Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Robust coherent optimal control of nitrogen-vacancy quantum bits in diamond

Andreas Angerer

Published Mar 1, 2014• 1 citation
Publisher

Abstract

During the last ten years, basic quantum operations on a single electronic spins in the nitrogen-vacancy defect center in diamond have been a rich field of study. Quantum operations coherently manipulating the spin of the nitrogen-vacancy center have become promising candidates for easy to manipulate qubits. However in order to implement these qubits in quantum computers robust high-fidelity control is needed. Building on an existing confocal microscopy setup, pulsed and quadrature-amplitude modulated microwave signals were used to realize coherent spin manipulation measurements. Especially designed Smooth Optimal Control pulses (robust against detuning and different control amplitudes) were used to develop measurement schemes resulting in the aforementioned increase of fidelity. The first part of the thesis describes the implementation of these pulses into the existing experimental setup and the calibration work necessary prior to measurements, due to imperfections of devices in the microwave chain. The second part is dedicated to the analysis of the pulses applied to a single spin by comparing the experimental results to theoretical simulations. This was done not only for one resonant spin with accurate control amplitude, but also for a range of different detunings and amplitudes. A more thorough analysis of the pulses was then achieved by using state/process tomography, resulting in a complete description of the process induced by these optimized pulses. Finally, after verifying the effect of the pulses, measurement schemes for sensing alternating magnetic fields were implemented, resulting in measurements with improved sensitivity for magnetic fields.

DOI
10.34726/hss.2013.23619

Related papers

Tailoring of measurement protocols for biomagnetic signals using quantum optimal control on NV centers in diamond

Isabell Jauch, Thomas Strohm, Tino Fuchs +1 more

Nitrogen-vacancy (NV) centers in diamond are a promising platform for ambient, high-spatial resolution magnetometry relevant to biological signals such as cardiac and muscle activity. One of the challenges is the development of pulse sequences tailored to biological signals in the near DC-range. The spatial environment of NV centers within the diamond lattice is highly complex, e.g. due to magnetic field inhomogeneities, limiting the sensors performance. To overcome these experimental constraints, quantum optimal control (QOC) aims at a precise manipulation of the systems dynamics via optimally shaped microwave pulses increasing the overall robustness of spin-based quantum sensors.

Optical and Quantum Sensing and Precision Metrology II•Mar 5, 2026•0 citations

Robust Quantum Control for the Manipulation of Solid-State Spins

Yifan Zhang, Hao Wu, Xiaodong Yang +7 more

Robust and high-fidelity control of electron spins in solids is the cornerstone for facilitating applications of solid-state spins in quantum information processing and quantum sensing. However, precise control of spin systems is always challenging due to the presence of various noises originating from the thermal environment and control fields. Here, noise-resilient quantum gates, designed with robust optimal control (ROC) algorithms, are demonstrated experimentally with nitrogen-vacancy centers in diamond to realize tailored robustness against detunings and Rabi errors simultaneously. In the presence of both 10% off-resonance detuning and 10% deviation of a Rabi frequency, we achieve an average single-qubit gate fidelity of up to 99.89%. Our experiments also show that, ROC-based multipulse quantum sensing sequences can suppress spurious responses resulting from finite widths and imperfections of microwave pulses, which provides an efficient strategy for enhancing the performance of existing multipulse quantum sensing sequences.

arXiv:2205.02434•Physical Review Applied•Mar 21, 2023•15 citations

Probing Surface Spin Interaction Dynamics using Nitrogen-Vacancy Center Quantum Sensors with High-Fidelity State-Selective Transition Control

Zimeng Wang

As a demand from developing nanotechnology and quantum information technology based on mesoscopic material, quantum sensors with better spatial resolution and sensitivity are required. \n \nHowever, few material meets the requirements of nanoscale sensors including stability and small size. Single spin of Nitrogen-Vacancy(NV) centers in diamond crystal is one kind of the ideal quantum sensors for magnetometry that has been investigated in recent years. It provides a potential way to study the dynamics in a mesoscopic system with high sensitivity at room temperature. This thesis proposes a theoretical method to realize spin interaction detection based on NV centers on an atomic force-microscopy(AFM) tip. To realize this method, a robust control on NV centers and target electron spins at zero magnetic field is necessary. A pulse control technique for NV centers is proposed to realize transitions between two degenerate states at zero magnetic field, which is an important part of the sensing method. The key to realizing this transition is a circularly polarized microwave pulse generated by two parallel wires. Combined with optimal control techniques, this pulse can achieve a gate fidelity over 99.95% theoretically.

•Nov 21, 2017•0 citations

Optical measurements of electron spin coherence of nitrogen-vacancy centers in diamond

Lucas Nunes Sales de Andrade

Among the possible defects that can occur in diamonds, one that draws attention is the nitrogen-vacancy (NV) center.Studied since the early 90s, in recent years, they became one of the most promising platforms for field applications of quantum technology at room temperature, especially for quantum sensing.They are sensitive to electric and magnetic fields, temperature, and strain, making these nanosensors a versatile platform for many applications.The NV center's spin state is easy to read and manipulate by optical means, and, most interestingly, it works well at room temperature, which facilitates its use.The great challenge to implement quantum protocols and quantum algorithms is the coherence time of the quantum states.The NV center stands out for having relatively high coherence times at room temperature.This dissertation presents measurements to characterize the electron spin coherence of NV centers in an ultrapure sample of diamond designed for quantum sensing applications.These measurements combine optical e magnetic resonance techniques.For that, a method was implemented using a conventional CCD camera and a clever imaging protocol, making it possible to perform various pulsed microwave experiments on the electron spin, such as Rabi oscillations and Hahn spin-echo, which were used for determining the characteristic relaxation times (T 1 and T 2 ).Results show that this system provides at least two readily accessible qubits that can be used in quantum protocols even at room temperature.

•Jul 16, 2021•0 citations

Quantum Engineering in Diamond

Jeson Chen

Solid-state technologies for quantum mechanical application require delicate materials that can operate stably with a long coherence time. Nitrogen vacancy (NV) centers in diamond is one of the most promising candidates for quantum physics, with applications such as single photon emitters, quantum computation, and magnetic sensor.\n\nTo fully exploit the capability of defect centers in diamond for opto-electronics and quantum engineering, a number of improvements are needed. Among these are optimization of the NV centers yield in bulk diamond, nanodiamond (ND) size reduction, photocurrent study of the defect band-trap electronic structure in diamonds, and optimization of high-speed NV qubit control. For NV centers yield optimization, both the experimental magnetic sensitivity optimization as well as theoretical simulation of NV concentration are implemented. For NDs size characterization, we analyzed the size and photon autocorrelation function of NV in NDs after air oxidation treatment using a combined atomic force microscopy/confocal system. To study defect band-trap electronic structure in diamond, excitation and quenching as well as the recovery of the quenched photocurrent was investigated to better understand photocurrent dynamics in diamond. For qubit high-speed control optimization, a microwave pulse based on a nonlinear numeric solution of the Schrodinger equation is used to rotate the NV spin faster than the ordinary Rabi flip rate. Together these approaches promise to significantly speed up the development of diamond for quantum engineering applications.

•Aug 6, 2015•0 citations

Rapid transform optimization strategy for decoherence-protected quantum register in diamond

Jiazhao Tian, Haibin Liu, Roberto Sailer +3 more

Decoherence-protected spins associated with nitrogen-vacancy color centers in diamond possess remarkably long coherence time, which makes them one of the most promising and robust quantum registers. The current demand is to explore practical rapid control strategies for preparing and manipulating such registers. Our work provides all-microwave control strategies optimized using multiple optimization methods to significantly reduce the processing time by $80%$ with a set of smooth near-zero-end-point control fields that are shown to be experimentally realizable. Furthermore, we optimize and analyze the robustness of these strategies under frequency and amplitude imperfections of the control fields, during which process we use only 16 samples to give a fair estimation of the robustness map with 2500 pixels. Overall, we provide a ready-to-implement recipe to facilitate high-performance information processing via a decoherence-protected quantum register for future quantum technology applications.

arXiv:2310.04371•Physical Review A•Feb 21, 2024•2 citations
During the last ten years, basic quantum operations on a single electronic spins in the nitrogen-vacancy defect center in diamond have been a rich field of study. Quantum operations coherently manipulating the spin of the nitrogen-vacancy center have become promising candidates for easy to manipulate qubits. However in order to implement these qubits in quantum computers robust high-fidelity control is needed. Building on an existing confocal microscopy setup, pulsed and quadrature-amplitude modulated microwave signals were used to realize coherent spin manipulation measurements. Especially designed Smooth Optimal Control pulses (robust against detuning and different control amplitudes) were used to develop measurement schemes resulting in the aforementioned increase of fidelity. The first part of the thesis describes the implementation of these pulses into the existing experimental setup and the calibration work necessary prior to measurements, due to imperfections of devices in the microwave chain. The second part is dedicated to the analysis of the pulses applied to a single spin by comparing the experimental results to theoretical simulations. This was done not only for one resonant spin with accurate control amplitude, but also for a range of different detunings and amplitudes. A more thorough analysis of the pulses was then achieved by using state/process tomography, resulting in a complete description of the process induced by these optimized pulses. Finally, after verifying the effect of the pulses, measurement schemes for sensing alternating magnetic fields were implemented, resulting in measurements with improved sensitivity for magnetic fields.
Nitrogen-vacancy (NV) centers in diamond are a promising platform for ambient, high-spatial resolution magnetometry relevant to biological signals such as cardiac and muscle activity. One of the challenges is the development of pulse sequences tailored to biological signals in the near DC-range. The spatial environment of NV centers within the diamond lattice is highly complex, e.g. due to magnetic field inhomogeneities, limiting the sensors performance. To overcome these experimental constraints, quantum optimal control (QOC) aims at a precise manipulation of the systems dynamics via optimally shaped microwave pulses increasing the overall robustness of spin-based quantum sensors.
Robust and high-fidelity control of electron spins in solids is the cornerstone for facilitating applications of solid-state spins in quantum information processing and quantum sensing. However, precise control of spin systems is always challenging due to the presence of various noises originating from the thermal environment and control fields. Here, noise-resilient quantum gates, designed with robust optimal control (ROC) algorithms, are demonstrated experimentally with nitrogen-vacancy centers in diamond to realize tailored robustness against detunings and Rabi errors simultaneously. In the presence of both 10% off-resonance detuning and 10% deviation of a Rabi frequency, we achieve an average single-qubit gate fidelity of up to 99.89%. Our experiments also show that, ROC-based multipulse quantum sensing sequences can suppress spurious responses resulting from finite widths and imperfections of microwave pulses, which provides an efficient strategy for enhancing the performance of existing multipulse quantum sensing sequences.
As a demand from developing nanotechnology and quantum information technology based on mesoscopic material, quantum sensors with better spatial resolution and sensitivity are required. \n \nHowever, few material meets the requirements of nanoscale sensors including stability and small size. Single spin of Nitrogen-Vacancy(NV) centers in diamond crystal is one kind of the ideal quantum sensors for magnetometry that has been investigated in recent years. It provides a potential way to study the dynamics in a mesoscopic system with high sensitivity at room temperature. This thesis proposes a theoretical method to realize spin interaction detection based on NV centers on an atomic force-microscopy(AFM) tip. To realize this method, a robust control on NV centers and target electron spins at zero magnetic field is necessary. A pulse control technique for NV centers is proposed to realize transitions between two degenerate states at zero magnetic field, which is an important part of the sensing method. The key to realizing this transition is a circularly polarized microwave pulse generated by two parallel wires. Combined with optimal control techniques, this pulse can achieve a gate fidelity over 99.95% theoretically.
Among the possible defects that can occur in diamonds, one that draws attention is the nitrogen-vacancy (NV) center.Studied since the early 90s, in recent years, they became one of the most promising platforms for field applications of quantum technology at room temperature, especially for quantum sensing.They are sensitive to electric and magnetic fields, temperature, and strain, making these nanosensors a versatile platform for many applications.The NV center's spin state is easy to read and manipulate by optical means, and, most interestingly, it works well at room temperature, which facilitates its use.The great challenge to implement quantum protocols and quantum algorithms is the coherence time of the quantum states.The NV center stands out for having relatively high coherence times at room temperature.This dissertation presents measurements to characterize the electron spin coherence of NV centers in an ultrapure sample of diamond designed for quantum sensing applications.These measurements combine optical e magnetic resonance techniques.For that, a method was implemented using a conventional CCD camera and a clever imaging protocol, making it possible to perform various pulsed microwave experiments on the electron spin, such as Rabi oscillations and Hahn spin-echo, which were used for determining the characteristic relaxation times (T 1 and T 2 ).Results show that this system provides at least two readily accessible qubits that can be used in quantum protocols even at room temperature.
Solid-state technologies for quantum mechanical application require delicate materials that can operate stably with a long coherence time. Nitrogen vacancy (NV) centers in diamond is one of the most promising candidates for quantum physics, with applications such as single photon emitters, quantum computation, and magnetic sensor.\n\nTo fully exploit the capability of defect centers in diamond for opto-electronics and quantum engineering, a number of improvements are needed. Among these are optimization of the NV centers yield in bulk diamond, nanodiamond (ND) size reduction, photocurrent study of the defect band-trap electronic structure in diamonds, and optimization of high-speed NV qubit control. For NV centers yield optimization, both the experimental magnetic sensitivity optimization as well as theoretical simulation of NV concentration are implemented. For NDs size characterization, we analyzed the size and photon autocorrelation function of NV in NDs after air oxidation treatment using a combined atomic force microscopy/confocal system. To study defect band-trap electronic structure in diamond, excitation and quenching as well as the recovery of the quenched photocurrent was investigated to better understand photocurrent dynamics in diamond. For qubit high-speed control optimization, a microwave pulse based on a nonlinear numeric solution of the Schrodinger equation is used to rotate the NV spin faster than the ordinary Rabi flip rate. Together these approaches promise to significantly speed up the development of diamond for quantum engineering applications.
Decoherence-protected spins associated with nitrogen-vacancy color centers in diamond possess remarkably long coherence time, which makes them one of the most promising and robust quantum registers. The current demand is to explore practical rapid control strategies for preparing and manipulating such registers. Our work provides all-microwave control strategies optimized using multiple optimization methods to significantly reduce the processing time by 8080%80 with a set of smooth near-zero-end-point control fields that are shown to be experimentally realizable. Furthermore, we optimize and analyze the robustness of these strategies under frequency and amplitude imperfections of the control fields, during which process we use only 16 samples to give a fair estimation of the robustness map with 2500 pixels. Overall, we provide a ready-to-implement recipe to facilitate high-performance information processing via a decoherence-protected quantum register for future quantum technology applications.