Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Origins of Diamond Surface Noise Probed by Correlating Single-Spin Measurements with Surface Spectroscopy

Sorawis Sangtawesin, Bo Dwyer, Srikanth J. Srinivasan, James J. Allred, Lila V. H. Rodgers, Kristiaan De Greve, Alastair D. Stacey, Nikolai Dontschuk, Kane Michael O'Donnell, Di Hu, D. A. Evans, Cherno Jaye, Daniel A. Fischer, Matthew Markham, Daniel J. Twitchen, Hongkun Park, Mikhail D. Lukin, Nathalie P. de Leon

Published Nov 2, 2024• 210 citations
OpenAlex

Abstract

The nitrogen-vacancy (NV) center in diamond exhibits spin-dependent fluorescence and long spin coherence times under ambient conditions, enabling applications in quantum information processing and sensing. NV centers near the surface can have strong interactions with external materials and spins, enabling new forms of nanoscale spectroscopy. However, NV spin coherence degrades within 100 nm of the surface, suggesting that diamond surfaces are plagued with ubiquitous defects. Prior work on characterizing near-surface noise has primarily relied on using NV centers themselves as probes; while this has the advantage of exquisite sensitivity, it provides only indirect information about the origin of the noise. Here we demonstrate that surface spectroscopy methods and single-spin measurements can be used as complementary diagnostics to understand sources of noise. We find that surface morphology is crucial for realizing reproducible chemical termination, and use this insight to achieve a highly ordered, oxygen-terminated surface with suppressed noise. We observe NV centers within 10 nm of the surface with coherence times extended by an order of magnitude.

Related papers

Origins of Diamond Surface Noise Probed by Correlating Single-Spin Measurements with Surface Spectroscopy

Sorawis Sangtawesin, Bo L. Dwyer, Srikanth Srinivasan +15 more

The nitrogen-vacancy (NV) center in diamond exhibits spin-dependent fluorescence and long spin coherence times under ambient conditions, enabling applications in quantum information processing and sensing.NV centers near the surface can have strong interactions with external materials and spins, enabling new forms of nanoscale spectroscopy.However, NV spin coherence degrades within 100 nm of the surface, suggesting that diamond surfaces are plagued with ubiquitous defects.Prior work on characterizing near-surface noise has primarily relied on using NV centers themselves as probes; while this has the advantage of exquisite sensitivity, it provides only indirect information about the origin of the noise.Here we demonstrate that surface spectroscopy methods and single-spin measurements can be used as complementary diagnostics to understand sources of noise.We find that surface morphology is crucial for realizing reproducible chemical termination, and use this insight to achieve a highly ordered, oxygenterminated surface with suppressed noise.We observe NV centers within 10 nm of the surface with coherence times extended by an order of magnitude.

arXiv:1811.00144•Physical Review X•Sep 26, 2019•241 citations

A coherence-protection scheme for quantum sensors based on ultra-shallow single nitrogen-vacancy centers in diamond

Anton Pershin, András Tárkányi, Vladimir Verkhovlyuk +2 more

High spatial resolution quantum sensing of near-surface nitrogen vacancy (NV) centers in diamond has enabled detection of magnetic, electrical, and thermal signals at the nanoscale. At depths of just a few nanometers, NV centers serve as localized quantum probes for external spins or low-dimensional materials, but their proximity to the surface also enhances decoherence caused by fluctuating nuclear spins. While advances in surface engineering have stabilized the charge state of NV centers at depths of tens of nanometers, achieving both ultra-shallow implantation (0.5-2 nm) and long-term spin coherence remains a central challenge. In this work, we show using first-principles modeling that, by exploiting the interaction of surface-induced strain and weak dc magnetic fields, the spin coherence times of 1-nm-deep NV centers can be greatly improved near the spin-phonon-confined regime at room temperature in 12C-rich diamonds. We also demonstrate that this protocol benefits ~ 10-nm-deep NV centers in natural diamond, enabling vector magnetometry at the nanoscale. Shallow NV centers in diamond are advantageous for quantum sensing but suffer from surface magnetic noise. Using first-principles simulations supported by experiments, the authors show that a combination of small magnetic fields and surface strain can significantly enhance spin coherence of 1 nm-deep NV centers.

arXiv:2501.00180•Nature Communications•Nov 6, 2025•9 citations

Understanding Surface-Induced Decoherence of NV Centers in Diamond

Jonah Nagura, Mykyta Onizhuk, Giulia Galli

Nitrogen vacancy centers (NV) in proximity to diamond surfaces are promising nanoscale quantum sensors. However, their coherence properties are negatively affected by magnetic and electric surface noise, whose origin and detailed impact have remained elusive. Using atomistic models of diamond surfaces derived with density functional theory, together with decoherence time calculations with cluster correlation expansion methods, we quantify the effects of surface crystallographic orientation and functionalization, and of the density of unpaired electrons on the NV Hahn-echo time $T_2$. We determine a crossover depth at which $T_2$ ceases to be limited by surface nuclear spins and recovers the bulk-limited value. We find that for static surface-electron baths, the ratio between the NV depth and the separation between surface electron spins determines a transition from fast-fluctuating to quasi-static noise, leading to a dependence of $T_2$ on orientation for specific surfaces. We also find that the modulation of $T_2$ by spin-phonon relaxations leads to motional-narrowing at sub-microsecond relaxation times. Importantly, our calculations show that it is only when accounting for surface-spin in-sequence hopping that measured $T_2$ values as a function of depth can be reproduced, thus highlighting the importance of hopping-mediated models to describe the surface spin noise affecting NV sensors. Overall, our work provides clear guidelines for engineering diamond surfaces to achieve enhanced NV coherence for quantum sensing and information processing applications.

quant-pharXiv:2512.10726•Dec 12, 2025•0 citations

Impact of Surface Functionalization on the Quantum Coherence of Nitrogen-Vacancy Centers in Nanodiamonds

Robert G. Ryan, Alastair D. Stacey, Kane Michael O'Donnell +5 more

Nanoscale quantum probes such as the nitrogen-vacancy (NV) center in diamonds have demonstrated remarkable sensing capabilities over the past decade as control over fabrication and manipulation of these systems has evolved. The biocompatibility and rich surface chemistry of diamonds has added to the utility of these probes but, as the size of these nanoscale systems is reduced, the surface chemistry of diamond begins to impact the quantum properties of the NV center. In this work, we systematically study the effect of the diamond surface chemistry on the quantum coherence of the NV center in nanodiamonds (NDs) 50 nm in size. Our results show that a borane-reduced diamond surface can on average double the spin relaxation time of individual NV centers in nanodiamonds when compared to thermally oxidized surfaces. Using a combination of infrared and X-ray absorption spectroscopy techniques, we correlate the changes in quantum relaxation rates with the conversion of sp 2 carbon to C–O and C–H bonds on the diamond surface. These findings implicate double-bonded carbon species as a dominant source of spin noise for near surface NV centers. The link between the surface chemistry and quantum coherence indicates that through tailored engineering of the surface, the quantum properties and magnetic sensitivity of these nanoscale systems may approach that observed in bulk diamond.

arXiv:1711.09972•ACS Applied Materials & Interfaces•Mar 20, 2018•56 citations

Spin coherence and depths of single nitrogen-vacancy centers created by ion implantation into diamond via screening masks

Shuntaro Ishizu, Kento Sasaki, Daiki Misonou +3 more

We characterize single nitrogen-vacancy (NV) centers created by 10-keVN+ ion implantation into diamond via thin SiO2 layers working as screening masks. Despite the relatively high acceleration energy compared with standard ones (<5keV) used to create near-surface NV centers, the screening masks modify the distribution of N+ ions to be peaked at the diamond surface [Ito et al., Appl. Phys. Lett. 110, 213105 (2017)]. We examine the relation between coherence times of the NV electronic spins and their depths, demonstrating that a large portion of NV centers are located within 10 nm from the surface, consistent with Monte Carlo simulations. The effect of the surface on the NV spin coherence time is evaluated through noise spectroscopy, surface topography, and x-ray photoelectron spectroscopy.

arXiv:2006.07763•Journal of Applied Physics•Jun 24, 2020•8 citations

Probing coherence properties of shallow implanted NV ensembles under different oxygen terminations

Jens Fuhrmann, Johannes Lang, Jochen Scharpf +5 more

Nitrogen vacancy (NV) color centers in diamond have shown great potential for various applications in quantum technology due to their long coherence times, high sensitivity to magnetic fields and atomic scale resolution. However, one major challenge in utilizing near surface NV centers is the decoherence caused by spins and charges fluctuating on the surface, which affects the spin properties of the sensors. To reduce the induced noise, various oxygen surface treatments such as low power oxygen plasma treatment and annealing under oxygen atmosphere have been explored to terminate the diamond surface and reduce its impact on NV coherence. We showed that the NV center’s coherence time can be enhanced up to a factor of 3 over a large spectral range of noise. Double electron–electron resonance measurements revealed an extra source of decoherence, scaling similarly as the P1 spin bath. The improvement in coherence times is accompanied with an increase in measured ketone/ether content and reduction of sp2 signal in x-ray photoelectron spectroscopy measurements. Finally we compared the performance of different NV ensembles and surface treatments for sensing external proton spins. The oxygen annealing is an effective procedure of enhancing the spin coherence times and reducing broad band spin noise experienced by shallow implanted ensemble NV centers in diamond.

•Dec 10, 2024•0 citations
The nitrogen-vacancy (NV) center in diamond exhibits spin-dependent fluorescence and long spin coherence times under ambient conditions, enabling applications in quantum information processing and sensing. NV centers near the surface can have strong interactions with external materials and spins, enabling new forms of nanoscale spectroscopy. However, NV spin coherence degrades within 100 nm of the surface, suggesting that diamond surfaces are plagued with ubiquitous defects. Prior work on characterizing near-surface noise has primarily relied on using NV centers themselves as probes; while this has the advantage of exquisite sensitivity, it provides only indirect information about the origin of the noise. Here we demonstrate that surface spectroscopy methods and single-spin measurements can be used as complementary diagnostics to understand sources of noise. We find that surface morphology is crucial for realizing reproducible chemical termination, and use this insight to achieve a highly ordered, oxygen-terminated surface with suppressed noise. We observe NV centers within 10 nm of the surface with coherence times extended by an order of magnitude.
The nitrogen-vacancy (NV) center in diamond exhibits spin-dependent fluorescence and long spin coherence times under ambient conditions, enabling applications in quantum information processing and sensing.NV centers near the surface can have strong interactions with external materials and spins, enabling new forms of nanoscale spectroscopy.However, NV spin coherence degrades within 100 nm of the surface, suggesting that diamond surfaces are plagued with ubiquitous defects.Prior work on characterizing near-surface noise has primarily relied on using NV centers themselves as probes; while this has the advantage of exquisite sensitivity, it provides only indirect information about the origin of the noise.Here we demonstrate that surface spectroscopy methods and single-spin measurements can be used as complementary diagnostics to understand sources of noise.We find that surface morphology is crucial for realizing reproducible chemical termination, and use this insight to achieve a highly ordered, oxygenterminated surface with suppressed noise.We observe NV centers within 10 nm of the surface with coherence times extended by an order of magnitude.
High spatial resolution quantum sensing of near-surface nitrogen vacancy (NV) centers in diamond has enabled detection of magnetic, electrical, and thermal signals at the nanoscale. At depths of just a few nanometers, NV centers serve as localized quantum probes for external spins or low-dimensional materials, but their proximity to the surface also enhances decoherence caused by fluctuating nuclear spins. While advances in surface engineering have stabilized the charge state of NV centers at depths of tens of nanometers, achieving both ultra-shallow implantation (0.5-2 nm) and long-term spin coherence remains a central challenge. In this work, we show using first-principles modeling that, by exploiting the interaction of surface-induced strain and weak dc magnetic fields, the spin coherence times of 1-nm-deep NV centers can be greatly improved near the spin-phonon-confined regime at room temperature in 12C-rich diamonds. We also demonstrate that this protocol benefits ~ 10-nm-deep NV centers in natural diamond, enabling vector magnetometry at the nanoscale. Shallow NV centers in diamond are advantageous for quantum sensing but suffer from surface magnetic noise. Using first-principles simulations supported by experiments, the authors show that a combination of small magnetic fields and surface strain can significantly enhance spin coherence of 1 nm-deep NV centers.
Nitrogen vacancy centers (NV) in proximity to diamond surfaces are promising nanoscale quantum sensors. However, their coherence properties are negatively affected by magnetic and electric surface noise, whose origin and detailed impact have remained elusive. Using atomistic models of diamond surfaces derived with density functional theory, together with decoherence time calculations with cluster correlation expansion methods, we quantify the effects of surface crystallographic orientation and functionalization, and of the density of unpaired electrons on the NV Hahn-echo time T2T_2T2​. We determine a crossover depth at which T2T_2T2​ ceases to be limited by surface nuclear spins and recovers the bulk-limited value. We find that for static surface-electron baths, the ratio between the NV depth and the separation between surface electron spins determines a transition from fast-fluctuating to quasi-static noise, leading to a dependence of T2T_2T2​ on orientation for specific surfaces. We also find that the modulation of T2T_2T2​ by spin-phonon relaxations leads to motional-narrowing at sub-microsecond relaxation times. Importantly, our calculations show that it is only when accounting for surface-spin in-sequence hopping that measured T2T_2T2​ values as a function of depth can be reproduced, thus highlighting the importance of hopping-mediated models to describe the surface spin noise affecting NV sensors. Overall, our work provides clear guidelines for engineering diamond surfaces to achieve enhanced NV coherence for quantum sensing and information processing applications.
Nanoscale quantum probes such as the nitrogen-vacancy (NV) center in diamonds have demonstrated remarkable sensing capabilities over the past decade as control over fabrication and manipulation of these systems has evolved. The biocompatibility and rich surface chemistry of diamonds has added to the utility of these probes but, as the size of these nanoscale systems is reduced, the surface chemistry of diamond begins to impact the quantum properties of the NV center. In this work, we systematically study the effect of the diamond surface chemistry on the quantum coherence of the NV center in nanodiamonds (NDs) 50 nm in size. Our results show that a borane-reduced diamond surface can on average double the spin relaxation time of individual NV centers in nanodiamonds when compared to thermally oxidized surfaces. Using a combination of infrared and X-ray absorption spectroscopy techniques, we correlate the changes in quantum relaxation rates with the conversion of sp 2 carbon to C–O and C–H bonds on the diamond surface. These findings implicate double-bonded carbon species as a dominant source of spin noise for near surface NV centers. The link between the surface chemistry and quantum coherence indicates that through tailored engineering of the surface, the quantum properties and magnetic sensitivity of these nanoscale systems may approach that observed in bulk diamond.
We characterize single nitrogen-vacancy (NV) centers created by 10-keVN+ ion implantation into diamond via thin SiO2 layers working as screening masks. Despite the relatively high acceleration energy compared with standard ones (<5keV) used to create near-surface NV centers, the screening masks modify the distribution of N+ ions to be peaked at the diamond surface [Ito et al., Appl. Phys. Lett. 110, 213105 (2017)]. We examine the relation between coherence times of the NV electronic spins and their depths, demonstrating that a large portion of NV centers are located within 10 nm from the surface, consistent with Monte Carlo simulations. The effect of the surface on the NV spin coherence time is evaluated through noise spectroscopy, surface topography, and x-ray photoelectron spectroscopy.
Nitrogen vacancy (NV) color centers in diamond have shown great potential for various applications in quantum technology due to their long coherence times, high sensitivity to magnetic fields and atomic scale resolution. However, one major challenge in utilizing near surface NV centers is the decoherence caused by spins and charges fluctuating on the surface, which affects the spin properties of the sensors. To reduce the induced noise, various oxygen surface treatments such as low power oxygen plasma treatment and annealing under oxygen atmosphere have been explored to terminate the diamond surface and reduce its impact on NV coherence. We showed that the NV center’s coherence time can be enhanced up to a factor of 3 over a large spectral range of noise. Double electron–electron resonance measurements revealed an extra source of decoherence, scaling similarly as the P1 spin bath. The improvement in coherence times is accompanied with an increase in measured ketone/ether content and reduction of sp2 signal in x-ray photoelectron spectroscopy measurements. Finally we compared the performance of different NV ensembles and surface treatments for sensing external proton spins. The oxygen annealing is an effective procedure of enhancing the spin coherence times and reducing broad band spin noise experienced by shallow implanted ensemble NV centers in diamond.