Journal of Nonlinear Optical Physics & Materials

Controllable optical bistability based on rotation in semiconductor micro-cavity

Kousik Mukherjee, Anjan Samanta, Paresh Chandra Jana

Published Dec 8, 2021• 5 citations

Abstract

In this paper, we discuss a possibility to realize the optical bistability in a rotating semiconductor micro-cavity system. To study the mean cavity photon number profile, we have obtained stationary solution by solving Heisenberg–Langevin equations of motion. In a rotating semiconductor micro-cavity system, bistability is observed when the cavity is driven externally in one direction but not the other direction. The bistable behavior is possible for strong coupling regime, and this can be controlled by hopping strength, decay rates and pump power. The photon profile also shows tunable zero intensity window. The system may be useful to design all-optical switch and optical flip–flop i.e., optical memory element, which would be faster in applications and compact in size.

DOI: 10.1142/s0218863521500120

Related papers

Bistable optical response of a three-cavity hybrid optomechanical system: effect of Kerr nonlinearity

Hamidreza Foroughi, Nader Daneshfar

In this study, we theoretically investigate the optical bistability (OB) in hybrid triple-cavity optomechanical systems (OMSs) composed of three coupled cavities (two optical cavities and one optomechanical cavity) in the presence of semiconductor quantum dot molecules and a Kerr medium with a Kerr coefficient of χ when the optomechanical cavity is driven by a pump laser with frequency ωp and the amplitude Ep, which results in optical pressure on the movable mirror of the OMS. The dynamical equations of motion for this triple-cavity hybrid system in the steady state limit are solved using the Heisenberg-Langevin equations to achieve OB. We have demonstrated that it is possible to adjust both the width of the hysteresis loop and the switching threshold by controlling the Kerr coefficient . t is found that by properly tuning the physical parameters, the bistable thresholds of the system can be switched on and switched off, which is useful for designing and optimizing sensitive all-optical switching .

Journal of Modern OpticsMay 20, 20250 citations

Controllable bistable optical switch and normal mode splitting in hybrid optomechanical semiconductor microcavity containing single quantum dot driven by amplitude modulated field

Vijay Bhatt, Sabur A. Barbhuiya, Pradip K. Jha +1 more

Abstract We theoretically explore optical bistability for the possible signature of all-optical switching and their performance in a hybrid quantum optomechanical system comprising of two semiconductor microcavities coupled optically. One of the cavity is driven by an external amplitude-modulated pump laser while the second cavity, which contains a quantum dot (QD), is indirectly driven by light transmitted from the first cavity and a transverse optical field. The generated bistable behavior due to optomechanical nonlinearity shows a typical optical switching behavior and it can be controlled by changing the laser power, QD cavity coupling, modulating amplitude/frequency and the optomechanical coupling. A clear signature of energy exchange between the mechanical and optical modes is visible from the mechanical displacement spectrum. These results suggest that the present system can be used in sensitive optical switches and optical sensors.

Journal of Physics B Atomic Molecular and Optical PhysicsMay 11, 202022 citations

Optical bistability at lower photon number via photon and phonon interaction in the presence of Kerr nonlinearity

Zhen Wang, Xian-Kai Jiang, Heng-Mei Li +3 more

Abstract Optical bistability is theoretically analyzed in a hybrid optomechanical system consisting of an optical cavity including a Kerr medium and an optomechanical cavity coupled by direct tunnel coupling. The dynamics of the system is described by Heisenberg–Langevin equations. It is numerically shown that there is a critical value of the Kerr coefficient to observe the bistability of the intracavity intensity for a given coupling rate, and the changing of the Kerr coefficient will lead to the changing of the critical point to observe the bistability as well. In addition, the first critical value to observe bistability becomes larger with the increasing coupling rate between the two cavities. It is also demonstrated that the pump beam required to realize the bistable behavior in the blue sideband regime is significantly smaller than that in the red sideband regime. And the mean intracavity photon number is relatively larger in the red sideband case than that in the blue sideband case. It is remarkable to observe that the mean intracavity photon numbers in both cavities are much lower than that in ordinary situations.

Laser PhysicsMay 21, 20242 citations

Bistability in a Hybrid Optomechanical System under the Effect of a Nonlinear Medium

A. Asghari Nejad, Hassan Randjbar Askari, Hamid Reza Baghshahi

We investigate a hybrid optomechanical system consisting of two coupled cavities, one of them is composed of two-end fixed mirrors (called the traditional cavity), and the other has a one-end oscillating mirror (named as the optomechanical cavity). A Kerr medium is inside the traditional cavity to enhance the nonlinearity due to the fact that it can cause observing of bistable behavior in intracavity intensity for the optomechanical cavity. The Hamiltonian of the system is written in a rotating frame and its dynamics is described by quantum Langevin equations of motion. Our proposed system exhibits unconventional plots for the mean photon number of the optomechanical cavity which are not observed in previous works. The present results show a deep effect of the Kerr medium on optical bistability of intracavity intensity for the optomechanical cavity. Also, coupling strength of the cavities can effectively change the stability of the system.

Chinese Physics LettersAug 1, 20177 citations

Proposal for a compact design for real-time optical bistability switching via a semiconductor cavity containing quantum wells

Mostafa Sahrai, Solmaz Ebadollahi-Bakhtevar, Hamed Sattari

A compact design for semiconductor cavities including coupled AlGaN/AlGaAs quantum wells is proposed for all-optical switching of the bistability process. First, physical and geometrical parameters are optimized to engineer the conducting electrons' energy levels in the quantum wells. Then, finite element simulations based on Schrödinger equations are executed to estimate the states of the charge carriers for AlGaN/AlGaAs as the active region. Next, the optical coupling and pumping fields are applied to the active region to both initiate the bistability and facilitate its real-time control. The Maxwell-Bloch approach based on rotating-wave approximation is employed to analyze the optimal conditions for controlling the behavior of optical bistability (OB). It is found that the threshold of OB can be optimized to have low values by tuning the intensity of coupling fields and the rate of an incoherent pumping field. This provides a fast real-time switching facility to control output intensity of the systems. The proposed scheme could have potential applications in optical memories, in which it is paramount to have active control over the readout of the system's quantum states. Thanks to the high nonlinear response of semiconductors, the featured device would be a prospective candidate for on-chip ultrasubluminal wave propagation studies and narrowband real-time switching and filtering applications.

Applied OpticsSep 30, 20162 citations

Controllable optical bistability in a hybrid optomechanical system

Bijita Sarma, Amarendra K. Sarma

We investigate theoretically the effect of optical feedback from a cavity containing an ultracold two level atomic ensemble, on the bistable behavior shown by mean intracavity optical field in an optomechanical cavity resonator. It turns out that the optical bistability can be controlled by tuning the frequency and power of the single driving laser as well as by varying different system parameters provided by the hybrid interaction. Significantly, even though the atomic cavity is not driven by any laser pump and there is no coupling with the mechanical oscillator directly, the intracavity optical field in the atomic cavity also exhibits bistability due to the optical coupling with the optomechanical cavity. In essence, our work emphasizes the possibility of realization of a better controllable optical switch depending on the hybrid interaction.

Mar 29, 20150 citations