A major challenge in operating multiqubit quantum processors is to mitigate multiqubit coherent errors. For superconducting circuits, besides crosstalk originating from imperfect isolation of control lines, dispersive coupling between qubits is a major source of multiqubit coherent errors. We benchmark phase errors in a controlled-phase gate due to dispersive coupling of either of the qubits involved in the gate to one or more spectator qubits. We measure the associated gate infidelity using quantum-process tomography. We point out that, due to coupling of the gate qubits to a noncomputational state during the gate, two-qubit conditional-phase errors are enhanced. Our work is important for understanding limits to the fidelity of two-qubit gates with finite on-off ratio in multiqubit settings.
Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within
25ns, with an average gate fidelity exceeding
99.99% and leakage below
10−5. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately
99.9%. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below
10−4 in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.
Abstract Because of their long coherence time and compatibility with industrial foundry processes, electron spin qubits are a promising platform for scalable quantum processors. A full-fledged quantum computer will need quantum error correction, which requires high-fidelity quantum gates. Analyzing and mitigating gate errors are useful to improve gate fidelity. Here, we demonstrate a simple yet reliable calibration procedure for a high-fidelity controlled-rotation gate in an exchange-always-on Silicon quantum processor, allowing operation above the fault-tolerance threshold of quantum error correction. We find that the fidelity of our uncalibrated controlled-rotation gate is limited by coherent errors in the form of controlled phases and present a method to measure and correct these phase errors. We then verify the improvement in our gate fidelities by randomized benchmark and gate-set tomography protocols. Finally, we use our phase correction protocol to implement a virtual, high-fidelity, controlled-phase gate.