Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Transactions on Electronics

High-Speed Demonstration of SFQ Circuit Based on Cell-Based Design Method

A. Akahori, Masamitsu Tanaka, Sekiya Akito, Akira Fujimaki, Hisao Hayakawa

Published Nov 1, 2002• 0 citations
OpenAlex

Related papers

Design and demonstration of high-functionality logic cells for miniaturization of SFQ switches

T. Nakagawa, Y. Hashimoto, Y. Kameda +2 more

Physica C Superconductivity•May 30, 2007•5 citations

A Cell-Based Design Approach for RSFQ Circuits

Junichi Koshiyama, Nobuyuki Yoshikawa

•Oct 29, 1999•1 citation

High-Speed Demonstration of Single-Flux-Quantum Cross–Bar Switch up to 50 GHz

Y. Kameda, Shinichi Yorozu, Y. Hashimoto +3 more

We have been developing a single-flux-quantum (SFQ) cross-bar switch, which is a main component of a network packet switch. We think that a network switch is an application in which the high speed of SFQ technology would be advantageous. Anticipating general and large-scale SFQ logic circuit design, we used the cell-based design method and the CONNECT standard SFQ cell library. The two-input and two-output cross-bar switch, a core switch component, consists of 13 logic cells connected by Josephson-transmission-line (JTL) cells. Because of the large size of JTL cells and the large delay in them, timing adjustment becomes more difficult as the operating speed and circuit size increase. After using a commercially available automatic router to find appropriate routes efficiently, we used a static timing analyzer for fine timing adjustment. Timing violations were fixed by changing JTL path delays using the tools we developed. The target operating frequency of the switch was 40 GHz, which corresponds to a clock period of 25 ps. Careful timing adjustment was necessary to ensure correct operations at such a high speed. The test chip was fabricated by using an NEC standard Nb process. The circuit, including on-chip test circuitry, was composed of about 1500 Josephson junctions. We confirmed its correct operations up to 50 GHz with a bias margin of /spl plusmn/20%.

IEEE Transactions on Applied Superconductivity•Mar 1, 2005•15 citations

Demonstration of a 120 GHz single-flux-quantum shift register circuit based on a 10 kA cm−2Nb process

Hiroyuki Akaike, Takahiro Yamada, Akira Fujimaki +5 more

Designs and test results for a single-flux-quantum (SFQ) eight-bit shift register circuit operating at frequencies above 100 GHz are described. The high-speed performance was realized by introducing a planarized 10 kA cm −2 Nb fabrication process as an advanced process and by adopting middle-damped junctions with McCumber parameters β c of 1.8–2.9 in the circuit. The middle-damped junctions were used to reduce the repulsion between SFQ pulses and to adjust the timing. The circuit was designed using a cell-based design method and was tested by constructing an on-chip test system with a ladder-type four-bit high-frequency clock generator. We confirmed its correct operations up to 120 GHz.

Superconductor Science and Technology•Mar 16, 2006•33 citations

Design of SFQ Circuits and Their Measurement

Kazunori Miyahara, Shuichi Nagasawa, H. Hasegawa +3 more

IEICE Transactions on Electronics•Mar 1, 2002•0 citations

100 GHz Demonstrations Based on the Single-Flux-Quantum Cell Library for the 10 kA/cm2 Nb Multi-Layer Process

Yuki Yamanashi, Toshiki Kainuma, Nobuyuki Yoshikawa +7 more

A single flux quantum (SFQ) logic cell library has been developed for the 10kA/cm2 Nb multi-layer fabrication process to efficiently design large-scale SFQ digital circuits. In the new cell library, the critical current density of Josephson junctions is increased from 2.5kA/cm2 to 10kA/cm2 compared to our conventional cell library, and the McCumber-Stwart parameter of each Josephson junction is increased to 2 in order to increase the circuit operation speed. More than 300 cells have been designed, including fundamental logic cells and wiring cells for passive interconnects. We have measured all cells and confirmed they stably operate with wide operating margins. On-chip high-speed test of the toggle flip-flop (TFF) cell has been performed by measuring the input and output voltages. The TFF cell at the input frequency of up to 400GHz was confirmed to operate correctly. Also, several fundamental digital circuits, a 4-bit concurrent-flow shift register and a bit-serial adder have been designed using the new cell library, and the correct operations of the circuits have been demonstrated at high clock frequencies of more than 100GHz.

IEICE Transactions on Electronics•Jan 1, 2010•94 citations
We have been developing a single-flux-quantum (SFQ) cross-bar switch, which is a main component of a network packet switch. We think that a network switch is an application in which the high speed of SFQ technology would be advantageous. Anticipating general and large-scale SFQ logic circuit design, we used the cell-based design method and the CONNECT standard SFQ cell library. The two-input and two-output cross-bar switch, a core switch component, consists of 13 logic cells connected by Josephson-transmission-line (JTL) cells. Because of the large size of JTL cells and the large delay in them, timing adjustment becomes more difficult as the operating speed and circuit size increase. After using a commercially available automatic router to find appropriate routes efficiently, we used a static timing analyzer for fine timing adjustment. Timing violations were fixed by changing JTL path delays using the tools we developed. The target operating frequency of the switch was 40 GHz, which corresponds to a clock period of 25 ps. Careful timing adjustment was necessary to ensure correct operations at such a high speed. The test chip was fabricated by using an NEC standard Nb process. The circuit, including on-chip test circuitry, was composed of about 1500 Josephson junctions. We confirmed its correct operations up to 50 GHz with a bias margin of /spl plusmn/20%.
Designs and test results for a single-flux-quantum (SFQ) eight-bit shift register circuit operating at frequencies above 100 GHz are described. The high-speed performance was realized by introducing a planarized 10 kA cm −2 Nb fabrication process as an advanced process and by adopting middle-damped junctions with McCumber parameters β c of 1.8–2.9 in the circuit. The middle-damped junctions were used to reduce the repulsion between SFQ pulses and to adjust the timing. The circuit was designed using a cell-based design method and was tested by constructing an on-chip test system with a ladder-type four-bit high-frequency clock generator. We confirmed its correct operations up to 120 GHz.
A single flux quantum (SFQ) logic cell library has been developed for the 10kA/cm2 Nb multi-layer fabrication process to efficiently design large-scale SFQ digital circuits. In the new cell library, the critical current density of Josephson junctions is increased from 2.5kA/cm2 to 10kA/cm2 compared to our conventional cell library, and the McCumber-Stwart parameter of each Josephson junction is increased to 2 in order to increase the circuit operation speed. More than 300 cells have been designed, including fundamental logic cells and wiring cells for passive interconnects. We have measured all cells and confirmed they stably operate with wide operating margins. On-chip high-speed test of the toggle flip-flop (TFF) cell has been performed by measuring the input and output voltages. The TFF cell at the input frequency of up to 400GHz was confirmed to operate correctly. Also, several fundamental digital circuits, a 4-bit concurrent-flow shift register and a bit-serial adder have been designed using the new cell library, and the correct operations of the circuits have been demonstrated at high clock frequencies of more than 100GHz.