Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Dissipative quantum feedback in micro-cavity spectroscopy

Liu Qiu, Guanhao Huang, Itay Shomroni, Jiahe Pan, Paul F. Seidler, Tobias Jan Kippenberg

Published Sep 29, 2021• 0 citations
OpenAlex

Abstract

Microcavities are used in a wide range of classical and quantum applications, from precision measurements, laser technologies, to control of mechanical motion. The dissipative photon loss via absorption, ubiquitous in any optical cavity, is known to introduce thermo-optical effects and impose fundamental limits on precision measurements. We reveal that such dissipative photon absorption can lead to a quantum feedback, via in-loop field detection of the absorbed optical field, whose field fluctuations can be squashed or anti-squashed. A closed-loop dissipative quantum feedback to the cavity field arises. This modifies the optical cavity susceptibility and causes excess noise and correlations when performing coherent response and quantum optomechanical measurements. We experimentally observe such unanticipated dissipative dynamics in optomechanical spectroscopy of sideband-cooled optomechanical crystals at cryogenic temperature ($\sim$ 8K) and ambient conditions. The dissipative feedback introduces effective modifications to the optical cavity linewidth and the optomechanical scattering rate, and gives rise to excess imprecision noise in the interferometric quantum measurement of mechanical motion. Such dissipative feedback differs fundamentally from a quantum non-demolition feedback, e.g. optical Kerr squeezing. The dissipative feedback itself always results in anti-squeezed out-of-loop optical field, while it can improve the coexisting Kerr squeezing under certain conditions. Our result applies to cavity spectroscopy in both optical and superconducting microwave cavities , and equally applies to any dissipative feedback mechanism of different bandwidth inside the cavity. It has wide-ranging implications for future dissipation engineering, such as dissipation enhanced sideband cooling and Kerr squeezing, quantum frequency conversion, and nonreciprocity in photonic systems.

Related papers

Dissipative Quantum Feedback in Measurements Using a Parametrically Coupled Microcavity

Liu Qiu, Guanhao Huang, Itay Shomroni +3 more

Excess noise correlation in quantum optomechanical measurements due to in-loop photon absorption in micro-cavities is experimentally measured, and its prospect for improved optical Kerr squeezing is analyzed.

arXiv:2109.14482•PRX Quantum•Apr 13, 2022•17 citations

Squeezed light and coherent feedback enhanced multiparameter quantum estimation in a double-cavity optomechanics: steady and dynamical states

Hamza Harraf, Mohamed Amazioug, Amjad Sohail +2 more

Multiparameter quantum estimation in open optomechanical systems is fundamentally constrained by dissipation, thermal fluctuations, and measurement incompatibility. In this work, we investigate a coupled cavity optomechanical platform in which two mechanical modes interact with driven optical cavities, two mode squeezed vacuum, intracavity degenerate parametric amplification, and coherent optical feedback. Using the continuous variable Gaussian state formalism, we derive the linearized quantum Langevin dynamics and steady state covariance matrix and evaluate the quantum Fisher information matrices associated with simultaneous estimation of the optomechanical coupling strength and cavity dissipation rate. We characterize the precision bounds using the symmetric and right logarithmic derivative formalisms and employ $\mathcal{B}_{\rm MI}=\max\{\mathcal{B}_S,\mathcal{B}_R\}$ as a comparative figure of merit within the SLD/RLD framework. We find that parametric amplification can substantially reduce the most informative bound, $\mathcal{B}_{\rm MI}$, thereby enhancing multiparameter estimation precision over a broad range of operating conditions. Coherent feedback can further reduce $\mathcal{B}_{\rm MI}$ and improve the estimation precision, particularly in the strong feedback regime. Moreover, the simultaneous presence of coherent feedback, parametric amplification, and squeezed light injection provides a combined mechanism for controlling quantum fluctuations and parameter dependent correlations, leading to enhanced and more robust multiparameter estimation. We further analyze the dynamical and steady state regimes to identify the parameter regions in which these quantum resources provide the largest metrological gain. Our results establish coupled cavity optomechanics as a flexible platform for quantum-noise engineering in multiparameter sensing.

quant-pharXiv:2609.05402•Sep 7, 2026•0 citations

A Loop-Shaping Approach to Coherent Feedback Control in Cavity Optomechanical Cooling

Aoi Fujimoto, Hiroyuki Ichihara, Rina Kanamoto

We present a loop-shaping approach to coherent feedback (CF) control. By formulating the coupling between a quantum system and its environment in terms of the noise power spectrum, our method enables direct manipulation of the effective dissipation coefficients through spectral shaping. A systematic design framework for CF controllers is also developed, in which transfer functions are shaped to realize desired spectral responses. Applying this framework to optomechanical sideband cooling, we demonstrate that suppression of the Stokes process and enhancement of the anti-Stokes process can be simultaneously achieved, enabling ground-state cooling even in the unresolved-sideband regime. This loop-shaping framework provides an intuitive and general foundation for the design of CF controllers and can be extended to a wide class of quantum systems in which interactions with environments are characterized by noise power spectra.

quant-pharXiv:2604.01891•Apr 3, 2026•0 citations

Cavity optomechanics assisted by optical coherent feedback

Alfred Harwood, Matteo Brunelli, Alessio Serafini

We consider a wide family of optical coherent feedback loops acting on an optomechanical system operating in the linearized regime. We assess the efficacy of such loops in improving key operations, such as cooling, steady-state squeezing and entanglement, as well as optical-to-mechanical state transfer. We find that mechanical sideband cooling can be enhanced through passive, interferometric coherent feedback, achieving lower steady-state occupancies and considerably speeding up the cooling process; we also quantify the detrimental effect of nonzero delay times on the cooling performance. Steady-state entanglement generation in the blue sideband can also be assisted by passive interferometric feedback, which allows one to stabilize otherwise unstable systems, though active feedback (including squeezing elements) does not help to this aim. We show that active feedback loops only allow for the generation of optical, but not mechanical, squeezing. Finally, we prove that passive feedback can assist state transfer at transient times for red-sideband-driven systems in the strong-coupling regime.

arXiv:2011.11585•Physical Review A•Feb 9, 2021•32 citations

Quantum optomechanics at room temperature

H. Schütz

Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity $\sim\!10^4$ times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.

•Jan 1, 2017•0 citations

Force Sensing in an Optomechanical System with Feedback-Controlled In-Loop Light

F. Bemani, Ondřej Černotík, László Ruppert +2 more

Quantum control techniques applied at macroscopic scales provide us with opportunities in fundamental physics and practical applications. Among them, measurement-based feedback allows efficient control of optomechanical systems and quantum-enhanced sensing. In this paper, we propose a near-resonant narrow-band force sensor with extremely low optically added noise in a membrane in the middle optomechanical system subject to a feedback-controlled in-loop light. The membrane's intrinsic motion consisting of zero-point motion and thermal motion is affected by the added noise of measurement due to the backaction noise and imprecision noise. We show that, in the optimal low-noise regime, the system is analogous to an optomechanical system containing a near quantum-limited optical parametric amplifier coupled to an engineered reservoir interacting with the cavity. Therefore, the feedback loop enhances the mechanical response of the system to the input while keeping the optically added noise of measurement below the standard quantum limit. Moreover, the system based on feedback offers a much larger amplification bandwidth than the same system with no feedback. Without the need to hybridize it with other quantum systems or introduce nonlinearities, our force sensor may have broad applications ranging from biology and medicine to gravitational wave detection and tests of fundamental physics.

arXiv:2106.11199•Physical Review Applied•Mar 7, 2022•33 citations
Microcavities are used in a wide range of classical and quantum applications, from precision measurements, laser technologies, to control of mechanical motion. The dissipative photon loss via absorption, ubiquitous in any optical cavity, is known to introduce thermo-optical effects and impose fundamental limits on precision measurements. We reveal that such dissipative photon absorption can lead to a quantum feedback, via in-loop field detection of the absorbed optical field, whose field fluctuations can be squashed or anti-squashed. A closed-loop dissipative quantum feedback to the cavity field arises. This modifies the optical cavity susceptibility and causes excess noise and correlations when performing coherent response and quantum optomechanical measurements. We experimentally observe such unanticipated dissipative dynamics in optomechanical spectroscopy of sideband-cooled optomechanical crystals at cryogenic temperature (∼\sim∼ 8K) and ambient conditions. The dissipative feedback introduces effective modifications to the optical cavity linewidth and the optomechanical scattering rate, and gives rise to excess imprecision noise in the interferometric quantum measurement of mechanical motion. Such dissipative feedback differs fundamentally from a quantum non-demolition feedback, e.g. optical Kerr squeezing. The dissipative feedback itself always results in anti-squeezed out-of-loop optical field, while it can improve the coexisting Kerr squeezing under certain conditions. Our result applies to cavity spectroscopy in both optical and superconducting microwave cavities , and equally applies to any dissipative feedback mechanism of different bandwidth inside the cavity. It has wide-ranging implications for future dissipation engineering, such as dissipation enhanced sideband cooling and Kerr squeezing, quantum frequency conversion, and nonreciprocity in photonic systems.
Multiparameter quantum estimation in open optomechanical systems is fundamentally constrained by dissipation, thermal fluctuations, and measurement incompatibility. In this work, we investigate a coupled cavity optomechanical platform in which two mechanical modes interact with driven optical cavities, two mode squeezed vacuum, intracavity degenerate parametric amplification, and coherent optical feedback. Using the continuous variable Gaussian state formalism, we derive the linearized quantum Langevin dynamics and steady state covariance matrix and evaluate the quantum Fisher information matrices associated with simultaneous estimation of the optomechanical coupling strength and cavity dissipation rate. We characterize the precision bounds using the symmetric and right logarithmic derivative formalisms and employ BMI=max⁡{BS,BR}\mathcal{B}_{\rm MI}=\max\{\mathcal{B}_S,\mathcal{B}_R\}BMI​=max{BS​,BR​} as a comparative figure of merit within the SLD/RLD framework. We find that parametric amplification can substantially reduce the most informative bound, BMI\mathcal{B}_{\rm MI}BMI​, thereby enhancing multiparameter estimation precision over a broad range of operating conditions. Coherent feedback can further reduce BMI\mathcal{B}_{\rm MI}BMI​ and improve the estimation precision, particularly in the strong feedback regime. Moreover, the simultaneous presence of coherent feedback, parametric amplification, and squeezed light injection provides a combined mechanism for controlling quantum fluctuations and parameter dependent correlations, leading to enhanced and more robust multiparameter estimation. We further analyze the dynamical and steady state regimes to identify the parameter regions in which these quantum resources provide the largest metrological gain. Our results establish coupled cavity optomechanics as a flexible platform for quantum-noise engineering in multiparameter sensing.
We present a loop-shaping approach to coherent feedback (CF) control. By formulating the coupling between a quantum system and its environment in terms of the noise power spectrum, our method enables direct manipulation of the effective dissipation coefficients through spectral shaping. A systematic design framework for CF controllers is also developed, in which transfer functions are shaped to realize desired spectral responses. Applying this framework to optomechanical sideband cooling, we demonstrate that suppression of the Stokes process and enhancement of the anti-Stokes process can be simultaneously achieved, enabling ground-state cooling even in the unresolved-sideband regime. This loop-shaping framework provides an intuitive and general foundation for the design of CF controllers and can be extended to a wide class of quantum systems in which interactions with environments are characterized by noise power spectra.
We consider a wide family of optical coherent feedback loops acting on an optomechanical system operating in the linearized regime. We assess the efficacy of such loops in improving key operations, such as cooling, steady-state squeezing and entanglement, as well as optical-to-mechanical state transfer. We find that mechanical sideband cooling can be enhanced through passive, interferometric coherent feedback, achieving lower steady-state occupancies and considerably speeding up the cooling process; we also quantify the detrimental effect of nonzero delay times on the cooling performance. Steady-state entanglement generation in the blue sideband can also be assisted by passive interferometric feedback, which allows one to stabilize otherwise unstable systems, though active feedback (including squeezing elements) does not help to this aim. We show that active feedback loops only allow for the generation of optical, but not mechanical, squeezing. Finally, we prove that passive feedback can assist state transfer at transient times for red-sideband-driven systems in the strong-coupling regime.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼ ⁣104\sim\!10^4∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.
Quantum control techniques applied at macroscopic scales provide us with opportunities in fundamental physics and practical applications. Among them, measurement-based feedback allows efficient control of optomechanical systems and quantum-enhanced sensing. In this paper, we propose a near-resonant narrow-band force sensor with extremely low optically added noise in a membrane in the middle optomechanical system subject to a feedback-controlled in-loop light. The membrane's intrinsic motion consisting of zero-point motion and thermal motion is affected by the added noise of measurement due to the backaction noise and imprecision noise. We show that, in the optimal low-noise regime, the system is analogous to an optomechanical system containing a near quantum-limited optical parametric amplifier coupled to an engineered reservoir interacting with the cavity. Therefore, the feedback loop enhances the mechanical response of the system to the input while keeping the optically added noise of measurement below the standard quantum limit. Moreover, the system based on feedback offers a much larger amplification bandwidth than the same system with no feedback. Without the need to hybridize it with other quantum systems or introduce nonlinearities, our force sensor may have broad applications ranging from biology and medicine to gravitational wave detection and tests of fundamental physics.