Acta Physica Sinica

Signal-to-noise ratio of spin noise spectroscopy in rubidium vapor

Shi Ping, Jian Ma, Xuan Qian, Jie Yang, Li Wei

Published Jan 1, 2017• 5 citations

Abstract

Spin noise spectroscopy is a non-demolition technique to detect the spin dynamics, and it is a good way to realize spin property under thermal equilibrium. Since spin noise arises from spin fluctuation at thermal equilibrium, it is a weak signal, therefore, various methods are used to enhance the signal-to-noise ratio(SNR) of the measurement system. To study the influence from different factors on the quality of spin noise spectroscopy, we report spin noise spectroscopy measurements in Rubidium vapor with three methods: a commercial frequency analyzer, a data acquisition card(DAC) with fast Fourier transform(FFT) done by a computer, and a DAC with real-time FFT based on FPGA(field-programmable gate array), respectively. According to the experimental results, we discuss several parameters and their influences on the SNR of the spectrum, including spectrum accumulation time, measurement efficiency and acquisition resolution. We find that the accumulation time is the most important factor for achieving high-quality spectrum. Measurement efficiency indicates how a good quality of the spin noise spectroscopy can be achieved in a finite time period, and we make a comparison of measurement efficiency among three methods. However, improvement of acquisition resolution does not make much more contribution to the quality of spin noise spectroscopy. Taken all into account, the DAC with real-time FFT performs best due to its bigger data utilization ratio, higher measurement efficiency and the multiplex advantage, thus it is more helpful for spin noise spectroscopy measurement in the study of spin dynamics.

DOI: 10.7498/aps.66.017201

Related papers

Measurement and improvement of rubidium spin noise spectroscopy

Yaxuan Shang, Jian Ma, Shi Ping +3 more

Spin noise spectroscopy (SNS) is a new kind of Faraday rotation technique, which does not need spin injection to generate polarized spin. This method uses a linearly polarized laser to detect the spontaneous spin fluctuation in a thermal equilibrium state. However, the signal of spontaneous spin fluctuation is so weak (~V) in the thermal equilibrium system that a big signal-noise ratio (SNR) is often demanded. Here, we report on the build-up and improvement of a spin noise spectrum measurement system. A home-made field-programmable gate array (FPGA) based data-acquisition card with real-time fast Fourier transform (DAC-FFT) is used to improve the SNR of the SNS measurement system. The reduction of intrinsic noise in the experimental system is discussed in detail. Both the dependence of background noise and the dependence of spin noise on the intensity of probe laser are analyzed. We find that the background noise is proportional to the intensity of the probe laser, while the spin noise signal shows square dependence on probe laser intensity. The spin noise indeed comes from the spontaneous spin fluctuation as experimentally confirmed via an acousto-optic modulator (AOM) inserted in the measurement system. The measurement performances of two FPGA based DAC-FFTs (the 8-bit FFTsDAC1 and the 12-bit FFTsDAC2, respectively) are compared. Several factors are found to affect the SNR of the system, including the measurement efficiency and the acquisition resolution. The FFTsDAC2 has longer single acquisition time and faster data transmission speed (with USB 3.0) than the FFTsDAC1, when the total measurement time is set to be the same, the effective measurement time realized in FFTsDAC2 is longer than in FFTsDAC1. With better measurement efficiency and sampling depth and longer single acquisition time, the FFTsDAC2 has a better SNR and finer frequency resolution with a much narrower full width at half maximum (FWHM) value. Moreover, the simulations of the measurement process show the effect of the single acquisition time on the FWHM of spin noise peak, further clarifying the reason why the spin noise spectrum measured by FFTsDAC2 is more accurate.

Acta Physica SinicaJan 1, 20182 citations

Measurements of spin properties of atomic systems in and out of equilibrium via noise spectroscopy

Maheswar Swar, Dibyendu Roy, D Dhanalakshmi +3 more

We explore the applications of spin noise spectroscopy (SNS) for detection of the spin properties of atomic ensembles in and out of equilibrium. In SNS, a linearly polarized far-detuned probe beam on passing through an ensemble of atomic spins acquires the information of the spin correlations of the system which is extracted using its time-resolved Faraday-rotation noise. We measure various atomic, magnetic and sub-atomic properties as well as perform precision magnetometry using SNS in rubidium atomic vapor in thermal equilibrium. Thereafter, we manipulate the relative spin populations between different ground state hyperfine levels of rubidium by controlled optical pumping which drives the system out of equilibrium. We then apply SNS to probe such spin imbalance non-perturbatively. We further use this driven atomic vapor to demonstrate that SNS can have better resolution than typical absorption spectroscopy in detecting spectral lines in the presence of various spectral broadening mechanisms.

arXiv:1809.02321Optics ExpressNov 21, 201822 citations

Measurements of Temporal Fluctuations of Magnetization in Alkali Vapor and Applications

Maheswar Swar, Dibyendu Roy, Dhamodaran Dhanalakshmi +3 more

We describe a relatively non-invasive optical spectroscopy technique, known as spin noise spectroscopy (SNS), to probe spontaneous magnetization fluctuations in an alkali atomic vapor at thermal equilibrium. The atomic magnetization at a non-zero temperature fluctuates about its equilibrium value, and such magnetization (spin) noise imparts fluctuation in the measured Faraday rotation of a far-detuned, linearly polarized probe laser beam passing through the vapor. This Faraday rotation fluctuation reveals the intrinsic spin dynamics of the electrons in the alkali vapor. We present a systematic experimental study of the SNS realized in thermal rubidium vapor and illustrate how one can measure various magnetic and chemical properties of the sample with minimal perturbation. We also demonstrate the applicability of this spectroscopy technique in measuring the spin populations and their dynamics in different hyperfine and magnetic levels by optically pumping the atomic system.

River Publishers eBooksSep 1, 20222 citations

Comparison and analysis of methods for measuring the spin transverse relaxation time of rubidium atomic vapor

Lulu Zhang, Yongbiao Yang, Junye Zhao +2 more

The spin transverse relaxation time ( T 2 ) of atoms is an important indicator for magnetic field precision measurement. Especially in optically-pumped atomic magnetometer, the linewidth of the magnetic resonance signal is one of the most important parameters of sensitivity, which is inversely correlated with T 2 of atoms. In this paper, we propose four methods, namely spin noise spectroscopy signal fitting, radio-frequency free induction decay (RF-FID) signal fitting, ω m (modulation frequency)-broadening fitting, and magnetic resonance broadening fitting, for in-situ measurement T 2 of atomic vapor cells based on light-atom interactions. Meanwhile, T 2 of three Rubidium (Rb) atomic vapor cells with different parameters are measured and discussed by using these four methods. A comparative analysis visualizes the characteristics of the different methods and the effects of buffer gas on T 2 of Rb atoms. Through theoretical and experimental analysis, we assess the applicability of each method and concluded that the RF-FID signal fitting method provides the most accurate measurements due to the timing sequence control system, which results in a cleaner measurement environment. Furthermore, we demonstrate and qualitatively analyze the relationship between temperature and T 2 of Rb atoms. This work may offer valuable insights into the selection of atomic vapor cells and it is also applicable for the spin-exchange relaxation-free region.

arXiv:2312.06078Optics ExpressNov 17, 20240 citations

Enhancement of spin noise spectroscopy of rubidium atomic ensemble by using the polarization squeezed light

Lele Bai, Lulu Zhang, Yongbiao Yang +5 more

We measured the spin noise spectroscopy (SNS) of rubidium atomic ensemble with two different kinds of atomic vapor cells (filled with buffer gas or coated with paraffin film on the inner wall) and demonstrated the enhancement of the signal-to-noise ratio (SNR) by using polarization squeezed state (PSS) of 795-nm light field with Stokes operator S Λ 2 squeezed. The PSS is prepared by locking the relative phase between the squeezed vacuum state of light obtained with a sub-threshold optical parametric oscillator and the orthogonally polarized local oscillator beam by means of the quantum noise lock. Under the same conditions, the PSS can be employed not only to improve the SNR, but also to keep the full width at half maximum (FWHM) of SNS, compared with the case of using the polarization coherent state (PCS), enhancement of SNR is positively correlated with the squeezing level of the PSS. With increasing probe laser power and atomic number density, the SNR and FWHM of SNS will increase correspondingly. With the help of the PSS of the Stokes operator S Λ 2 , quantum improvements of both the SNR and FWHM of SNS signal has been demonstrated by controlling optical power of polarization squeezed light beam or atomic number density in our experiments.

arXiv:2111.09572Optics ExpressDec 24, 202112 citations

Quantum noise spectroscopy of non-monotonous spectra

Yoav Romach, Andrii Lazariev, Itay Avrahami +3 more

Understanding the physical origin of noise affecting quantum systems is important for nearly every quantum application. While quantum noise spectroscopy has been employed in various quantum systems, such as superconducting qubits and trapped ions, traditional spectroscopy methods are usually efficient in measuring noise spectra with mostly monotonically decaying contributions. However, there are important scenarios in which the noise spectrum is broadband and non-monotonous, thus posing a challenge to existing noise spectroscopy schemes.Here, we compared several methods for noise spectroscopy: spectral decomposition based on the CPMG sequence, the recently presented DYSCO sequence and a modified DYSCO sequence with a Gaussian envelope (gDYSCO).The performance of the sequences is quantified by analytic and numeric determination of the frequency resolution, bandwidth and sensitivity, revealing a supremacy of gDYSCO to reconstruct non-trivial features.Utilizing an ensemble of nitrogen-vacancy centres in diamond coupled to a high density 13C nuclear spin environment, we experimentally confirm our findings.The combination of the presented schemes offers potential to record high quality noise spectra as a prerequisite to generate quantum systems unlimited by their spin-bath environment.

Mar 20, 20181 citation