Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Error correction of logical quantum bits encoded in a superconducting cavity

Michel Devoret

Published Mar 18, 2021• 0 citations
OpenAlex

Related papers

Quantum error correction with bosonic encoding

Heng Fan

Recently, the achievement, entitled “lifetime enhancement for a logic qubit by bosonic encoding error correction”, has been selected as one of “The Ten Major Advances in Chinese Science 2023”. Here, we will introduce briefly the importance of this work. It is known that quantum states are fragile due to decoherence induced by environment. Error will happen on a qubit, resulting in continuously changes of the parameters for this qubit, such as amplitude and phase parameters. The aim of quantum error correction is to amend those errors by using various quantum error correction codes, in which a logic qubit can be represented by several physical qubits. It should be noted that the quantum error correction can be realized by correcting a discrete set of errors, such as bit-flip error, phase-flip error or both of them. On the other hand, types of errors occurred depend on specific platforms of quantum computation. For example, photon loss is more inclined to occur in photonic systems. In this case, the approach of bosonic encoding of quantum error correction is more efficient. The work “lifetime enhancement for a logic qubit by bosonic encoding error correction” is for such a scenario. The challenge of quantum error correction is that operation itself is not perfect which may incur new errors. So it is actually difficult to demonstrate that we can benefit from quantum error correction. The achievement of lifetime enhancement by bosonic encoding error correction succeeds in beating this break-even point. The experiments are performed by circuit quantum electrodynamics on a superconducting processor with a qubit and a coupled resonate cavity. The logic qubit is realized by the bosonic mode of the cavity, while the superconducting qubit plays the role of the ancillary qubit in error correction. The initial states are prepared by the superconducting qubit, and are transferred to the logic qubit in the cavity. Then the error correction can be performed based on detection of photon loss by the superconducting qubit. The results show that the lifetime of the logic qubit increases from 694 μs to 805 μs with 16% enhancement. Besides high quality devices, the success of this experiment depends on the feedback control to detect and correct the error of photon loss in a short time. The result of beating the break-even point of bosonic encoding error correction is for one logic qubit. In the near future, it is hopeful to implement logic gates, such as single-qubit rotation gate and two-qubit gate, on a couple of logic qubits by bosonic encoding. The importance of the results will depend on whether higher fidelity can be achieved compared with those of gates with physical qubits. In this way, the advantage of the logic qubits for quantum computation is presented. It will be significant that the approach of bosonic encoding with a superconducting processor is scalable to hundreds of logic qubits, which may take a few years to realize. Our aim is to realize a fault-tolerant universal quantum computer based on a large quantity of high-precision logic qubits. The work “lifetime enhancement for a logic qubit by bosonic encoding error correction” is an important step toward this aim.

Chinese Science Bulletin (Chinese Version)•Jul 22, 2024•0 citations

Quantum error correction in superconducting circuits

Michel Devoret

Bulletin of the American Physical Society•Mar 16, 2016•0 citations

Demonstrating a superconducting dual-rail cavity qubit with erasure-detected logical measurements

Chou, Kevin S., Tali Shemma, Heather McCarrick +31 more

A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this using a dual-rail encoding with superconducting cavities. However, experimental characterization and demonstration of a dual-rail cavity qubit has not yet been realized. In this work, we implement such a dual-rail cavity qubit; we demonstrate a projective logical measurement with integrated erasure detection and use it to measure dual-rail qubit idling errors. We measure logical state preparation and measurement errors at the $0.01\%$-level and detect over $99\%$ of cavity decay events as erasures. We use the precision of this new measurement protocol to distinguish different types of errors in this system, finding that while decay errors occur with probability $\sim 0.2\%$ per microsecond, phase errors occur 6 times less frequently and bit flips occur at least 140 times less frequently. These findings represent the first confirmation of the expected error hierarchy necessary to concatenate dual-rail erasure qubits into a highly efficient erasure code.

arXiv:2307.03169•Jul 6, 2023•3 citations

Bosonic Error Correction with Fluxonium

Shantanu R. Jha, Shoumik D. Chowdhury, Gabriele Rolleri +22 more

Bosonic quantum error correction (QEC) offers a hardware-efficient route to fault-tolerant quantum computing. To date, however, superconducting circuit implementations of bosonic codes have utilized centimeter-scale 3D microwave cavities controlled by fixed-frequency transmon qubits, with logical lifetimes limited by transmon bit-flip errors. Here, we realize bosonic QEC in a fully planar architecture by pairing a heavy fluxonium, whose $451 \pm 70~μ\mathrm{s}$ bit-flip lifetime exceeds that of any control qubit in previous demonstrations, with an on-chip Archimedean spiral resonator several orders of magnitude smaller in mode volume than prior 3D cavities. We prepare finite-energy Gottesman-Kitaev-Preskill (GKP) states and stabilize them using measurement-free error correction with rapid fluxonium reset, extending the logical lifetime by a factor of $1.59 \pm 0.05$. These results provide the first demonstration of resonator control using a weakly coupled fluxonium and, with it, the first realization of standalone bosonic QEC in a fully planar superconducting circuit architecture.

quant-pharXiv:2609.26880•Sep 24, 2026•0 citations

Autonomous quantum error correction with superconducting qubits

Yao Lu, Eliot Kapit, Samuel Saskin +5 more

Bulletin of the American Physical Society•Mar 2, 2015•0 citations

Demonstration of Controlled-Phase Gates between Two Error-Correctable Photonic Qubits

Yuan Xu, Y. Ma, Weizhou Cai +11 more

To realize fault-tolerant quantum computing, it is necessary to store quantum information in logical qubits with error correction functions, realized by distributing a logical state among multiple physical qubits or by encoding it in the Hilbert space of a high-dimensional system. Quantum gate operations between these error-correctable logical qubits, which are essential for implementation of any practical quantum computational task, have not been experimentally demonstrated yet. Here we demonstrate a geometric method for realizing controlled-phase gates between two logical qubits encoded in photonic fields stored in cavities. The gates are realized by dispersively coupling an ancillary superconducting qubit to these cavities and driving it to make a cyclic evolution depending on the joint photonic state of the cavities, which produces a conditional geometric phase. We first realize phase gates for photonic qubits with the logical basis states encoded in two quasiorthogonal coherent states, which have important implications for continuous-variable-based quantum computation. Then we use this geometric method to implement a controlled-phase gate between two binomially encoded logical qubits, which have an error-correctable function.

arXiv:1810.04690•Physical Review Letters•Mar 24, 2020•77 citations
Recently, the achievement, entitled “lifetime enhancement for a logic qubit by bosonic encoding error correction”, has been selected as one of “The Ten Major Advances in Chinese Science 2023”. Here, we will introduce briefly the importance of this work. It is known that quantum states are fragile due to decoherence induced by environment. Error will happen on a qubit, resulting in continuously changes of the parameters for this qubit, such as amplitude and phase parameters. The aim of quantum error correction is to amend those errors by using various quantum error correction codes, in which a logic qubit can be represented by several physical qubits. It should be noted that the quantum error correction can be realized by correcting a discrete set of errors, such as bit-flip error, phase-flip error or both of them. On the other hand, types of errors occurred depend on specific platforms of quantum computation. For example, photon loss is more inclined to occur in photonic systems. In this case, the approach of bosonic encoding of quantum error correction is more efficient. The work “lifetime enhancement for a logic qubit by bosonic encoding error correction” is for such a scenario. The challenge of quantum error correction is that operation itself is not perfect which may incur new errors. So it is actually difficult to demonstrate that we can benefit from quantum error correction. The achievement of lifetime enhancement by bosonic encoding error correction succeeds in beating this break-even point. The experiments are performed by circuit quantum electrodynamics on a superconducting processor with a qubit and a coupled resonate cavity. The logic qubit is realized by the bosonic mode of the cavity, while the superconducting qubit plays the role of the ancillary qubit in error correction. The initial states are prepared by the superconducting qubit, and are transferred to the logic qubit in the cavity. Then the error correction can be performed based on detection of photon loss by the superconducting qubit. The results show that the lifetime of the logic qubit increases from 694 μs to 805 μs with 16% enhancement. Besides high quality devices, the success of this experiment depends on the feedback control to detect and correct the error of photon loss in a short time. The result of beating the break-even point of bosonic encoding error correction is for one logic qubit. In the near future, it is hopeful to implement logic gates, such as single-qubit rotation gate and two-qubit gate, on a couple of logic qubits by bosonic encoding. The importance of the results will depend on whether higher fidelity can be achieved compared with those of gates with physical qubits. In this way, the advantage of the logic qubits for quantum computation is presented. It will be significant that the approach of bosonic encoding with a superconducting processor is scalable to hundreds of logic qubits, which may take a few years to realize. Our aim is to realize a fault-tolerant universal quantum computer based on a large quantity of high-precision logic qubits. The work “lifetime enhancement for a logic qubit by bosonic encoding error correction” is an important step toward this aim.
A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this using a dual-rail encoding with superconducting cavities. However, experimental characterization and demonstration of a dual-rail cavity qubit has not yet been realized. In this work, we implement such a dual-rail cavity qubit; we demonstrate a projective logical measurement with integrated erasure detection and use it to measure dual-rail qubit idling errors. We measure logical state preparation and measurement errors at the 0.01%0.01\%0.01%-level and detect over 99%99\%99% of cavity decay events as erasures. We use the precision of this new measurement protocol to distinguish different types of errors in this system, finding that while decay errors occur with probability ∼0.2%\sim 0.2\%∼0.2% per microsecond, phase errors occur 6 times less frequently and bit flips occur at least 140 times less frequently. These findings represent the first confirmation of the expected error hierarchy necessary to concatenate dual-rail erasure qubits into a highly efficient erasure code.
Bosonic quantum error correction (QEC) offers a hardware-efficient route to fault-tolerant quantum computing. To date, however, superconducting circuit implementations of bosonic codes have utilized centimeter-scale 3D microwave cavities controlled by fixed-frequency transmon qubits, with logical lifetimes limited by transmon bit-flip errors. Here, we realize bosonic QEC in a fully planar architecture by pairing a heavy fluxonium, whose 451±70 μs451 \pm 70~μ\mathrm{s}451±70 μs bit-flip lifetime exceeds that of any control qubit in previous demonstrations, with an on-chip Archimedean spiral resonator several orders of magnitude smaller in mode volume than prior 3D cavities. We prepare finite-energy Gottesman-Kitaev-Preskill (GKP) states and stabilize them using measurement-free error correction with rapid fluxonium reset, extending the logical lifetime by a factor of 1.59±0.051.59 \pm 0.051.59±0.05. These results provide the first demonstration of resonator control using a weakly coupled fluxonium and, with it, the first realization of standalone bosonic QEC in a fully planar superconducting circuit architecture.
To realize fault-tolerant quantum computing, it is necessary to store quantum information in logical qubits with error correction functions, realized by distributing a logical state among multiple physical qubits or by encoding it in the Hilbert space of a high-dimensional system. Quantum gate operations between these error-correctable logical qubits, which are essential for implementation of any practical quantum computational task, have not been experimentally demonstrated yet. Here we demonstrate a geometric method for realizing controlled-phase gates between two logical qubits encoded in photonic fields stored in cavities. The gates are realized by dispersively coupling an ancillary superconducting qubit to these cavities and driving it to make a cyclic evolution depending on the joint photonic state of the cavities, which produces a conditional geometric phase. We first realize phase gates for photonic qubits with the logical basis states encoded in two quasiorthogonal coherent states, which have important implications for continuous-variable-based quantum computation. Then we use this geometric method to implement a controlled-phase gate between two binomially encoded logical qubits, which have an error-correctable function.