In this paper, we present a novel scheduling method that reduces the latency of polar decoders significantly. Unlike the prior pruning-based successive cancellation list (SCL) decoding that suffers from a number of idle cycles, the proposed overlapped SCL scheme immediately begins node operations without waiting for the list to be sorted, being exempt from such unfavorable cycles. All possible candidates for the next node operations are precomputed in parallel with the pruning operations, and are readily selected to minimize the latency. For the 5G New Radio systems, the proposed method shortens the decoding latency of the state-of-the-art approaches by up to 22% without degrading the error-correcting performance.
In this paper, we present a novel scheduling method that reduces the latency of polar decoders significantly. Unlike the prior pruning-based successive cancellation list (SCL) decoding that suffers from a number of idle cycles, the proposed overlapped SCL scheme immediately begins node operations without waiting for the list to be sorted, being exempt from such unfavorable cycles. All possible candidates for the next node operations are precomputed in parallel with the pruning operations, and are readily selected to minimize the latency. For the 5G New Radio systems, the proposed method shortens the decoding latency of the state-of-the-art approaches by up to 22% without degrading the error-correcting performance.
Due to the low-latency and high-reliability requirements of 5G, low-complexity node-based successive cancellation list (SCL) decoding has received considerable attention for use in 5G communications systems. By identifying special constituent codes in the decoding tree and immediately decoding these, node-based SCL decoding provides a significant reduction in decoding latency compared to conventional SCL decoding. However, while there exists many types of nodes, the current node-based SCL decoders are limited by the lack of a more generalized node that can efficiently decode a larger number of different constituent codes to further reduce the decoding time. In this paper, we extend a recent generalized node, the sequence repetition (SR) node, to SCL decoding, and describe the first implementation of an SR-List decoder. By merging certain SR-List decoding operations and applying various optimizations for 5G New Radio (NR) polar codes, our optimized SR-List decoding algorithm increases the throughput by almost2×compared to a similar state-of-the-art node-based SCL decoder. We also present our hardware implementation of the optimized SR-List decoding algorithm which supports all 5G NR polar codes. Synthesis results show that our SR-List decoder can achieve a2.94Gbpsthroughput and6.70Gbpsm−1m2area efficiency forL=8.
Compared with the bit-wise successive cancellation list (SCL) decoding of polar codes, the node-based Fast SCL decoding significantly reduces the decoding latency by identifying special constituent codes and decoding these in parallel. To further reduce the latency of current Fast SCL decoders, we first propose a fast sequence repetition (SR) node-based SCL (Fast SR-SCL) decoding algorithm, which only involves one type of node in the SCL decoding tree. Furthermore, we employ the adaptive path splitting (APS) strategy to terminate the path splitting in the SR node early, without degrading the error-correcting performance. Numerical results show that for 5G uplink codes with a length of 1024 and rates of 1/4, 1/2, and 3/4, our decoder can deliver the same decoding performance while reducing the average latency by 34.5%, 38.0%, and 39.6% compared with the state-of-the-art Fast SCL decoder for a list size L = 8.
Polar codes, as the first provable capacity-achieving error-correcting codes, have received much attention in recent years. However, the decoding performance of polar codes with traditional successive-cancellation (SC) algorithm cannot match that of the low-density parity-check or Turbo codes. Because SC list (SCL) decoding algorithm can significantly improve the error-correcting performance of polar codes, design of SCL decoders is important for polar codes to be deployed in practical applications. However, because the prior latency reduction approaches for SC decoders are not applicable for SCL decoders, these list decoders suffer from the long-latency bottleneck. In this paper, we propose a multibit-decision approach that can significantly reduce latency of SCL decoders. First, we present a reformulated SCL algorithm that can perform intermediate decoding of 2 b together. The proposed approach, referred as 2-bit reformulated SCL (2b-rSCL) algorithm, can reduce the latency of SCL decoder from (3n-2) to (2n-2) clock cycles without any performance loss. Then, we extend the idea of 2-b-decision to general case, and propose a general decoding scheme that can perform intermediate decoding of any 2Kbits simultaneously. This general approach, referred as 2K-bit reformulated SCL (2Kb-rSCL) algorithm, can reduce the overall decoding latency to as short as n/2K-2-2 cycles. Furthermore, on the basis of the proposed algorithms, very large-scale integration architectures for 2b-rSCL and 4b-rSCL decoders are synthesized. Compared with a prior SCL decoder, the proposed (1024, 512) 2b-rSCL and 4b-rSCL decoders can achieve 21% and 60% reduction in latency, 1.66 and 2.77 times increase in coded throughput with list size 2, and 2.11 and 3.23 times increase in coded throughput with list size 4, respectively.
Being able to provide excellent error-correction performance for polar codes with short-to-moderate code length, successive-cancellation list (SCL) is regarded as one of the most promising decoding algorithms. However, the application of SCL decoding in low-latency communication scenarios is limited due to its sequential nature. Recently, fast list decoding algorithms are proposed by considering special nodes with low code rates. Aiming at achieving further speedup for SCL decoding, this paper presents fast list decoding algorithms for two types of high-rate special nodes, namely single-parity-check (SPC) and sequence rate-1(SRI) nodes, based on the minimum-combinations set (MCS) which is able to significantly narrow the search space of candidate paths. Typically, SPC nodes can be directly decoded within one round of path splitting procedure, whereas SR1 nodes, as a group of parallel SPC nodes, can also be decode efficiently. Simulation results show that the proposed fast SCL decoder is able to reduce the decoding latency by 68.4% as compared to the state of the art, without any error-correction performance degradation.
The successive cancellation list (SCL) decoding is used to achieve good error-correcting performance for practical finite-length polar codes. However, the metric sorting that is repeatedly performed in SCL decoding increases the overall decoding latency as the list size increases, making it difficult to apply the SCL decoding to the applications with limited processing time. To reduce the latency of the metric sorting, this paper proposes a new sorting method derived by analyzing path extension cases encountered in SCL decoding. The proposed method can avoid unnecessary sorting operations by adaptively determining the sorting size, and can be combined with other metric sorting methods. Simulation results show that the proposed method significantly reduces the decoding latency for various list sizes and code rates without degrading the error-correcting performance. The proposed method also becomes more effective as the code rate or the list size increases. Combined with the state-of-the-art sorting method, the proposed method reduces the average SCL decoding latency for a (1024, 512) polar code by 33.1% when the list size is 8.
Due to the ability to provide superior error-correction performance, the successive cancellation list (SCL) algorithm is widely regarded as one of the most promising decoding algorithms for polar codes with short-to-moderate code lengths. However, the application of SCL decoding in low-latency communication scenarios is limited due to its sequential nature. To reduce the decoding latency, developing tailored fast and efficient list decoding algorithms of specific polar constituent codes (special nodes) is a promising solution. Recently, fast list decoding algorithms are proposed by considering special nodes with low code rates. Aiming to further speedup the SCL decoding, this paper presents fast list decoding algorithms for two types of high-rate special nodes, namely single-parity-check (SPC) nodes and sequence rate one or single-parity-check (SR1/SPC) nodes. In particular, we develop two classes of fast list decoding algorithms for these nodes, where the first class uses a sequential decoding procedure to yield decoding latency that is linear with the list size, and the second further parallelizes the decoding process by pre-determining the redundant candidate paths offline. Simulation results show that the proposed list decoding algorithms are able to achieve up to 70.7% lower decoding latency than state-of-the-art fast SCL decoders, while exhibiting the same error-correction performance.