer performance. This mixer can be applied to the sensitive THz wireless receivers.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2018•3 citations
This paper presents the terahertz communication demonstration by using a quasi-optically coupled high-TcT_{\mathrm{c}}Tc​superconducting (HTS) Josephson receiver. The receiver consists of a broadband HTS Josephson-junction mixer integrated with a cryogenic low noise amplifier inside a miniature cryocooler. The noise and conversion properties of the broadband HTS mixer versus the bias current and local oscillator (LO) power, are thoroughly investigated for different operating temperatures and frequencies. Based on such HTS receiver frontend, a 320-GHz wireless communication link was established at the UTS laboratory and demonstrated by using the QPSK and 16QAM modulations, respectively.
Wireless communication and sensing are moving from microwave, millimeter-wave into the terahertz (THz) frequency regime to meet the fast growing demand of ultrahigh data-rate communications and super resolution imaging. Faced with severe atmospheric absorption attenuation and the lack of power efficient transmitting source at the higher band, ultrasensitive and cost-effective receiver frontend technology is required for advanced THz wireless systems. To date, the most sensitive heterodyne mixers, the key components of frontend receiver systems, are based on low-temperature superconducting materials that operate at liquid helium (4.2 K) temperature range, requiring expensive and bulky cryogenic cooling systems thus hindering them from commercial applications such as wireless communications and sensing. In this article, we present a 340 GHz double-sideband fundamental mixer based on thin-film antenna-coupled high-temperature superconducting (HTS) Josephson junction that operates at a much higher temperature range attainable with smaller and cheaper cryocoolers. Based on our innovative work in terms of advanced device circuit and on-chip antenna designs, accurate parametric simulation analyses, and Josephson junction parameter optimizations, the reported mixer exhibits a measured noise temperature of 470 and 780 K at operating temperatures of 20 and 40 K respectively at 340 GHz, a performance significantly higher than any HTS THz mixers reported to date.
This paper reviews our major technical achievement in high-Tcsuperconducting (HTS) terahertz (THz) receivers or heterodyne mixers in recent years. By virtue of innovative on-chip antenna/circuit designs, accurate device modelling and simulation, and advanced YBa2Cu3O7-x (YBCO) step-edge junction technology, we have successfully developed a series of HTS Josephson THz mixers with superior performance in terms of operating temperature, intermediate-frequency (IF) bandwidth, conversion gain and noise temperature. These mixers serve as promising receiver frontends for THz wireless communication and sensing systems.
High temperature superconducting (HTS) Josephson junction (JJ) mixers are attractive candidates in receivers for terahertz (THz) communication due to their high sensitivity, wide bandwidth, low local oscillator (LO) power requirement and high harmonic numbers. The required LO frequencies and the cost can be greatly reduced when harmonic signals can be detected at high orders (more than 100). In this paper, up to 114thharmonic mixings is presented in a HTS bicrystal YBa2Cu3O7-δ(YBCO) JJ harmonic mixer coupled with a bowtie loaded meander antenna at 0.21 THz. HTS JJs will be promising high-order harmonic mixers for THz practical applications on reception or detection at THz bands.
High-Tc superconducting (HTS) receivers are promising candidates for terahertz (THz) communication applications due to their superior sensitivity and the cooling attainability with a miniature cryogenic system. Nevertheless, currently reported HTS mixers are mostly single-junction devices, and a more complicated architecture like the balanced configuration has not been investigated. This paper presents the design of a 600-GHz single-balanced HTS mixer, where detailed electromagnetic simulations are carried out to optimize the coupling efficiency and port isolation, as well as desired amplitude and phase relationship. To predict the noise and conversion performance, we present an innovative multiport network interleaving-based modeling method that enables powerful simulation verifications for single-balanced HTS Josephson mixers. Simulation results show that the presented device exhibits very good HTS mixer performance at the 600-GHz band, which validates the effectiveness of the design and the potential of the mixer for THz communication applications.
Abstract This paper presents a wideband terahertz (THz) mixer based on a thin-film antenna-coupled high-temperature superconducting (HTS) YBa 2 Cu 3 O 7−x (YBCO) step-edge Josephson junction. The HTS mixer enables the flexible harmonic mixing operation at multiple THz bands with the same microwave local oscillator (LO) source, and features very wide intermediate-frequency or instantaneous bandwidth. In order to optimize the frequency down-conversion performance of the mixer, systematic electromagnetic design and analysis have been carried out to improve the power coupling of THz radiation as well as wideband transmission of microwave signals. Experimental characterization of a fabricated device prototype has demonstrated that the mixer exhibits good performance at both the 200 GHz and 600 GHz bands. Detailed measurement results including the DC characteristics, LO pumping requirement, frequency response, mixing linearity and conversion gain are presented in this paper.
We present, in this work, a new thin-film antenna-coupled high-temperature superconducting (HTS) Josephson-junction terahertz (THz) mixer that demonstrates superior performance at frequencies around 0.34 THz. A novel dual-meander-slot thin-film antenna is designed to significantly improve the antenna-junction impedance matching and thus more efficient coupling of the THz signal power. Theoretical and experimental investigations are carried out to evaluate the mixer performance. This mixer can be applied to the sensitive THz wireless receivers.