Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

SPDC Correlated Photon Source Filtered for Narrowed Bandwidth using Volume Bragg Grating

Oliver Slattery, Paulina S. Kuo, Yong‐Su Kim, Lijun Ma, Xiao Hong Tang

Published Nov 5, 2012• 0 citations
OpenAlex

Abstract

A Volume Bragg Grating (VBG) can be used to efficiently extract a narrow bandwidth, highly collimated beam from an otherwise broad spectrum beam. We use a VBG to extract a narrow bandwidth of signal spectrum from a broadband Spontaneous Parametric Down-Conversion source to optimally match the narrow detection bandwidth of our idler upconversion detector. Improved coincidence count rates and visibility can be achieved when limiting signal-spectrum detection to the narrow signal bandwidth whose photons are correlated with a narrow idler-spectrum bandwidth that has been selected by the up-conversion detector. We compare coincidence count rate and visibility for when the entire signal spectrum is detected and when the spectrum has been filtered by the VBG. We further relax the collection techniques and show that following the VBG, the coincidence count rate improves with minimal loss in visibility compared to when the entire spectrum is detected. We introduce our initial efforts at using the VBG to further narrow the signal spectrum by placing it inside a multipass cavity. Additionally, we further adapt the single photon level up-conversion spectrometer, previously developed for idler spectrum measurement, to indirectly measure the single photon level signal spectrum. We verify its capability for several different wavelength and linewidth selections.

Related papers

SPDC correlated photon source filtered for narrowed bandwidth using volume Bragg grating

Oliver Slattery, Paulina S. Kuo, Yong‐Su Kim +2 more

A Volume Bragg Grating (VBG) can be used to efficiently extract a narrow bandwidth, highly collimated beam from an otherwise broad spectrum beam. We use a VBG to extract a narrow bandwidth of signal spectrum from a broadband Spontaneous Parametric Down-Conversion source to optimally match the narrow detection bandwidth of our idler upconversion detector. Improved coincidence count rates and visibility can be achieved when limiting signal-spectrum detection to the narrow signal bandwidth whose photons are correlated with a narrow idler-spectrum bandwidth that has been selected by the up-conversion detector. We compare coincidence count rate and visibility for when the entire signal spectrum is detected and when the spectrum has been filtered by the VBG. We further relax the collection techniques and show that following the VBG, the coincidence count rate improves with minimal loss in visibility compared to when the entire spectrum is detected. We introduce our initial efforts at using the VBG to further narrow the signal spectrum by placing it inside a multipass cavity. Additionally, we further adapt the single photon level up-conversion spectrometer, previously developed for idler spectrum measurement, to indirectly measure the single photon level signal spectrum. We verify its capability for several different wavelength and linewidth selections.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 15, 2012•2 citations

1064-μm-band up-conversion single-photon detector

Fei Ma, Ming-Yang Zheng, Quan Yao +3 more

Based on the technique of periodically poled lithium niobate waveguide, up-conversion single-photon detection at 1.064-μm is demonstrated. We have achieved a system photon detection efficiency of 32.5% with a very low noise count rate of 45 counts per second by pumping with a 1.55-μm-band single frequency laser using the long-wavelength pumping technique and exploiting volume Bragg grating as a narrow band filter. Replacing the volume Bragg grating with a combination of adequate dielectric filters, a detection efficiency of up to 38% with a noise count rate of 700 counts per second is achieved, making the overall system stable and practical. The up-conversion single-photon detector operating at 1.064 μm can be a promising robust counter and find usage in many fields.

arXiv:1703.10838•Optics Express•Jun 16, 2017•15 citations

Narrow-band photon pairs generated from spontaneous parametric down conversion in a Bragg-grating enhanced waveguide

Yan Li, Lijun Ma, Xiao Hong Tang

We propose a new method to narrow the linewidth of photon pairs generated from spontaneous parametric down conversion (SPDC). The single structure device incorporates an internal Bragg grating onto a nonlinear optical waveguide. We study theoretically the spectral characteristics of SPDC under two Bragg grating structures. We show that using the Bragg grating with a midway π- phase shifter is a promising way to implement narrow-line (~GHz to sub-GHz) entangled photon sources.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 29, 2010•3 citations

Enhancing the detectivity of an upconversion single-photon detector by spatial filtering of upconverted parametric fluorescence

Lichun Meng, Lasse Høgstedt, Peter Tidemand‐Lichtenberg +2 more

Due to advantages of low dark-count rate, reduced dead-time, and room-temperature operation, single-photon upconversion detectors for the telecom band are gaining strong interest as an alternative to other single-photon counters. In this work, we investigate the spatial and spectral distribution of upconverted spontaneous parametric downconversion (USPDC) noise, which is the typical dominant noise source in short-wavelength-pumped single-photon upconversion detectors for 1.5 µm - 1.6 µm. Our upconversion detector relies on a bulk periodically poled lithium niobate (PPLN) crystal and a 1064 nm intracavity pump system that spectrally translates the signal to the visible (~630 nm) where efficient, uncooled, and low dark-count Si based single-photon detectors operate. Experimental results show that the spectral and spatial distribution of the USPDC noise has a relatively broadband and radially modulated pattern that depends on the PPLN temperature, which is in good agreement with our numerical simulations. We also demonstrate that for narrow-linewidth 1575 nm signal photons, the dark-count rate can be significantly reduced by (1) using a phase-matched signal angle that corresponds to an upconverted output angle where the USPDC noise is at a "local minimum" and (2) applying a spatial filter (instead of an ultra-narrow bandpass filter) at the output. This simple spatial filtering technique resulted in a 14 dB dark-count rate reduction. Due to a corresponding decrease in the interaction length of the signal with the pump, the upconversion efficiency also decreased, but only with a 2.2 dB penalty.

Optics Express•Sep 6, 2018•15 citations

Upconversion single photon detection near 2 um

Guo-Liang Shentu, Xiu-Xiu Xia, Qi-Chao Sun +4 more

We have demonstrated upconversion detection at the single photon level in the 2 um spectral window using a pump wavelength near 1550nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 um single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.

arXiv:1310.7422•Oct 28, 2013•1 citation

Upconversion detection near 2 μm at the single photon level

Guo-Liang Shentu, Xiu-Xiu Xia, Qi-Chao Sun +4 more

We have demonstrated upconversion detection at the single photon level in the 2 μm spectral window using a pump wavelength near 1550 nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 μm single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.

Optics Letters•Nov 19, 2013•22 citations
A Volume Bragg Grating (VBG) can be used to efficiently extract a narrow bandwidth, highly collimated beam from an otherwise broad spectrum beam. We use a VBG to extract a narrow bandwidth of signal spectrum from a broadband Spontaneous Parametric Down-Conversion source to optimally match the narrow detection bandwidth of our idler upconversion detector. Improved coincidence count rates and visibility can be achieved when limiting signal-spectrum detection to the narrow signal bandwidth whose photons are correlated with a narrow idler-spectrum bandwidth that has been selected by the up-conversion detector. We compare coincidence count rate and visibility for when the entire signal spectrum is detected and when the spectrum has been filtered by the VBG. We further relax the collection techniques and show that following the VBG, the coincidence count rate improves with minimal loss in visibility compared to when the entire spectrum is detected. We introduce our initial efforts at using the VBG to further narrow the signal spectrum by placing it inside a multipass cavity. Additionally, we further adapt the single photon level up-conversion spectrometer, previously developed for idler spectrum measurement, to indirectly measure the single photon level signal spectrum. We verify its capability for several different wavelength and linewidth selections.
A Volume Bragg Grating (VBG) can be used to efficiently extract a narrow bandwidth, highly collimated beam from an otherwise broad spectrum beam. We use a VBG to extract a narrow bandwidth of signal spectrum from a broadband Spontaneous Parametric Down-Conversion source to optimally match the narrow detection bandwidth of our idler upconversion detector. Improved coincidence count rates and visibility can be achieved when limiting signal-spectrum detection to the narrow signal bandwidth whose photons are correlated with a narrow idler-spectrum bandwidth that has been selected by the up-conversion detector. We compare coincidence count rate and visibility for when the entire signal spectrum is detected and when the spectrum has been filtered by the VBG. We further relax the collection techniques and show that following the VBG, the coincidence count rate improves with minimal loss in visibility compared to when the entire spectrum is detected. We introduce our initial efforts at using the VBG to further narrow the signal spectrum by placing it inside a multipass cavity. Additionally, we further adapt the single photon level up-conversion spectrometer, previously developed for idler spectrum measurement, to indirectly measure the single photon level signal spectrum. We verify its capability for several different wavelength and linewidth selections.
Based on the technique of periodically poled lithium niobate waveguide, up-conversion single-photon detection at 1.064-μm is demonstrated. We have achieved a system photon detection efficiency of 32.5% with a very low noise count rate of 45 counts per second by pumping with a 1.55-μm-band single frequency laser using the long-wavelength pumping technique and exploiting volume Bragg grating as a narrow band filter. Replacing the volume Bragg grating with a combination of adequate dielectric filters, a detection efficiency of up to 38% with a noise count rate of 700 counts per second is achieved, making the overall system stable and practical. The up-conversion single-photon detector operating at 1.064 μm can be a promising robust counter and find usage in many fields.
Due to advantages of low dark-count rate, reduced dead-time, and room-temperature operation, single-photon upconversion detectors for the telecom band are gaining strong interest as an alternative to other single-photon counters. In this work, we investigate the spatial and spectral distribution of upconverted spontaneous parametric downconversion (USPDC) noise, which is the typical dominant noise source in short-wavelength-pumped single-photon upconversion detectors for 1.5 µm - 1.6 µm. Our upconversion detector relies on a bulk periodically poled lithium niobate (PPLN) crystal and a 1064 nm intracavity pump system that spectrally translates the signal to the visible (~630 nm) where efficient, uncooled, and low dark-count Si based single-photon detectors operate. Experimental results show that the spectral and spatial distribution of the USPDC noise has a relatively broadband and radially modulated pattern that depends on the PPLN temperature, which is in good agreement with our numerical simulations. We also demonstrate that for narrow-linewidth 1575 nm signal photons, the dark-count rate can be significantly reduced by (1) using a phase-matched signal angle that corresponds to an upconverted output angle where the USPDC noise is at a "local minimum" and (2) applying a spatial filter (instead of an ultra-narrow bandpass filter) at the output. This simple spatial filtering technique resulted in a 14 dB dark-count rate reduction. Due to a corresponding decrease in the interaction length of the signal with the pump, the upconversion efficiency also decreased, but only with a 2.2 dB penalty.
We have demonstrated upconversion detection at the single photon level in the 2 um spectral window using a pump wavelength near 1550nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 um single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.
We have demonstrated upconversion detection at the single photon level in the 2 μm spectral window using a pump wavelength near 1550 nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 μm single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.