Charge-Assisted Engineering The recently developed method of charge-assisted single defect engineering brings the full scalability of solid-state qubits or quantum sensors closer. Applied to colour centres in diamond (NV, SnV, MgV,…), it enables a strong enhancement of their creation yield and of their properties such as charge-state stability or spin coherence times. More details can be found in article number 2000614 by Sébastien Pezzagna and co-workers.
Charge-Assisted Engineering The recently developed method of charge-assisted single defect engineering brings the full scalability of solid-state qubits or quantum sensors closer. Applied to colour centres in diamond (NV, SnV, MgV,…), it enables a strong enhancement of their creation yield and of their properties such as charge-state stability or spin coherence times. More details can be found in article number 2000614 by Sébastien Pezzagna and co-workers.
Abstract Qubits based on colour centres in diamond became a prominent system for solid-state quantum information processing and sensing. But the deterministic creation of qubits and the control of their environment are still critical issues, preventing the development of a room-temperature quantum computer. We report on the high creation yield of NV centres of 75% (a tenfold enhancement) by charge-assisted defect engineering, together with an improvement of their spin coherence. The method strongly favours the formation and negative charge state of the NV centres with respect to intrinsic diamond, while it hinders the formation of competing and perturbing defects such as di-vacancies or NVH complexes. We evidence spectrally the charge state tuning of the implantation-induced vacancies from V0 to V−, key element of this Coulomb-driven engineering. The generality of the method is demonstrated using several donors (phosphorous, oxygen and sulphur) and applying it to other centres (SnV and MgV) in diamond.
Owing to its unique optical and spin properties, the nitrogen‐vacancy (NV) center holds the promise of a diamond‐based room‐temperature scalable quantum computer, but the numerous technical and physical issues are not yet overcome, especially the poor N to NV conversion. The NV and other color centers are, however, successfully used as multitasking quantum sensors, and open new routes in quantum sensing technologies. Most recently, several breakthroughs and demonstrations were achieved, shedding a new light on the feasibility of a NV‐based quantum computer. Herein, the recently developed method of charge‐assisted single defect engineering is reviewed. With a controlled charging of the involved species, it modifies the diffusion or kinetics of defect formation and acts as a catalyzer of the NV creation while hindering the formation of competing and perturbing defects such as divacancies or NVH. Very high NV creation yields up to 75% are obtained and the method is suitable to other impurity‐vacancy defects. Furthermore, it has positive consequences on the charge state stability and coherence time of the NV centers, which is as well discussed. Together with the possibility to nowadays deterministically implant single ions, this powerful method brings the scalability of NV qubits closer.
Solid-state color-center spin defects provide a versatile platform for quantum sensing with applications ranging from nanoscale magnetometry to thermometry and electrometry. This review surveys recent progress in nitrogen-vacancy centers in diamond and defect spins in silicon carbide (SiC), with emphasis on their material properties, fabrication strategies, and coherence engineering. Key defect creation and optimization techniques, including ion implantation, femtosecond laser writing, focused ion beam nanofabrication, isotopic engineering, and surface passivation, are discussed in the context of improving spin coherence and optical performance. Fundamental quantum measurement protocols, optically detected magnetic resonance, Rabi oscillations, Ramsey interferometry, and spin echo, are reviewed as a hierarchical framework for characterizing spin control, dephasing, and intrinsic coherence. The review further highlights microscale sensing architectures and examines the growing role of machine learning in pulse optimization, adaptive estimation, and data-driven imaging. Finally, current challenges and future directions are outlined, focusing on scalability, environmental robustness, and autonomous operation. Together, these developments position diamond and SiC color centers as leading platforms for next-generation solid-state quantum sensors.
When the word diamond comes up, the majority of people thinks about engagement rings or gemstones. In fact, it is additionally, one of the most promising host materials for the implementation of advanced technology, exploiting the nature of quantum physics. Such quantum technologies have disruptive potential, ones the quantum effects can be applied in macroscopic, commercial products. The nitrogen-vacancy (NV) centre in diamond is a promising candidate to perform such tasks in the fields of quantum computation, quantum cryptography or metrology. Especially in the field of quantum sensing, the NV sensor impresses with nano-scale spatial resolution paired with high sensitivity. The electronic spin of the atomic-sized point defect can be initialised, manipulated and read-out at ambient conditions and coherence lifetimes are comparably long. Diamond magnetometers based on negatively charged NV centres have shown to be very attractive, and the sensitivity goes down to the single-atom level. In order to exploit such a high sensitivity level for sensing prospects, in this thesis, the NV centres are fabricated well confined in a certain distance to the diamond surface, since the detectable field usually decays with the third power of the distance between sensor and target. The surface depicts a fracture of the spin wise protecting diamond lattice and charge fluctuations affect the stability of NV centres, which are overcome by diamond surface termination. In order to improve the sensitivity further, the sensor density, measurement contrast and interaction time are increased. The nitrogen doping technique, which is applied during a plasma-enhanced chemical vapour deposition (PECVD) diamond growth process is used to fabricate NV centre ensembles aligned along one diamond crystal axis, thereby improving the measurement contrast by a factor up to four. The interaction time limiting spin bath is analysed using the sensor capabilities of the NVs, which leads to enhanced growth strategies and the fabrication of sensitivity optimised NV centre ensembles for magnetometry applications.
The Nitrogen-Vacancy (NV) color center is a defect of diamond which behaves as an artificial atom hosted in a solid-state matrix. Due to its electron spin properties which can be read-out and manipulated as an elementary quantum system, the NV center has found a wide panel of applications as a qubit for quantum information and as a magnetic field sensor. However these applications require to control the properties of the NV centers and their localization. This doctoral thesis investigates methods allowing us to tailor the properties of NV centers by combining techniques for the implantation of nitrogen atoms and the plasma-assisted (CVD) synthesis of diamond.The manuscript is divided into six chapters. The first chapter summarizes the properties of the NV center which will set our objectives for the NV engineering. The second chapter will describe how arrays of NV centers can be created using Focused Ion Beam implantation. The results open a wide range of applications for the targeted creation of NV centers in diamond structures such as photonic crystals and tips. However the low kinetic energy which is required for achieving implantation within a spot of 10-nm diameter leads to shallow defects which properties are strongly affected by the sample surface. The third chapter investigates how the overgrowth of a diamond layer over implanted NV centers can remove the detrimental influence of the surface. The fourth and fifth chapters describe effective methods for NV center fabrication through the control of the CVD growth conditions of the hosting crystal. Thin layers with high NV doping can be grown and almost perfect control of the orientation of the NV axis can be achieved. With the goal to optimize the spin coherence properties, the sixth chapter investigates how the electron spin of the NV center can be protected from decoherence effects induced by magnetic noise due to the unpolarized spins in the diamond lattice.