Effusive atomic oven nozzle design using an aligned microcapillary array

We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design, we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 °C, the collimated atomic beam flux directly after the nozzle is 1.2 × 10(14) atoms/s with a peak beam intensity greater than 5.0 × 10(16) atoms/s/sr. This suggests an oven lifetime of several decades of continuous operation.We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design, we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 °C, the collimated atomic beam flux directly after the nozzle is 1.2 × 10(14) atoms/s with a peak beam intensity greater than 5.0 × 10(16) atoms/s/sr. This suggests an oven lifetime of several decades of continuous operation.

arXiv:1407.6391Review of Scientific InstrumentsFeb 1, 201543 citations

Effusive Atomic Oven Nozzle Design Using a Microcapillary Array

Ruwan Senaratne, S. Rajagopal, Zachary A. Geiger +3 more

We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525 $^{\circ}$ C the collimated atomic beam flux directly after the nozzle is $1.2 \times 10^{14}$ atoms per second with a peak beam intensity greater than $5.0 \times 10^{16}$ atoms per second per steradian. This suggests an oven lifetime of several decades of continuous operation.We present a simple and inexpensive design for a multichannel effusive oven nozzle which provides improved atomic beam collimation and thus extended oven lifetimes. Using this design we demonstrate an atomic lithium source suitable for trapped-atom experiments. At a nozzle temperature of 525$^{\circ}$C the collimated atomic beam flux directly after the nozzle is $1.2 \times 10^{14}$ atoms per second with a peak beam intensity greater than $5.0 \times 10^{16}$ atoms per second per steradian. This suggests an oven lifetime of several decades of continuous operation.

Jul 23, 20141 citation

Robust high-temperature atomic beam source with a microcapillary array

Peter Dotti, Xiao Chai, Jeremy L. Tanlimco +2 more

We present a new design for a directed high-flux, high-temperature atomic vapor source for use in atomic physics experiments conducted under vacuum. An externally heated nozzle made of an array of stainless steel microcapillaries produces a collimated atomic beam. Welded stainless steel construction allows for operation at high source temperatures without exposing delicate ConFlat vacuum flanges to thermal stress, greatly enhancing robustness compared to previously published designs. We report in operando performance measurements of an atomic beam of lithium at various operating temperatures.We present a new design for a directed high-flux, high-temperature atomic vapor source for use in atomic physics experiments conducted under vacuum. An externally heated nozzle made of an array of stainless steel microcapillaries produces a collimated atomic beam. Welded stainless steel construction allows for operation at high source temperatures without exposing delicate ConFlat vacuum flanges to thermal stress, greatly enhancing robustness compared to previously published designs. We report in operando performance measurements of an atomic beam of lithium at various operating temperatures.

arXiv:2502.07228Review of Scientific InstrumentsJun 1, 20250 citations

A high-flux atomic strontium oven with light-driven flux modulation

Kenneth M. Hughes, J. Schelfhout, Charu Mishra +3 more

A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of $8(1)\times 10^{14}$ atoms/s is achieved at an oven temperature of 475°C, of which we estimate $1.8(2)\times 10^{13}$ atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against clogging of the nozzle. The nozzle is fabricated by micro-machining of fused silica using selective laser etching; this specialised technique is capable of making many thousands of fine microchannels and is suitable for batch production. Operating with only electrical heating, using <20W of electrical power, a total flux of $8(1)\times 10^{14}$ atoms/s is achieved at an oven temperature of 475°C, of which we estimate $1.8(2)\times 10^{13}$ atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.

arXiv:2603.25567Mar 26, 20260 citations

A compact and efficient strontium oven for laser-cooling experiments

M. Schioppo, N. Poli, M. Prevedelli +4 more

Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0 × 10(13) s(-1) cm(-2) at the oven temperature of 450 °C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.

arXiv:1209.5639Review of Scientific InstrumentsOct 1, 201260 citations

A simple atomic beam oven with a metal thermal break

Chetan Vishwakarma, Jay Mangaonkar, Kushal Patel +3 more

We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.We report the design and construction of a simple, easy to machine high temperature oven for generating an atomic beam in laser cooling experiments. This design eliminates the problem of thermal isolation of the oven region from the rest of the vacuum system without using a glass or ceramic thermal break. This design simplifies the construction and operation of high temperature ovens for elements having low vapor pressure. We demonstrate the functionality of such a source for strontium (Sr) atoms. We generate a high flux of Sr atoms for use in laser cooling and trapping experiments. The optimization of the design of the metal thermal break is done using a finite element analysis.

arXiv:1810.09090Review of Scientific InstrumentsMay 1, 20196 citations

^{\circ}

C the collimated atomic beam flux directly after the nozzle is

1.2 \times 10^{14}

atoms per second with a peak beam intensity greater than

5.0 \times 10^{16}

atoms per second per steradian. This suggests an oven lifetime of several decades of continuous operation.

8(1)\times 10^{14}

atoms/s is achieved at an oven temperature of 475°C, of which we estimate

1.8(2)\times 10^{13}

atoms/s could be captured. A heated in-vacuum sapphire window grants optical access directly opposite the oven, and can be cleared of metallization without breaking vacuum. We used this optical access to modulate the flux of the atomic beam by direct illumination of the nozzle and the strontium metal with high-power laser light. Heating by laser light increased the useful flux by a factor of up to 16(3) on a timescale of 40s, and a factor of 2.5(5) on a timescale of 1s. This flux modulation serves to increase the operating lifetime of the oven. We report experimental measurements of the performance of the oven in long-term operation over many months.