We demonstrate and analyze the use of metamaterials featuring an analogue of electromagnetically induced transparency (EIT) in slow light technology. For most metamaterials, EIT-like effects suffer from intrinsic ohmic loss, and the metamaterial-based slow-light effect can only be tuned passively, which limits their application in slow light devices. We propose a hybrid metamaterial with a unit cell composed of a ring resonator formed from photoactive silicon (Si) and a rectangular bar formed from metallic silver (Ag). Based on an analogue of EIT in the designed hybrid metamaterial, we theoretically demonstrate an all-optical tunable slow-light effect in the telecommunication window. We successfully demonstrate the possibility of designing novel all-optical tunable chip-scale slow-light devices that could be used in optical buffering.
We demonstrate and analyze the use of metamaterials featuring an analogue of electromagnetically induced transparency (EIT) in slow light technology. For most metamaterials, EIT-like effects suffer from intrinsic ohmic loss, and the metamaterial-based slow-light effect can only be tuned passively, which limits their application in slow light devices. We propose a hybrid metamaterial with a unit cell composed of a ring resonator formed from photoactive silicon (Si) and a rectangular bar formed from metallic silver (Ag). Based on an analogue of EIT in the designed hybrid metamaterial, we theoretically demonstrate an all-optical tunable slow-light effect in the telecommunication window. We successfully demonstrate the possibility of designing novel all-optical tunable chip-scale slow-light devices that could be used in optical buffering.
Metamaterials, or artificial materials with optical properties not known for natural materials, have recently been used to demonstrate unusual optical phenomena, such as negative refraction, perfect lenses, subwavelength components, and electromagnetic invisibility cloaks. Most of the metamaterials designed to date are periodic structures containing a single resonating element in each unit cell, such as a split-ring resonator (SRR), a cutwire, or a slab-wire pair [1]. In this contribution, we demonstrate that a metamaterial with two coupled SRRs can exhibit an effect reminiscent of electromagnetically induced transparency (EIT), a coherent process normally observed in three-level atomic media [2]. Due to this process, a small transparency window with low absorption appears in the spectral response of the metamaterial. Simultaneously, extremely steep normal dispersion is observed in the transparency window, which is useful for slow-light applications.
Abstract Incorporating auxiliary all‐optical modulation speeds as optional response modes into a single metamaterial is a promising research route towards advanced terahertz (THz) applications ranging from spectroscopy and sensing to communications. Particularly, a plethora of dynamically tunable optical functionalities are determined by the resonant light‐matter interactions. Here, an electromagnetically induced transparency (EIT) resonator stacked with two traditional semiconductor films, namely silicon (Si) and germanium (Ge), is experimentally demonstrated. A giant switching feature of the EIT window with a peak at 0.65 THz occurs when the Si or Ge film is excited by ultrafast optical pulses, allowing for an optically tunable group delay of the THz wave packet. The recovery time for the slow and fast on‐off‐on switching cycles is 1.7 ns and 11 ps, respectively, which are mapped as the pump delay time of Si and Ge. Two optional response modes are integrated on the same device, where the modulation speed varies by three orders of magnitude, endowing the modulator more compact. This work provides new prospects for the design and construction of novel chip‐scale THz devices based on EIT and their applications in areas of sophisticated optical buffering and active filtering.
We experimentally demonstrate for the first time an active all-optical ultrafast modulation of electromagnetically induced transparency-like effect in a hybrid device of sapphire/Si/metamaterial. From numerical simulations, it can be deducted that the tuning process is attributed to the coupling between the dark mode existing in split-ring resonators and the bright mode existing in cut wire resonators. The transmission amplitude modulation is accompanied by the slow-light effect. In addition, the ultrafast formation process is measured to be as fast as 2 ps. This work should make an important contribution to novel chip-scale photonic devices and terahertz communications.
Abstract Active control of electromagnetically induced transparency (EIT) in metamaterials promises tremendous potential applications. However, previously reported strategies most require sensitive materials as well as additional experimental apparatus, which are inconvenient for on-chip operation and restrain their implementations in fully integrated design. We propose a low-loss all-dielectric metamaterial with orthogonal double bright modes, which shows a narrowband transparency window at 950.05 nm with a high Q -factor of 2111. Just by varying the incident light polarization angle, an on-to-off in-situ EIT modulation without changing Q -factor is perfectly achieved, and the modulation depth can be up to 99.7%. Additionally, optical control of group delay with up to 36.22 ps is also demonstrated. This work provides a simple route to design chip-scale devices with optically dynamic controllability and finds fascinating applications in low-loss active slow light devices, optical switch and sensitive bio-sensing.
Abstract Electromagnetically induced transparency (EIT) stems from a quantum system, where an opaque atomic medium appears the narrow transparent state within a wide absorption area. This phenomenon can be achieved by quantum interference of pumping light and detecting light at different energy levels of transitions. In the generation process of EIT effect, in addition to transparent state, the atomic medium is usually accompanied with a strong dispersion effect, which will bright about a significant reduction of light velocity, thus realizing many important applications, such as slow light propagations. Although the EIT effect has many important applications, its application scenarios are greatly limited due to the fact that EIT realization usually requires specific and complicated conditions, such as refrigeration temperature, high intensity laser, etc. Recently, the analogue of EIT effect in metamaterial has attracted increasing attentions due to its advantages such as controllable room temperature and large operating bandwidth. Metamaterial analogue of EIT effect has become a new research focus. In this article, we review current research progresses on EIT metamaterials. Firstly, we describe the theoretical models for analyzing EIT metamaterials, including the mechanical oscillator model and the equivalent circuit model. Then, we describe the simulations, designs and experiments of passive EIT metamaterials with fixed structures and active EIT metamaterials with tunable elements. Furthermore, the applications of EIT metamaterials in the areas of slow lights, sensings, absorptions and other fields are also reviewed. Finally, the possible directions and key issues of future EIT metamaterial researches are prospected.
The electromagnetically induced transparency (EIT), which is a result of destructive interference between different excitation paths in a three-energy-level atomic medium, makes opaque probe light transparent over a range of frequencies. As this EIT effect is usually accompanied with strong dispersion, it has potential applications such as slow light propagation, optical buffering, nonlinear optics, optical sensing, etc. However, for conventional quantum EIT effect which requires stable gas lasers and low temperature environment, the implementation of EIT in chip-scale applications is severely hampered by the scathing experimental requirements. Recently, the EIT-like effect in metamaterials, which are constructed by designing the artificial subwavelength functional elements and arranging the spatial sequences, attracts tremendous attention because of its advantages, such as room temperature manipulability, large bandwidth, and small sizes. In addition, the high-quality factor(Q) value obtained by EIT-like effect has great significance in designing the metamaterial-based devices. In this paper, we design an EIT-like metamaterial with such a structure. The unit cell of the proposed metamaterial is constructed by two asymmetric silicon blocks embedded on a silicon dioxide substrate. Meanwhile, we analyze its optical properties and EIT-like effects by using three-dimension (3D) FDTD method. Based on the coupled Lorentz model, the EIT-like effect of the designed metamaterial is investigated. Then, by employing the electric field distribution on the surface of the metamaterial, and combining with the three-level atomic system, the mechanism of the EIT-like effect is analyzed in detail. We find that the EIT-like effect in the proposed metamaterial has high Q value (Q ≈ 8616) and the high transmission (T = 96%). By changing the length of the silicon block to destroy the asymmetry of the metamaterial structure, an active tuning EIT-like effect is realized. Furthermore, the metamaterial structure has the advantages of low loss, easy preparation, and active-controllability. This study represents an innovative approach to designing the EIT-like metamaterial, which is expected to be useful for designing active tunable slow-light devices and highly sensitive optical sensors.