We show that the requirement for fault-tolerant quantum computation based on cavity-QED is dramatically relaxed by applying the suitable fault-tolerant schemes and gate error optimization for chosen two-qubit gate method.
A condition for fault-tolerant quantum computation (FTQC) with cavity schemes is discussed. It is shown that the condition is very hard if the standard error threshold of FTQC is simply applied. To relax the condition, we propose to combine the cavity-quantum-electrodynamics (QED) scheme proposed by Duan et al. [Phys. Rev. A 72, 032333 (2005)] and Xiao et al. [Phys. Rev. A 70, 042314 (2004)] with the recently proposed FTQC scheme with probabilistic two-qubit gates [Goto and Ichimura, Phys. Rev. A 80, 040303(R) (2009)]. It is shown that the condition for FTQC is dramatically relaxed compared to the case of the standard threshold. The optimization of the cavity-QED scheme is also discussed.
A scheme for fault-tolerant quantum computation (FTQC) with probabilistic two-qubit gates is proposed. The error thresholds for FTQC are estimated by numerical simulations, where the conditional error probability (the error probability under the condition of ``success'') is taken into account in addition to the failure probability. As a result, it turns out that FTQC is possible even if the failure probability is as high as 10% (5%) under the condition that the conditional error probability is lower than about 0.03% (0.3%). These results mean that the present scheme has a great advantage in using probabilistic two-qubit gates.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
A quantum computer is a powerful machine that provides a new approach to information processing based on quantum mechanics. However, basically, qubits are very vulnerable to errors, thus a quantum error correction code (QECC) is needed to build a reliable quantum computer. Moreover, simply using QECCs is not sufficient in order that a quantum computer can tolerate errors. In quantum computation, each operation must be performed on the encoded states. Even when the gates used to perform these operations are noisy, the quantum computation must be tolerable to the errors. This is called fault-tolerant quantum computation and it is an essential condition for implementing a quantum computer. However, considering the fault tolerance, the overhead of the quantum computer increases exponentially. In this paper, we introduce fault-tolerant quantum computation and schemes to reduce the its overhead.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
We analyze the requirements for fault-tolerant quantum computation with atom-atom gates based on cavity quantum electrodynamics (cQED) mediated by a photon with a finite pulse length. For short photon pulses, the distorted shape of the reflected pulses from the cQED system is a serious error source. In the previous study by Goto and Ichimura [Phys. Rev. A 82, 032311 (2010)], only the photon loss is minimized without considering the shape distortion to optimize the system parameters. Here we show an improved optimization method to minimize the infidelity due to the shape distortion and the photon losses in a well-balanced manner for the fault-tolerant scheme using probabilistic gates [Phys. Rev. A 80, 040303(R) (2009)]. Under this optimization, we discuss the fault-tolerant quantum computing requirement for short pulses. Finally, we show that reducing the cavity length is an effective way to reduce the errors of this type of gate in the case of short photon pulses.