In this work the creation of silicon vacancy spin defects in silicon carbide with predictable properties is demonstrated. Neutron and electron irradiation was used to create silicon vacancy ensembles and proton beam writing to create isolated vacancies at a desired position. The coherence properties of the created silicon vacancies as a function of the emitter density were investigated and a power-law function established. Sample annealing was implemented to increase the coherence properties of existing silicon vacancies. Further, spectral hole burning was used to implement absolute dc-magnetometry.
In this work the creation of silicon vacancy spin defects in silicon carbide with predictable properties is demonstrated. Neutron and electron irradiation was used to create silicon vacancy ensembles and proton beam writing to create isolated vacancies at a desired position. The coherence properties of the created silicon vacancies as a function of the emitter density were investigated and a power-law function established. Sample annealing was implemented to increase the coherence properties of existing silicon vacancies. Further, spectral hole burning was used to implement absolute dc-magnetometry.
Defects in silicon carbide have been explored as promising spin systems in quantum technologies. However, for practical quantum metrology and quantum communication, it is critical to achieve on-demand single spin-defect generation. In this work, we present the generation and characterization of shallow silicon vacancies in silicon carbide by using different implanted ions and annealing conditions. The conversion efficiency of a silicon vacancy of helium ions is shown to be higher than that by carbon and hydrogen ions in a wide implanted fluence range. Furthermore, after optimizing the annealing conditions, the conversion efficiency can be increased more than 2 times. Due to the high density of the generated ensemble defects, the sensitivity of sensing a static magnetic field can be reached as high as, which is about 9 times smaller than previous results. By carefully optimizing implanted conditions, we further show that a single silicon vacancy array can be generated with a high conversion efficiency of about 80%. The results pave the way for using an on-demand-generated single silicon vacancy for quantum information processing and quantum photonics.
This review provides an overview of defects in silicon carbide (SiC) with potential applications as quantum qubits. It begins with a brief introduction to quantum qubits and existing qubit platforms, outlining the essential criteria a defect must meet to function as a viable qubit. The focus then shifts to the most promising defects in SiC, notably the silicon vacancy (VSi) and divacancy (VC-VSi). A key challenge in utilizing these defects for quantum applications is their precise and controllable creation. Various fabrication techniques, including irradiation, ion implantation, femtosecond laser processing, and focused ion beam methods, have been explored to create these defects. Designed as a beginner-friendly resource, this review aims to support early-career experimental researchers entering the field of SiC-related quantum qubits. Providing an introduction to defect-based qubits in SiC offers valuable insights into fabrication strategies, recent progress, and the challenges that lie ahead.
We created dense ensembles of negatively charged nitrogen-vacancy (NV-) centers in diamond by neutron and electron irradiation for applications in hybrid quantum systems and magnetometry. We characterize fluorescence intensity, optical and coherence properties of the resulting defects by confocal microscopy, UV/Vis and FTIR spectroscopy, optically detected magnetic resonance and small angle X-ray scattering. We find the highest densities of NV- at neutron fluences on the order of 10^17 cm^-2 and electron doses of 10^18 cm^-2, with spin resonance linewidths of 6 MHz. Lower electron energies increase the ratio of centers in the desired negative charge state to those in the neutral one. Annealing at 900 °C during the irradiation reduces the spin resonance linewidth. Electron irradiation furthermore results in substantially higher optical transparency compared to neutron irradiation.
The identification of a microscopic configuration of point defects acting as quantum bits is a key step in the advance of quantum information processing and sensing. Among the numerous candidates, silicon-vacancy related centers in silicon carbide (SiC) have shown remarkable properties owing to their particular spin-3/2 ground and excited states. Although, these centers were observed decades ago, two competing models, the isolated negatively charged silicon vacancy and the complex of negatively charged silicon vacancy and neutral carbon vacancy [Phys. Rev. Lett. 115, 247602 (2015)], are still argued as an origin. By means of high-precision first-principles calculations and high-resolution electron spin resonance measurements, we here unambiguously identify the Si-vacancy related qubits in hexagonal SiC as isolated negatively charged silicon vacancies. Moreover, we identify the Si-vacancy qubit configurations that provide room-temperature optical readout.
We report the realization of the optically induced inverse population of the ground-state spin sublevels of the silicon vacancies (V(Si)) in silicon carbide (SiC) at room temperature. The data show that the probed silicon vacancy spin ensemble can be prepared in a coherent superposition of the spin states. Rabi nutations persist for more than 80 μs. Two opposite schemes of the optical alignment of the populations between the ground-state spin sublevels of the silicon vacancy upon illumination with unpolarized light are realized in 4H- and 6H-SiC at room temperature. These altogether make the silicon vacancy in SiC a very favorable defect for spintronics, quantum information processing, and magnetometry.
Defect based qubit systems like the nitrogen vacancy center in diamond have recently emerged as promising candidates for quantum technologies due to their combination of long coherence times, room temperature operation, and robust optical interface. In order to realize many of their proposed applications, defect qubits must be incorporated into scalable devices architectures consisting of photonic, mechanical, or electrical degrees of freedom. Despite much recent progress, many challenges remain for diamond growth and device fabrication. As an alternate approach, we engaged in a search for nitrogen vacancy center analogues in alternative materials with the hope of obtaining a greater degree of control over defect and material properties. Ultimately, we discovered that divacancy-related point defects in all three of the most common forms of silicon carbide- termed 4H, 6H, and 3C- act as analogues to the nitrogen vacancy center in diamond. We chose to focus our research primarily on defects in 3C silicon carbide (termed 'Ky5' defects) because of its availability as a single crystal heteroepitaxial thin film grown on silicon, an advantage that greatly facilitates the fabrication of functional devices. We characterized the spin and optical properties of Ky5 defects in thin film geometries and observed many similarities to the nitrogen vacancy center. We performed the first measurements of spin dynamics in 3C silicon carbide and demonstrate coherent control of defect spins up to room temperature and observe coherence times of up to 22 microseconds. To demonstrate their use in real devices, we designed, fabricated, and characterized photonic crystal cavities in 3C silicon carbide thin films with mode volumes of less than (lambda/n)^3 and Q's as high as 1,500 with integrated Ky5 defects. Additionally, we performed simulations and analysis of the fabricated structures using observed structural imperfections to determine that the Q's are likely limited primarily by the non-vertical structure sidewall angle. Despite the modest Q's of these structures, they can be utilized to generate large local field intensities to enhance optical interactions with Ky5 qubit states within the cavities. We accomplish this by performing cavity enhanced photoluminescence excitation spectroscopy on cavity modes tuned to the zero phonon line of the defects and observe large (as high as 30 times) increases in the luminescence and optically detected magnetic resonance signals originating from the defect states and approximately 2x faster rates of ground state spin initialization. In addition, we use these techniques to probe the photoluminescence dynamics of the Ky5 defects' optical pumping cycle, perform excitation wavelength dependent studies of spin and spectral inhomogeneity, and use the small mode volume and narrowband photoluminescence enhancements of the cavities to observe spectrally distinct subensembles of defects with linewidths as narrow as 25 GHz within the inhomogeneously broadened zero phonon line. Although much is still unknown regarding the properties of these defects, they show great promise as a candidate system for defect qubit based quantum devices and technologies.