During the past decades, the exploration of new topological material and the study of their novel physical properties have become a hot topic in condensed matter physics. However, it is hard to realize various topological materials and observe their physical properties that have been predicted theoretically due to the limitation of experimental techniques, such as fabrication, parameter control, and measurement. This situation makes quantum simulation a way alternative to simulating large quantum systems. In general, quantum simulation can be implemented by some controllable quantum systems. As a kind of all-solid state device, superconducting quantum circuit is an artificial quantum system that has great advantage in scalability, integration, and controllability, which provides an important scheme to realize the quantum simulator. In this paper, we review our recent results of quantum simulation in the space-time inversion symmetry protected topological semimetal bands, Hopf-link semimetal bands, and topological Maxwell metal bands with superconducting quantum circuits. These results show that the superconducting circuit is a promising system for simulating the quantum many-body system in condensed matter physics.
During the past decades, the exploration of new topological material and the study of their novel physical properties have become a hot topic in condensed matter physics. However, it is hard to realize various topological materials and observe their physical properties that have been predicted theoretically due to the limitation of experimental techniques, such as fabrication, parameter control, and measurement. This situation makes quantum simulation a way alternative to simulating large quantum systems. In general, quantum simulation can be implemented by some controllable quantum systems. As a kind of all-solid state device, superconducting quantum circuit is an artificial quantum system that has great advantage in scalability, integration, and controllability, which provides an important scheme to realize the quantum simulator. In this paper, we review our recent results of quantum simulation in the space-time inversion symmetry protected topological semimetal bands, Hopf-link semimetal bands, and topological Maxwell metal bands with superconducting quantum circuits. These results show that the superconducting circuit is a promising system for simulating the quantum many-body system in condensed matter physics.
Abstract Topological phases of matter are an exotic phenomenon in modern condensed matter physics, which has attracted much attention due to the unique boundary states and transport properties. Recently, this topological concept in electronic materials has been exploited in many other fields of physics. Motivated by designing and controlling the behavior of electromagnetic waves in optical, microwave, and sound frequencies, topological photonics emerges as a rapid growing research field. Due to the flexibility and diversity of superconducting quantum circuits system, it is a promising platform to realize exotic topological phases of matter and to probe and explore topologically‐protected effects in new ways. Here, theoretical and experimental advances of topological photonics on superconducting quantum circuits—via the experimentally demonstrated parametric tunable coupling techniques, including using of the superconducting transmission line resonator, superconducting qubits, and their coupled system—are reviewed. On superconducting circuits, the flexible interactions and intrinsic nonlinearity make topological photonics in this system not only a simple photonic analog of topological effects for novel devices, but also a realm of exotic but less‐explored fundamental physics.
We simulated highly tunable Weyl-semimetal bands using superconducting quantum circuits. Driving the superconducting quantum circuits with microwave fields, we mapped the momentum space of a lattice to the parameter space, realizing the Hamiltonian of a Weyl semimetal. By measuring the energy spectrum, we directly imaged the Weyl points, whose topological winding numbers were further determined from the Berry curvature measurement. In addition, we manipulated the band structure with an additional pump microwave field, producing a momentum-dependent Weyl-point energy together with an artificial magnetic field, which are indispensable for generating chiral magnetic topological currents in some special Weyl semimetals and may have significant impact on topological physics.
Topological states of quantum matter have inspired both fascinating physics findings and exciting opportunities for applications. Due to the over-complicated structure of, as well as interactions between, real materials, a faithful quantum simulation of topological matter is very important in deepening our understanding of these states. This requirement puts the quantum superconducting circuits system as a good option for mimicking topological materials, owing to their flexible tunability and fine controllability. As a typical example herein, we realize a Z2-type topological insulator featuring the quantum spin Hall effect state, using a coupled system of transmission-line resonators and transmons. The single-excitation eigenstates of each unit cell are used as a pseudo-spin 1/2 system. The boundary of the topological phase transition is fixed in the phase diagram. Topological edge states are shown, which can be experimentally verified by detecting the population at the boundary of the plane. Compared to the previous simulations, this compositional system is fairly controllable, stable and less limited. Therefore, our scheme provides a reliable platform for faithful quantum simulations of topological matter.
Superconducting quantum circuits (SQCs), composed of superconducting capacitors, inductances, Josephson junctions, and transmission lines, exhibit macroscopic quantum effects at ultra-low temperatures. Due to the extremely low dissipation of superconductors, an important application of SQCs is superconducting qubits with long coherence time. Quantum computing based on superconducting qubits is a leading physical realization method of quantum computing, which is theoretically capable of accelerating many computational problems including quantum simulation, database searching, and optimization. In the long run, to use the power of quantum computing to its full extent, universal quantum computers should be constructed with quantum error correction. In the short term, one of the most pressing targets of the superconducting quantum computing community is to demonstrate quantum advantage using noisy intermediate-scale quantum chips. Both goals rely on the increasing of the number of coupled qubits in a quantum circuit and the quality of these qubits, which dictate the breadth and the depth of a problem it can solve, respectively. The fabrication of SQCs has adopted a few manufacturing processes from conventional integrated circuits. Quantum chips containing multiple superconducting qubits can be made and packaged on a large scale. “Quantum supremacy” has been demonstrated on a quantum chip with fifty-three qubits fabricated using the flip-chip bonding technology. However, to demonstrate quantum advantage, the quality and quantity of qubits need to increase simultaneously. Dissipative channels emerge in circuit design, material preparation, chip fabrication, and working environment, limiting the lifetime of superconducting qubits. For quantum chips with tens to hundreds of qubits, the integration will also introduce extra processing steps which may degrade the qubits, and unwanted coupling to loss channels. Most of these channels are microscopically related to materials constructing the quantum chips, chip surfaces, and material interfaces. Thus, it is important to investigate the material growth and device fabrication of SQCs, and to understand the material related loss mechanisms. This review paper investigates the material related topics in superconducting quantum circuits pertinent to the quantum computing application from a comprehensive perspective. The history of SQCs is briefly mentioned, followed by the peculiar characteristics as an engineerable quantum system, and a roadmap to quantum advantage and universal quantum computing in the next a few years. Technically, the superconducting quantum computer is compared to a Schrodinger’s cat, and can be boiled down into three parts, i.e., quantum chips, the environment, and the operating system, corresponding to the cat, the box, and the observer, respectively. The material related decoherence channels of the SQCs can be sorted into four categories; each will be discussed in details. To fabricate SQCs with minimal loss, the processing technologies are elaborated, including qubit design, material selection, surface treatments, film growth, and Josephson junction, etc. Though there are general guidelines that amorphous materials should be avoided and processing induced damage should be minimized, more is to be investigated due to the emerging of new materials and new fabrication methods. The last part presents the potential application of the superconducting quantum computer and its current state of play. SQC for quantum computing is a multi-discipline research topic, demanding joint efforts from different scientific and technical areas. Materials science and device processing will play important roles along the way to quantum practicality.
This is an introductory review of the physics of topological quantum matter with cold atoms. Topological quantum phases, originally discovered and investigated in condensed matter physics, have recently been explored in a range of different systems, which produced both fascinating physics findings and exciting opportunities for applications. Among the physical systems that have been considered to realize and probe these intriguing phases, ultracold atoms become promising platforms due to their high flexibility and controllability. Quantum simulation of topological phases with cold atomic gases is a rapidly evolving field, and recent theoretical and experimental developments reveal that some toy models originally proposed in condensed matter physics have been realized with this artificial quantum system. The purpose of this article is to introduce these developments. The article begins with a tutorial review of topological invariants and the methods to control parameters in the Hamiltonians of neutral atoms. Next, topological quantum phases in optical lattices are introduced in some detail, especially several celebrated models, such as the Su–Schrieffer–Heeger model, the Hofstadter–Harper model, the Haldane model and the Kane–Mele model. The theoretical proposals and experimental implementations of these models are discussed. Notably, many of these models cannot be directly realized in conventional solid-state experiments. The newly developed methods for probing the intrinsic properties of the topological phases in cold-atom systems are also reviewed. Finally, some topological phases with cold atoms in the continuum and in the presence of interactions are discussed, and an outlook on future work is given.
The detection of topological phases of matter has become a central issue in recent years. Conventionally, the realization of a specific topological phase in condensed matter physics relies on probing the underlying surface band dispersion or quantum transport signature of a real material, which may be imperfect or even absent. On the other hand, quantum simulation offers an alternative approach to directly measure the topological invariant on a universal quantum computer. However, experimentally demonstrating high-dimensional topological phases remains a challenge due to the technical limitations of current experimental platforms. Here, we investigate the three-dimensional topological insulators in the AIII (chiral unitary) symmetry class, which yet lack experimental realization. Using the nuclear magnetic resonance system, we experimentally demonstrate their topological properties, where a dynamical quenching approach is adopted and the dynamical bulk-boundary correspondence in the momentum space is observed. As a result, the topological invariants are measured with high precision on the band-inversion surface, exhibiting robustness to the decoherence effect. Our Letter paves the way toward the quantum simulation of topological phases of matter in higher dimensions and more complex systems through controllable quantum phases transitions.