Microcavities are used in a wide range of classical and quantum applications, from precision measurements, laser technologies, to control of mechanical motion. The dissipative photon loss via absorption, ubiquitous in any optical cavity, is known to introduce thermo-optical effects and impose fundamental limits on precision measurements. We reveal that such dissipative photon absorption can lead to a quantum feedback, via in-loop field detection of the absorbed optical field, whose field fluctuations can be squashed or anti-squashed. A closed-loop dissipative quantum feedback to the cavity field arises. This modifies the optical cavity susceptibility and causes excess noise and correlations when performing coherent response and quantum optomechanical measurements. We experimentally observe such unanticipated dissipative dynamics in optomechanical spectroscopy of sideband-cooled optomechanical crystals at cryogenic temperature (
∼ 8K) and ambient conditions. The dissipative feedback introduces effective modifications to the optical cavity linewidth and the optomechanical scattering rate, and gives rise to excess imprecision noise in the interferometric quantum measurement of mechanical motion. Such dissipative feedback differs fundamentally from a quantum non-demolition feedback, e.g. optical Kerr squeezing. The dissipative feedback itself always results in anti-squeezed out-of-loop optical field, while it can improve the coexisting Kerr squeezing under certain conditions. Our result applies to cavity spectroscopy in both optical and superconducting microwave cavities , and equally applies to any dissipative feedback mechanism of different bandwidth inside the cavity. It has wide-ranging implications for future dissipation engineering, such as dissipation enhanced sideband cooling and Kerr squeezing, quantum frequency conversion, and nonreciprocity in photonic systems.
Multiparameter quantum estimation in open optomechanical systems is fundamentally constrained by dissipation, thermal fluctuations, and measurement incompatibility. In this work, we investigate a coupled cavity optomechanical platform in which two mechanical modes interact with driven optical cavities, two mode squeezed vacuum, intracavity degenerate parametric amplification, and coherent optical feedback. Using the continuous variable Gaussian state formalism, we derive the linearized quantum Langevin dynamics and steady state covariance matrix and evaluate the quantum Fisher information matrices associated with simultaneous estimation of the optomechanical coupling strength and cavity dissipation rate. We characterize the precision bounds using the symmetric and right logarithmic derivative formalisms and employ
BMI=max{BS,BR} as a comparative figure of merit within the SLD/RLD framework. We find that parametric amplification can substantially reduce the most informative bound,
BMI, thereby enhancing multiparameter estimation precision over a broad range of operating conditions. Coherent feedback can further reduce
BMI and improve the estimation precision, particularly in the strong feedback regime. Moreover, the simultaneous presence of coherent feedback, parametric amplification, and squeezed light injection provides a combined mechanism for controlling quantum fluctuations and parameter dependent correlations, leading to enhanced and more robust multiparameter estimation. We further analyze the dynamical and steady state regimes to identify the parameter regions in which these quantum resources provide the largest metrological gain. Our results establish coupled cavity optomechanics as a flexible platform for quantum-noise engineering in multiparameter sensing.
Quantum control techniques applied at macroscopic scales provide us with opportunities in fundamental physics and practical applications. Among them, measurement-based feedback allows efficient control of optomechanical systems and quantum-enhanced sensing. In this paper, we propose a near-resonant narrow-band force sensor with extremely low optically added noise in a membrane in the middle optomechanical system subject to a feedback-controlled in-loop light. The membrane's intrinsic motion consisting of zero-point motion and thermal motion is affected by the added noise of measurement due to the backaction noise and imprecision noise. We show that, in the optimal low-noise regime, the system is analogous to an optomechanical system containing a near quantum-limited optical parametric amplifier coupled to an engineered reservoir interacting with the cavity. Therefore, the feedback loop enhances the mechanical response of the system to the input while keeping the optically added noise of measurement below the standard quantum limit. Moreover, the system based on feedback offers a much larger amplification bandwidth than the same system with no feedback. Without the need to hybridize it with other quantum systems or introduce nonlinearities, our force sensor may have broad applications ranging from biology and medicine to gravitational wave detection and tests of fundamental physics.
We report an efficient mechanism to generate a squeezed state of a mechanical mirror in an optomechanical system. We use an especially tuned parametric amplifier (PA) inside the cavity and the parametric photon phonon processes to transfer quantum squeezing from photons to phonons with almost 100% efficiency. We get 50% squeezing of the mechanical mirror which is limited by the PA. We present analytical results for the mechanical squeezing thus enabling one to understand the dependence of squeezing on system parameters like gain of PA, cooperativity, and temperature. As in cooling experiments the detrimental effects of mirror's Brownian and zero point noises are strongly suppressed by the pumping power. By judicious choice of the phases, the cavity output is squeezed only if the mirror is squeezed thus providing us a direct measure of the mirror's squeezing. Further considerable larger squeezing of the mirror can be obtained by adding the known feedback techniques.
It is well-known that some nonlinear phenomena such as strong photon blockade are hard to be observed in optomechanical system with current experimental technology. Here, we present a coherent feedback control strategy in which a linear cavity is coherently controlled by an optomechanical controller in a feedback manner. The coherent feedback loop transfers and enhances quantum nonlinearity from the controller to the controlled cavity, which makes it possible to observe strong nonlinear effects in either linear cavity or optomechanical cavity. More interestingly, we find that the strong photon blockade under single-photon optomechanical weak coupling condition could be observed in the quantum regime. Additionally, the coherent feedback loop leads to two-photon and multiphoton tunnelings for the controlled linear cavity, which are also typical quantum nonlinear phenomenon. We hope that our work can give new perspectives in engineering nonlinear quantum phenomena.
Abstract In this paper, we propose a continuous measurement and feedback scheme to achieve strong Einstein–Podolsky–Rosen (EPR) steering and Bell nonlocality of two macroscopic mechanical oscillators in cavity optomechanics. Our system consists of two optomechanical cavities in which two cavity fields are coupled to each other via nondegenerate parametric downconversion. The two cavity output fields are subject to continuous Bell-like homodyne detection and the detection currents are fed back to drive the cavity fields. It is found that when the feedback is absent, the two mechanical oscillators can only be prepared in steady weakly entangled states which however do not display EPR steering and Bell nonlocality, due to the so-called 3 dB limit. But when the feedback is present, it is found that the mechanical entanglement is considerably enhanced such that strong mechanical steering and Bell nonlocality can be obtained in the steady-state regime. We analytically reveal that this is because the feedback drives the mechanical oscillators into a steady approximate two-mode squeezed vacuum state, with arbitrary squeezing in principle. It is shown that the feedback can also obviously improve the purity of the nonclassical mechanical states. The dependences of the mechanical quantum nonlocality on the feedback strength and thermal fluctuations are studied, and it is found that Bell nonlocality is much more vulnerable to thermal noise than EPR steerable nonlocality.