Recently the demand for hyperpolarized noble gases is arising to improve NMR spectroscopy resolution for imaging. Hyperpolarization of noble gases is achieved by spin- exchange with alkali metal. atoms that undergo optical pumping by circularly polarized radiation. Optical pumping is usually achieved by high power semiconductor lasers. These sources have a bandwidth very large when compared with the transition bandwidth of the optically active species. This has two serious consequences: (i) the request of high power lasers, (ii) the losses that the unemployed energy delivered to the Rb vapor can provide in the efficiency of the energy transfer. Object of our investigation will be the comparison of two experimental set ups for optical pumping of Rb vapor where pumping is given in one case by a dye laser pumped by a UV nitrogen laser built in our laboratory according to the Blumlein scheme and in the other case by a semiconductor laser. Major elements that will be discussed are (1) the role of stimulated emission of Rb vapor to increase the pumping efficiency, (2) the fate of resonant photons that are emitted during Rb decays, (3) the role of applied magnetic fields in the efficiency of pumping processes.
Based on an analysis of kinetic processes in the continuous-wave (CW) single-wavelength two-photon pumped Rb-vapor laser (Rb-TPAL), a three-dimensional computational model is established using the rate equation. Based on the application of the model to cavity-enhanced Rb-TPAL [Yuanet al.,Optics Express29, 4858 (2021)], the calculated and measured dependences of the laser power on the pump power show good agreement. We simulate the Rb-TPAL pumped by a high-power CW laser diode and analyze the effects of temperature, vapor cell length, pump waist, vapor cell transmission, and output mirror reflectance on the characteristics of the blue laser. The results suggest that the output power and efficiency of blue laser can be improved by optimizing the above parameters; however, the particles in the
52D5/2level face difficulty to transition to the
62P3/2level, and this limits the further improvement of blue laser efficiency; therefore, an approach is proposed to improve the efficiency of Rb-TPAL. This study can be useful for designing a two-photon pumped alkali metal laser with high-power output.