Among the possible defects that can occur in diamonds, one that draws attention is the nitrogen-vacancy (NV) center.Studied since the early 90s, in recent years, they became one of the most promising platforms for field applications of quantum technology at room temperature, especially for quantum sensing.They are sensitive to electric and magnetic fields, temperature, and strain, making these nanosensors a versatile platform for many applications.The NV center's spin state is easy to read and manipulate by optical means, and, most interestingly, it works well at room temperature, which facilitates its use.The great challenge to implement quantum protocols and quantum algorithms is the coherence time of the quantum states.The NV center stands out for having relatively high coherence times at room temperature.This dissertation presents measurements to characterize the electron spin coherence of NV centers in an ultrapure sample of diamond designed for quantum sensing applications.These measurements combine optical e magnetic resonance techniques.For that, a method was implemented using a conventional CCD camera and a clever imaging protocol, making it possible to perform various pulsed microwave experiments on the electron spin, such as Rabi oscillations and Hahn spin-echo, which were used for determining the characteristic relaxation times (T 1 and T 2 ).Results show that this system provides at least two readily accessible qubits that can be used in quantum protocols even at room temperature.
Among the possible defects that can occur in diamonds, one that draws attention is the nitrogen-vacancy (NV) center.Studied since the early 90s, in recent years, they became one of the most promising platforms for field applications of quantum technology at room temperature, especially for quantum sensing.They are sensitive to electric and magnetic fields, temperature, and strain, making these nanosensors a versatile platform for many applications.The NV center's spin state is easy to read and manipulate by optical means, and, most interestingly, it works well at room temperature, which facilitates its use.The great challenge to implement quantum protocols and quantum algorithms is the coherence time of the quantum states.The NV center stands out for having relatively high coherence times at room temperature.This dissertation presents measurements to characterize the electron spin coherence of NV centers in an ultrapure sample of diamond designed for quantum sensing applications.These measurements combine optical e magnetic resonance techniques.For that, a method was implemented using a conventional CCD camera and a clever imaging protocol, making it possible to perform various pulsed microwave experiments on the electron spin, such as Rabi oscillations and Hahn spin-echo, which were used for determining the characteristic relaxation times (T 1 and T 2 ).Results show that this system provides at least two readily accessible qubits that can be used in quantum protocols even at room temperature.
Among the possible defects that can occur in diamonds, one that draws attention is the nitrogen-vacancy (NV) center. Studied since the early 90s, in recent years, they became one of the most promising platforms for field applications of quantum technology at room temperature, especially for quantum sensing. They are sensitive to electric and magnetic fields, temperature, and strain, making these nanosensors a versatile platform for many applications. The NV center´s spin state is easy to read and manipulate by optical means, and, most interestingly, it works well at room temperature, which facilitates its use. The great challenge to implement quantum protocols and quantum algorithms is the coherence time of the quantum states. The NV center stands out for having relatively high coherence times at room temperature.This dissertation presents measurements to characterize the electron spin coherence of NV centers in an ultrapure sample of diamond designed for quantum sensing applications. These measurements combine optical e magnetic resonance techniques. For that, a method was implemented using a conventional CCD camera and a clever imaging protocol, making it possible to perform various pulsed microwave experiments on the electron spin, such as Rabi oscillations and Hahn spin-echo, which were used for determining the characteristic relaxation times (T1 and T2). Results show that this system provides at least two readily accessible qubits that can be used in quantum protocols even at room temperature.
In recent years, nitrogen-vacancy (NV) color centers in diamond have become excellent solid-state quantum sensors due to their electronic spin properties. Especially for their easy optical initialization and detection, together with their very large spin coherence at room temperature. Many studies have reported their use for sensing temperature, strain, electric fields, and mainly magnetic fields. Here, we show how to build a two-dimensional map of the electronic spin coherence of an ensemble of NV centers in ultra-pure diamond, using an optical imaging protocol combined with microwave pulses relying simply on a regular CCD camera.
One of the biggest challenges to implement quantum protocols and quantum information processing (QIP) is achieving long coherence times, usually requiring systems at ultra-low temperatures. The nitrogen-vacancy (NV) center in diamond is a promising alternative to this problem. Due to its spin properties, easy manipulation, and the possibility of doing optical state initialization and readout, it quickly became one of the best solid-state spin systems for QIP at room temperature. Here, we present the characterization of the spin-coherence of an ensemble of NV centers in an engineered sample of ultrapure diamond as a testbed for quantum protocols for quantum metrology.
This thesis investigates the theoretical foundations, material properties, and experimental realization of quantum sensors based on the Nitrogen-Vacancy (NV) centers in diamond, a solid-state system that combines quantum coherence with room-temperature operability. The first chapter introduces the principles of quantum sensing, outlining the fundamental definitions, operating protocols, and physical processes underlying the quantum measurement paradigm. Emphasis is placed on the quantum sensing Hamiltonian and the distinction between various classes of quantum sensors. The second chapter focuses on diamond as a host material and on the NV center as a quantum defect. The electronic structure, optical transitions, and spin properties of the NV center are analyzed in detail. Several techniques of NV-based magnetometry are presented, including continuouswave and pulsed optically detected magnetic resonance (ODMR). The discussion also addresses coherence times (T1, T2, and T∗2 ) and methods of diamond synthesis together with NV-center generation through irradiation and annealing. Chapter three develops the physical theory describing the NV center. The Hamiltonian formalism includes spin-spin, hyperfine, and quadrupolar interactions, as well as couplings to external magnetic fields. The chapter further introduces the Bloch sphere representation, magnetic resonance phenomena, and models of lightmatter interaction, ranging from the semiclassical to the fully quantum Rabi framework. A seven-level rate-equation model is proposed to capture the spin dynamics and optical cycling processes of the NV center. The fourth chapter reports the experimental results. After describing materials and methods, several ODMR-based vector magnetometry experiments are presented, highlighting different spectral regimes and the dependence of resonance features on the external magnetic field geometry. Additional studies demonstrate temperature sensing and microwave-free magnetometry techniques for mapping magnetic field distributions. Sensitivity analysis and calibration procedures are also discussed.
Among several hundred impurities and defects that can occur in diamond, the nitrogenvacancy (NV) center is one of the most interesting for quantum technologies at room temperature. Several properties make it an excellent platform for many applications, from nanosensor to quantum information processing. This thesis presents the first explorations of NV-based technologies in our laboratory, investigating three sets of studies aimed at learning the know-how of this field of research and developing the necessary infrastructure to explore them in future quantum technologies. The first set of studies focus on magnetometry and how to improve NV-based magnetic sensing. We show that, using engineered ensembles of NV centers in ultrapure synthetic diamonds, one can build a relatively simple apparatus to do magnetic imaging of relatively large areas while determining the full vector field with high spatial resolution and very good sensitivity. We also show that these measurements can be used to reconstruct the current density distribution of nearby sources, opening exciting possibilities to study two-dimensional materials. Another set of studies involve spin coherence of an ensemble of NV centers. For that, we developed a method based on a CCD camera and an imaging protocol that allows implementing pulse sequences like Rabi, Ramsey and Hahn echo, performing Electron Spin Resonance (ESR) spectroscopy over extended areas. Using this method we extract parameters from our sample, including measurements for T1, T2 and T*2. The method was also used to observe Electron Spin Echo Envelope Modulation (ESEEM), due to hyperfine interaction with nearby 15N nucleus, resulting in improved frequency sensitivity. The third set of studies explore how to use femtosecond lasers to produce NV centers in diamond and investigated the nonlinear index of refraction (n2) of the diamond (type IIa) in a broad spectral region, from the infrared (1500 nm) to the ultraviolet (260 nm).
Because of their high sensitivity, quantum materials are extremely promising for new technologies. The main challenge lies in maintaining a sufficiently quantum coherence times for quantum computation or quantum sensing systems. NV centers in diamond which are point defects consisting of a substitutional nitrogen atom neighboring an atomic vacancy, where an electron pair can reside in a triplet state – are ideal candidates for the development of industrial-scale quantum systems. These spin states exhibit ms-long coherence times at room temperature and can be manipulated optically, hence opening interesting perspectives for sending magnetic fields with high sensitivity1.At HiQuTe Diamond, we take up the challenge of mastering the entire nitrogen-doped diamond production chain synthesized by Microwave Plasma-Assisted Chemical Vapor Deposition (MPACVD). We aim at creating affordable diamonds specially engineered to achieve long coherence times with high NV density and high doping uniformity. This quest require to overcome the impact of several external factors that contribute to electron spin decoherence. First, the chemical composition of the diamond, specifically the types and concentrations of impurities within the diamond matrix (such as substitutional nitrogen NS, NV centres, mono-vacancies and clusters, hydrogen, etc.), as well as their electrical charge states (NS⁰, NS⁺, NV⁰, NV⁻) should be carefully controlled. Thanks to extensive scientific research conducted over the past decade, combined with our own R&D efforts, we are now able to quantify these parameters using experimental techniques compatible with industrial applications (Raman and UV-Vis spectroscopy) and compare our results with key performance indicators2. Second, we study the relationship between coherence (T2*) and strain inhomogeneities in our diamond layers, which we analyse using birefringence measurements. Our findings demonstrate our capability to produce CVD diamond layers with reduced strain and extended defect and confirm that strain could be a critical limiting factor for T2*.In this poster, I will review the efforts carried out at HiQuTe Diamond to develop specific material that is well suited for quantum sensing applications.References1.Barry, J. F., Schloss, J. M., Bauch, E., Turner, M. J., Hart, C. A., Pham, L. M., & Walsworth, R. L. (2020). Sensitivity optimization for NV-diamond magnetometry. Reviews of Modern Physics, 92(1), 015004.2.Langer, J. (2022). Quantum-grade diamond for cavity-based solutions. Fraunhofer Verlag.