Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1604.04856 · Physical Review A

Quantum parameter estimation with optimal control

Jing Liu, Haidong Yuan

Published Jul 14, 2017• 133 citations
arXivHTMLPDF

Abstract

A pivotal task in quantum metrology, and quantum parameter estimation in general, is to design schemes that achieve the highest precision with the given resources. Standard models of quantum metrology usually assume that the dynamics is fixed and that the highest precision is achieved by preparing the optimal probe states and performing optimal measurements. However, in many practical experimental settings, additional controls are usually available to alter the dynamics. Here we propose to use optimal control methods for further improvement of the precision limit of quantum parameter estimation. We show that, by exploring the additional degree of freedom offered by the controls, a higher-precision limit can be achieved. In particular, we show that the precision limit under the controlled schemes can go beyond the constraints put by the coherent time, which is in contrast with the standard scheme where the precision limit is always bounded by the coherent time.

DOI
10.1103/physreva.96.012117

Related papers

Control-enhanced multiparameter quantum estimation

Jing Liu, Haidong Yuan

Most studies in multiparameter estimation assume the dynamics is fixed and focus on identifying the optimal probe state and the optimal measurements. In practice, however, controls are usually available to alter the dynamics, which provides another degree of freedom. In this paper we employ optimal control methods, particularly the gradient ascent pulse engineering (GRAPE), to design optimal controls for the improvement of the precision limit in multiparameter estimation. We show that the controlled schemes are not only capable to provide a higher precision limit, but also have a higher stability to the inaccuracy of the time point performing the measurements. This high time stability will benefit the practical metrology, where it is hard to perform the measurement at a very accurate time point due to the response time of the measurement apparatus.

arXiv:1710.06741•Physical Review A•Oct 26, 2017•105 citations

Optimized Quantum Parameter Estimation in Open Quantum Systems

S. Yang, Wei Cui

Quantum parameter estimation has been long pursued in various physics areas, such as quantum optics, quantum information processing, gravitational wave detection, and so on. Generally, the quantum system dynamics is usually assumed to be fixed and the system is closed, the highest precision can be achieved by preparing the optimal probe state and performing the quantum measurement based on ideal basis that saturates the quantum Cramer-Rao inequality. However, how to extend this problem to a more general open quantum system is still an open question. In this paper, we apply the optimal control theory, Pontrygin optimal principle, to enhance the parameter estimation precision in open quantum systems. The control laws and the control algorithm are exactly presented. Simulation results demonstrated the efficiency of the optimal control laws.

International Symposium on Autonomous Systems (ISAS)•Dec 6, 2020•1 citation

Quantum parameter estimation with general dynamics

Haidong Yuan, Chi‐Hang Fred Fung

Abstract One of the main quests in quantum metrology, and quantum parameter estimation in general, is to find out the highest achievable precision with given resources and design schemes to attain it. In this article we present a general framework for quantum parameter estimation and provide systematic methods for computing the ultimate precision limit, which is more general and efficient than conventional methods.

arXiv:1506.01909•npj Quantum Information•Apr 4, 2017•66 citations

Optimal quantum metrology under resource constraints

Qiushi Liu, 刘秋实

Nature imposes fundamental limits on how precisely we can probe the physical world. Quantum metrology is the study of achieving higher precision and accuracy in estimating the physical parameters by harnessing quantum resources. It is considered one of the most promising quantum technologies, offering significant advantages over classical ones in both near‑term and long‑term applications. However, existing theoretical research in quantum metrology often falls short of providing a unified and rigorous understanding of the ultimate precision under realistic experimental limitations on available quantum resources. In this thesis, we conduct a systematic investigation of the optimal precision limits in quantum metrology and identify the metrological strategies that achieve optimality under specified resource constraints. We primarily focus on the single-parameter estimation of quantum processes, a cornerstone task in quantum metrology. We first establish a general framework of strictly optimal quantum metrology using semidefinite programming within the formalism of higher-order quantum operations. This framework reveals a strict hierarchy for the performance of different families of strategies---parallel, sequential, and indefinite-causal-order ones---each subject to specific causal constraints. Our results rigorously demonstrate a quantum metrological advantage of indefinite causal order in finite-dimensional systems, which has recently aroused rapidly growing interest. In realistic scenarios, a fully optimized quantum metrology protocol may be experimentally demanding due to the complexity of state preparation and control. Tailored to practical constraints on the allowed ancilla and control operations, we propose a highly efficient tensor network algorithm to optimize the probe state and a long sequence of control for quantum metrology. When the number of control steps tends to infinity, we develop an asymptotic theory of quantum metrology for achieving the ultimate precision limit---Heisenberg limit---without ancilla. This contrasts with the traditional approach using quantum error correction for metrology that typically requires noiseless and controllable ancilla. Our results pave the way for exploiting the full potential of quantum resources in metrology. In the near term, our methods enable high-precision estimation with limited interaction with the unknown process using experimentally feasible control techniques. In the long term, they lay the foundation for scalable and fault-tolerant quantum metrology.

•Jan 1, 2025•0 citations

Robustness of Imperfect Initialization in Quantum Parameter Estimation

Liying Bao, Bo Qi

One of the most concerned problems in quantum metrology is exploiting quantum resources to increase the precision of quantum parameter estimation. One natural and standard way of improving the precision of estimation is letting the initial probe state being optimal. However, the optimal initial probe state on the one hand may be hard to identify, and on the other hand one cannot prepare the optimal initial state perfectly in practice. In this paper, we focus on the influence of the imperfect preparation of the optimal initial probe state to the precision limit of quantum parameter estimation. The analytical results are valid for unitary evolutions with arbitrary dimension.

Chinese Control Conference (CCC)•Jul 1, 2020•0 citations

Control-enhanced non-Markovian quantum metrology

Xiaodong Yang, Xinyue Long, Ran Liu +6 more

Quantum metrology promises unprecedented precision of parameter estimation, but it is often vulnerable to noise. While significant efforts have been devoted to improving the metrology performance in Markovian environments, practical control schemes specifically designed for non-Markovian noises are much less investigated. Here, we propose two control-enhanced quantum metrology schemes that are suitable for tackling general non-Markovian noises described by noise channels or noise spectra. We conduct experiments to verify the efficacy of these schemes on a nuclear magnetic resonance system. The experimental results involving multiqubit probes show that the parameter estimation precision can be greatly improved, significantly surpassing the standard quantum limit, with our schemes. At present, non-Markovian noises are widely encountered on diverse quantum devices, the proposed schemes are relevant for realistic metrology applications on these platforms. Quantum metrology, a powerful paradigm for surpassing classical measurement precision, has been extensively studied for Markovian noise, while most practical physical processes obey non-Markovian dynamics. In this paper, the authors propose control-enhanced quantum metrology schemes to counteract non-Markovian noise and experimentally verify their efficacy.

Communications Physics•Aug 21, 2024•16 citations
A pivotal task in quantum metrology, and quantum parameter estimation in general, is to design schemes that achieve the highest precision with the given resources. Standard models of quantum metrology usually assume that the dynamics is fixed and that the highest precision is achieved by preparing the optimal probe states and performing optimal measurements. However, in many practical experimental settings, additional controls are usually available to alter the dynamics. Here we propose to use optimal control methods for further improvement of the precision limit of quantum parameter estimation. We show that, by exploring the additional degree of freedom offered by the controls, a higher-precision limit can be achieved. In particular, we show that the precision limit under the controlled schemes can go beyond the constraints put by the coherent time, which is in contrast with the standard scheme where the precision limit is always bounded by the coherent time.
Most studies in multiparameter estimation assume the dynamics is fixed and focus on identifying the optimal probe state and the optimal measurements. In practice, however, controls are usually available to alter the dynamics, which provides another degree of freedom. In this paper we employ optimal control methods, particularly the gradient ascent pulse engineering (GRAPE), to design optimal controls for the improvement of the precision limit in multiparameter estimation. We show that the controlled schemes are not only capable to provide a higher precision limit, but also have a higher stability to the inaccuracy of the time point performing the measurements. This high time stability will benefit the practical metrology, where it is hard to perform the measurement at a very accurate time point due to the response time of the measurement apparatus.
Quantum parameter estimation has been long pursued in various physics areas, such as quantum optics, quantum information processing, gravitational wave detection, and so on. Generally, the quantum system dynamics is usually assumed to be fixed and the system is closed, the highest precision can be achieved by preparing the optimal probe state and performing the quantum measurement based on ideal basis that saturates the quantum Cramer-Rao inequality. However, how to extend this problem to a more general open quantum system is still an open question. In this paper, we apply the optimal control theory, Pontrygin optimal principle, to enhance the parameter estimation precision in open quantum systems. The control laws and the control algorithm are exactly presented. Simulation results demonstrated the efficiency of the optimal control laws.
Nature imposes fundamental limits on how precisely we can probe the physical world. Quantum metrology is the study of achieving higher precision and accuracy in estimating the physical parameters by harnessing quantum resources. It is considered one of the most promising quantum technologies, offering significant advantages over classical ones in both near‑term and long‑term applications. However, existing theoretical research in quantum metrology often falls short of providing a unified and rigorous understanding of the ultimate precision under realistic experimental limitations on available quantum resources. In this thesis, we conduct a systematic investigation of the optimal precision limits in quantum metrology and identify the metrological strategies that achieve optimality under specified resource constraints. We primarily focus on the single-parameter estimation of quantum processes, a cornerstone task in quantum metrology. We first establish a general framework of strictly optimal quantum metrology using semidefinite programming within the formalism of higher-order quantum operations. This framework reveals a strict hierarchy for the performance of different families of strategies---parallel, sequential, and indefinite-causal-order ones---each subject to specific causal constraints. Our results rigorously demonstrate a quantum metrological advantage of indefinite causal order in finite-dimensional systems, which has recently aroused rapidly growing interest. In realistic scenarios, a fully optimized quantum metrology protocol may be experimentally demanding due to the complexity of state preparation and control. Tailored to practical constraints on the allowed ancilla and control operations, we propose a highly efficient tensor network algorithm to optimize the probe state and a long sequence of control for quantum metrology. When the number of control steps tends to infinity, we develop an asymptotic theory of quantum metrology for achieving the ultimate precision limit---Heisenberg limit---without ancilla. This contrasts with the traditional approach using quantum error correction for metrology that typically requires noiseless and controllable ancilla. Our results pave the way for exploiting the full potential of quantum resources in metrology. In the near term, our methods enable high-precision estimation with limited interaction with the unknown process using experimentally feasible control techniques. In the long term, they lay the foundation for scalable and fault-tolerant quantum metrology.
One of the most concerned problems in quantum metrology is exploiting quantum resources to increase the precision of quantum parameter estimation. One natural and standard way of improving the precision of estimation is letting the initial probe state being optimal. However, the optimal initial probe state on the one hand may be hard to identify, and on the other hand one cannot prepare the optimal initial state perfectly in practice. In this paper, we focus on the influence of the imperfect preparation of the optimal initial probe state to the precision limit of quantum parameter estimation. The analytical results are valid for unitary evolutions with arbitrary dimension.
Quantum metrology promises unprecedented precision of parameter estimation, but it is often vulnerable to noise. While significant efforts have been devoted to improving the metrology performance in Markovian environments, practical control schemes specifically designed for non-Markovian noises are much less investigated. Here, we propose two control-enhanced quantum metrology schemes that are suitable for tackling general non-Markovian noises described by noise channels or noise spectra. We conduct experiments to verify the efficacy of these schemes on a nuclear magnetic resonance system. The experimental results involving multiqubit probes show that the parameter estimation precision can be greatly improved, significantly surpassing the standard quantum limit, with our schemes. At present, non-Markovian noises are widely encountered on diverse quantum devices, the proposed schemes are relevant for realistic metrology applications on these platforms. Quantum metrology, a powerful paradigm for surpassing classical measurement precision, has been extensively studied for Markovian noise, while most practical physical processes obey non-Markovian dynamics. In this paper, the authors propose control-enhanced quantum metrology schemes to counteract non-Markovian noise and experimentally verify their efficacy.