This thesis explores the coupling of microwave cavities containing a Superconducting QUantum Interference Device (SQUID) to a mechanical resonator by means of a flux-mediated optomechanical coupling scheme, and to a Radio-Frequency (RF) circuit via a photon-pressure interaction. While flux-mediated optomechanical systems open the door for the exploration of optomechanical single-photon effects, ultimately allowing for the generation of non-classical states in mechanical oscillators and for the creation of optomechanical qubits, the realization of photon-pressure systems brings rich possibilities for quantum-limited sensing and quantum signal processing, representing a first step towards radio-frequency quantum photonics. Besides presenting the experimental work done with the systems described above, this thesis also provides a theoretical description of their working principle, details on their fabrication, and insights on maximizing their single-photon coupling strengths as well as an overview of the experimental challenges associated with SQUID cavities.
This thesis explores the coupling of microwave cavities containing a Superconducting QUantum Interference Device (SQUID) to a mechanical resonator by means of a flux-mediated optomechanical coupling scheme, and to a Radio-Frequency (RF) circuit via a photon-pressure interaction. While flux-mediated optomechanical systems open the door for the exploration of optomechanical single-photon effects, ultimately allowing for the generation of non-classical states in mechanical oscillators and for the creation of optomechanical qubits, the realization of photon-pressure systems brings rich possibilities for quantum-limited sensing and quantum signal processing, representing a first step towards radio-frequency quantum photonics. Besides presenting the experimental work done with the systems described above, this thesis also provides a theoretical description of their working principle, details on their fabrication, and insights on maximizing their single-photon coupling strengths as well as an overview of the experimental challenges associated with SQUID cavities.
The field of optomechanics has emerged as leading platform for achieving quantum control of macroscopic mechanical objects. Implementations of microwave optomechanics to date have coupled microwave photons to mechanical resonators using a moving capacitance. While simple and effective, the capacitive scheme suffers from limitations on the maximum achievable coupling strength. Here, we experimentally implement a fundamentally different approach: flux-mediated optomechanical coupling. In this scheme, mechanical displacements modulate the flux in a superconducting quantum interference device (SQUID) that forms the inductor of a microwave resonant circuit. We demonstrate that this flux-mediated coupling can be tuned in situ by the magnetic flux in the SQUID, enabling nanosecond flux tuning of the optomechanical coupling. Furthermore, we observe linear scaling of the single-photon coupling rate with the in-plane magnetic transduction field, a trend with the potential to overcome the limits of capacitive optomechanics, opening the door for a new generation of groundbreaking optomechanical experiments.
The nonlinearity is essential for creation of non-classical states of the cavity or mechanical resonator such as squeezed or cat states. A microwave cavity can be made nonlinear by, for instance, adding Josephson junctions. The mechanical resonator is inherently nonlinear. The radiation pressure interaction between cavity and mechanical resonator is also inherently nonlinear but typically under strong drive of the cavity interaction can be linearized. However, if the optomechanical system is in the strong coupling regime nonlinear quantum effects become observable. These three cases provide the motivation for our studies. We start with backaction analysis of the classical regime of a dc SQUID (superconducting quantum interference device) with an embedded mechanical resonator. Then, we perform quantum analysis to understand how the asymmetry of two Josephson junctions influences the coupling strength of optomechanical interactions such as radiation pressure, cross-Kerr and single-photon beam splitter. Using variational method and self-consistent harmonic approximation we estimate the influence of the radiation pressure coupling and Kerr nonlinearity of the cavity on the effective frequency and dissipation of the cavity. The second part of this thesis focuses on the nonlinearity of the mechanical resonator coupled to the optical/microwave cavity. We study in details the nonlinear optomechanical response and draw the response map to summarize all results of the overcoupled and undercoupled cavity for the red and blue sidebands additionally to the weak and strong drive powers. In the end, w e confirm the developed theory by using it to numerically fit the experimental results.
Harmonic oscillators might be one of the most fundamental entities described by physics. Yet they stay relevant in recent research. The topological properties associated with exceptional points that can occur when two modes interact have generated much interest in recent years. Harmonic oscillators are also at the heart of new quantum technological applications: the long lifetime of high-Q resonators make them advantageous as quantum memories, and they are employed for narrowband processing of quantum signals, as in Josephson parametric amplifiers. The goal of this thesis is to explore different fundamental regimes of two coupled harmonic oscillators using cavity optomechanics as the experimen- tal platform. With consistent progress in attaining ever increasing Q factors, mechanical and electromagnetic resonators realize near-ideal harmonic oscillators. By parametrically modulating the nonlinear optomechanical interaction between them, an effective linear coupling is achieved, which is tunable in strength and in the relative frequencies of the two modes. Thus cavity optomechanics provides a framework with excellent control over system parameters for the study of two coupled harmonic modes. The specific optomechanical implementation employed are superconducting circuits with the vibrating top plate of a capacitor as the mechanical element. Multimode optomechanical circuits are realized, with two microwave modes interacting with one or two mechanical oscillators. The supplementary modes serve either as intermediaries in the relation of the two modes of interest, or as auxiliaries used to control a parameter of the system. Three main experimental results are achieved. First, an auxiliary microwave mode allows the engineering of the effective dissipation rate of a mechanical oscillator. The latter then acts as a reservoir for the main microwave mode with which it interacts. The microwave mode susceptibility can be tuned, resulting in an instability akin to that of a maser and in resonant amplification of incoming microwave signals with an added noise close to the quantum minimum. Second, we study the conditions for a nonreciprocal interaction between two microwave modes, when the information flows in one direction but not in the other. The two modes interact through two mechanical oscillators, leading to frequency conversion between the two cavities. Dissipation in the mechanical modes is essential to the scheme in two ways: it provides a reciprocal phase necessary for the interference and eliminates the unwanted signals. Third, level attraction between a microwave and a mechanical mode is demonstrated, where the eigenfrequencies of the system are drawn closer as the result of interaction, rather distancing themselves as in the more usual case of level repulsion. The phenomenon is theoretically connected to exceptional points, and a general classification of the possible regimes of interaction between two harmonic modes is exposed, including level repulsion and attraction as special cases.
Microscale and nanoscale mechanical resonators have been used in advanced technological applications, from high precision time keeping and mass sensing, to processing high frequency signals in mobile communications. In the last few decades, they have been an important part of progress in the field of quantum information and metrology and have been proposed as quantum memories or transducers for measuring or connecting different types of quantum systems. The field of cavity optomechanics and electromechanics is concerned with coupling the electromagnetic field of a resonant optical cavity or electrical circuit to mechanical motion. These systems provide potential means to control and engineer the state of a mechanical object at the quantum level. This thesis contains the description of mechanical systems in megahertz to a few hundred megahertz frequency range formed by nano-fabricating photonic, phononic, and electrical circuits on a chip. These structures are designed to provide a large radiation pressure coupling between mechanical motion and electromagnetic fields to address and manipulate motional degrees of freedom. Qualitatively novel quantum effects are expected when one takes a step beyond linear coupling and exploits higher order interactions. To that end, we integrate electrical, mechanical and photonic structures in a multimode photonic crystal structure to observe "x2-coupling", where the optical cavity frequency is coupled to the square of the mechanical displacement. Moreover, we have developed two integrated on-chip platforms based on Si3N4 and Si nanomembranes capable of interfacing superconducting qubits and optical photons and realizing reversible microwave-to-optical conversion. We employ radiation pressure to cool these mechanical resonators to their quantum ground state. Finally, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons of frequency ωm/2π = 0.425 GHz by capacitively coupling a phononic crystal acoustic cavity to a superconducting microwave resonator. Moving to higher frequency acoustic cavities not only facilitates the integration of electromechanical circuits and nanophotonic systems capable of operation in the resolved sideband limit of optomechanics for noise-free quantum signal conversion, but it opens up the possibility of using phonons as information carriers via phononic circuits. Utilizing a two-photon resonance condition for efficient microwave pumping and phononic bandgap shield to eliminate acoustic radiation, we achieve large cooperative electromechanical coupling (C ≈ 30) and intrinsic decay time of 2.3 ms. Moreover, electrical read-out of the phonon occupancy shows that the acoustic mode thermalizes close to its quantum ground-state of motion (phonon occupancy nm=1.5) at a fridge temperature of Tf = 10 mK. We conclude by considering several designs and fabrication improvements to the hypersonic electromechanical crystals that would enable them to perform quantum conversion between the electrical and acoustic domain.
We investigate a superconducting interference device (SQUID) with two asymmetric Josephson junctions coupled to a mechanical resonator embedded in the loop of the SQUID. We quantize this system in the case when the frequency of the mechanical resonator is much lower than the cavity frequency of the SQUID and in the case when they are comparable. In the first case, the radiation pressure and the cross-Kerr type interactions arise and are modified by the asymmetry. The cross-Kerr type coupling is the leading term at the extremum points where the radiation pressure is zero. In the second case, the main interaction is the single-photon beam splitter, which exists only at a finite asymmetry. Another interaction in this regime is of cross-Kerr type, which exists at all asymmetries, but is generally much weaker than the beam splitter interaction. Increasing magnetic field can substantially enhance the optomechanical couplings strength with a potential for the radiation pressure coupling to reach the single-photon strong coupling regime, even the ultrastrong coupling regime, in which the single-photon coupling rate exceeds the mechanical frequency.
In this thesis I present different types of manipulations of microwave fields using tunable superconducting resonators. A resonator is made tunable by adding one or more superconducting quantum interference devices, SQUIDs. The SQUID consists of a superconducting loop with two Josephson junctions and acts as a tunable nonlinear inductor. Modulation of the SQUID nonlinearity can be performed to induce different types of non-trivial oscillator dynamics. The first project I present is on subharmonic oscillations. Here, the SQUID in a tunable resonator is driven with an external signal at an integer multiple of the frequency w. When w is placed slightly below the first resonator mode, I show generation of radiation at w, which is known as frequency down-conversion. In my measurements, subharmonic oscillations have been detected from period doubling up to period quintupling. For the specific case of period tripling, theory is developed and I show good agreement between theory and experiments. The second project of the thesis is on a doubly tunable resonator. Here, I show creation of a superconducting resonator with two independently tunable boundary conditions. The idea with this system is to operate the resonator in a breathing or a translational mode and compare the two. For static dc magnetic flux the performance is very good. As a second step, I perform fast modulation of both SQUIDs to generate radiation. Even though some of the measurement results are promising, I also show some contradicting observations. These indicate that the actual modulation mechanism of the SQUID is not pumping of the magnetic flux in the SQUID loop as intended, but rather direct current driving of the SQUID. However, the system remains a promising idea for microwave manipulation and creation of interesting non-classical states. As a possible application of the doubly tunable resonator, I present a theory proposal on how to use it for measurements on relativistic effects. By using the tunability of the resonator boundary conditions, the resonator can simulate a space rocket and time dilation could be measured. However, due to the crosstalk problems in the doubly tunable resonator this experiment was never realized. Finally, I finish the thesis by presenting a design for a tunable microwave coupling. Papers E and F show a high on-off ratio for the coupler and demonstrate how it can be used for storage of microwave signals. Furthermore, the tunable coupler can be used to shape a microwave signal by tuning the strength of the coupling.