Quantum discrimination and estimation are pivotal for many quantum technologies, and their performance depends on the optimal choice of probe state and measurement. Here we show that their performance can be further improved by suitably tailoring the pulses that make up the interferometer. Developing an optimal control framework and applying it to the discrimination and estimation of a magnetic field in the presence of noise, we find an increase in the overall achievable state distinguishability. Moreover, the maximum distinguishability can be stabilized for times that are more than an order of magnitude longer than the decoherence time.
Quantum discrimination and estimation are pivotal for many quantum technologies, and their performance depends on the optimal choice of probe state and measurement. Here we show that their performance can be further improved by suitably tailoring the pulses that make up the interferometer. Developing an optimal control framework and applying it to the discrimination and estimation of a magnetic field in the presence of noise, we find an increase in the overall achievable state distinguishability. Moreover, the maximum distinguishability can be stabilized for times that are more than an order of magnitude longer than the decoherence time.
The ability to characterise a Hamiltonian with high precision is crucial for the implementation of quantum technologies. In addition to the well-developed approaches utilising optimal probe states and optimal measurements, the method of optimal control can be used to identify time-dependent pulses applied to the system to achieve higher precision in the estimation of Hamiltonian parameters, especially in the presence of noise. Here, we extend optimally controlled estimation schemes for single qubits to non-commuting dynamics as well as two interacting qubits, demonstrating improvements in terms of maximal precision, time-stability, as well as robustness over uncontrolled protocols.
A pivotal task in quantum metrology, and quantum parameter estimation in general, is to design schemes that achieve the highest precision with the given resources. Standard models of quantum metrology usually assume that the dynamics is fixed and that the highest precision is achieved by preparing the optimal probe states and performing optimal measurements. However, in many practical experimental settings, additional controls are usually available to alter the dynamics. Here we propose to use optimal control methods for further improvement of the precision limit of quantum parameter estimation. We show that, by exploring the additional degree of freedom offered by the controls, a higher-precision limit can be achieved. In particular, we show that the precision limit under the controlled schemes can go beyond the constraints put by the coherent time, which is in contrast with the standard scheme where the precision limit is always bounded by the coherent time.
Quantum control plays a crucial role in quantum inference tasks such as parameter estimation and state discrimination. Despite this, the fields of quantum control and quantum inference have remained largely disjoint. We bridge these fields, revealing that (i) quantum control determines the fundamental performance limits of quantum estimation and state discrimination, and (ii) control of statistical information measures enables performance approaching these limits. This thesis begins by establishing an axiomatic formalization of quantum control theory and developing a mathematical framework for analyzing, approximating, and controlling the evolution of quantum systems. A self-contained treatment of optimal quantum control is presented. This treatment exploits the unique structure of quantum dynamics rather than merely borrowing notions from classical control. Quantum control systems are shown to be universally contractive, which plays an important role in the treatment of optimal quantum control and in the derivation of various approximation results. Next, the thesis proceeds by addressing statistical inference problems, with emphasis on parameter estimation and state discrimination. Controlled information measures are introduced, providing more sensible alternatives to existing information measures for quantum inference, e.g., quantum Fisher information. Controlled information measures are shown to exhibit useful properties, e.g., data-processing inequalities. Methods for deriving achievability and converse bounds on controlled information measures are developed, and adaptive control techniques for information maximization are proposed. This thesis leverages a cross-pollination of control theory, statistical inference, and quantum information towards the development of an application-focused theory of quantum inference.
This thesis addresses the of developing a counter-part of the well established classical theory of control. We dwell on the fundamental fact that states are generally not perfectly distinguishable, and measurements typically introduce noise in the system being measured. Because of these, it is generally not clear whether the central concept of the classical control theory --- that of observing the system and then applying feedback --- is always useful in the setting. We center our investigations around the of transforming the state of a system into a given target state, when the system can be prepared in different ways, and the target state depends on the choice of preparation. We call this the quantum tracking problem and show how it can be formulated as an optimization that can be approached both numerically and analytically. This provides a simple route to the characterization of the trade-off between information gain and disturbance, and is seen to have several applications in information. In order to characterize the optimality of our tracking procedures, some figure-of-merit has to be specified. Naturally, distance measures for states are the ideal candidates for this purpose. We investigated several possibilities, and found that there is usually a compromise between physically motivated and mathematically tractable measures. We also introduce an alternative to the Uhlmann-Jozsa fidelity for mixed states, which besides reproducing a number of properties of the standard fidelity, is especially attractive because it is simpler to compute. We employ some ideas of convex analysis to construct optimal control schemes analytically. In particular, we obtain analytic forms of optimal controllers for stabilizing and tracking any pair of states of a single-qubit. In the case of stabilization, we find that feedback control is always useful, but because of the trade-off between information gain and disturbance, somewhat different from the type of feedback performed in classical systems. In the case of tracking, we find that feedback is not always useful, meaning that depending on the choice of states one wants to achieve, it may be better not to introduce any noise by the application of measurements. We also demonstrate that our optimal controllers are immediately applicable in several information applications such as state-dependent cloning, purification, stabilization, and discrimination. In all of these cases, we were able to recover and extend previously known optimal strategies and performances. Finally we show how optimal single-step control schemes can be concatenated to provide multi-step strategies that usually over-perform optimal control protocols based on a single interaction between the controller and the system.
Most studies in multiparameter estimation assume the dynamics is fixed and focus on identifying the optimal probe state and the optimal measurements. In practice, however, controls are usually available to alter the dynamics, which provides another degree of freedom. In this paper we employ optimal control methods, particularly the gradient ascent pulse engineering (GRAPE), to design optimal controls for the improvement of the precision limit in multiparameter estimation. We show that the controlled schemes are not only capable to provide a higher precision limit, but also have a higher stability to the inaccuracy of the time point performing the measurements. This high time stability will benefit the practical metrology, where it is hard to perform the measurement at a very accurate time point due to the response time of the measurement apparatus.
Abstract Multi-parameter quantum estimation has attracted considerable attention due to its broad applications. Due to the complexity of quantum dynamics, existing research places significant emphasis on estimating parameters in time-independent Hamiltonians. Here, our work makes an effort to explore multi-parameter estimation with time-dependent Hamiltonians. In particular, we focus on the discrimination of two close frequencies of a magnetic field by using a single qubit. We optimize the quantum controls by employing both traditional optimization methods and reinforcement learning to improve the precision for estimating the frequencies of the two magnetic fields. In addition to the estimation precision, we also evaluate the robustness of the optimization schemes against the shift of the control parameters. The results demonstrate that the hybrid reinforcement learning approach achieves the highest estimation precision, and exhibits superior robustness. Moreover, a fundamental challenge in multi-parameter quantum estimation stems from the incompatibility of the optimal control strategies for different parameters. We demonstrate that the hybrid control strategies derived through numerical optimization remain effective in enhancing the precision of multi-parameter estimation in spite of the incompatibilities, thereby mitigating incompatibilities between control strategies on the estimation precision. Finally, we investigate the trade-offs in estimation precision among different parameters for different scenarios, revealing the inherent challenges in balancing the optimization of multiple parameters simultaneously and providing insights into the fundamental distinction between quantum single-parameter estimation and multi-parameter estimation.