A quantum computer is a powerful machine that provides a new approach to information processing based on quantum mechanics. However, basically, qubits are very vulnerable to errors, thus a quantum error correction code (QECC) is needed to build a reliable quantum computer. Moreover, simply using QECCs is not sufficient in order that a quantum computer can tolerate errors. In quantum computation, each operation must be performed on the encoded states. Even when the gates used to perform these operations are noisy, the quantum computation must be tolerable to the errors. This is called fault-tolerant quantum computation and it is an essential condition for implementing a quantum computer. However, considering the fault tolerance, the overhead of the quantum computer increases exponentially. In this paper, we introduce fault-tolerant quantum computation and schemes to reduce the its overhead.
A quantum computer is a powerful machine that provides a new approach to information processing based on quantum mechanics. However, basically, qubits are very vulnerable to errors, thus a quantum error correction code (QECC) is needed to build a reliable quantum computer. Moreover, simply using QECCs is not sufficient in order that a quantum computer can tolerate errors. In quantum computation, each operation must be performed on the encoded states. Even when the gates used to perform these operations are noisy, the quantum computation must be tolerable to the errors. This is called fault-tolerant quantum computation and it is an essential condition for implementing a quantum computer. However, considering the fault tolerance, the overhead of the quantum computer increases exponentially. In this paper, we introduce fault-tolerant quantum computation and schemes to reduce the its overhead.
To use quantum information processing in a wide range of applications, fault-tolerant processing is essential to cope with noise.Fault-tolerant quantum computing using quantum error-correcting codes is scalable, but the overhead of number of qubits or processes is large, so improving efficiency is an important research theme.Quantum error mitigation incurs computational cost, but it does not require the overhead of number of qubits, so it is expected to be used for near-future applications.In this article, we introduce our research activities on these topics as well as our studies toward the implementation of quantum information processing.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Quantum computing is a field that shows tremendous possibilities and promise. It can provide an exponential speedup compared to classical computers in many computational problems, including simulations of general quantum mechanical systems, pattern finding and solving linear systems. Quantum computations can be performed by making use of qubits and performing operations, called gates, on them. A physical realisation of a qubit will be faulty, and to combat the errors that will inadvertently but unavoidably occur, the use of a quantum error correction code (QECC) is needed. A QECC is able to correct static errors; errors that occur on the states. However, it can not correct errors that occur on and during the operations. To make the computer resilient to these errors, the implementation of the QECC has to be performed fault-tolerantly. A fault-tolerant implementation of a quantum operation is designed in such a way that errors that happen during the operation, through faulty gates, do not propagate to errors on the states that are not correctable any more by the QECC. Hence, error propagation is a key concept in fault-tolerance. Every element of a general quantum circuit needs to be designed fault-tolerant. One of the elements that will be needed in any realistic quantum computer architecture is the possibility of exchanging the states of two qubits, so that an arbitrary pair of qubits can be brought physically close, allowing the implementation of multi-qubit gates. Exchanging the states of two qubits can be performed by a fault-tolerant SWAP gate, that makes use of one ancilla qubit. In this thesis, a fault-tolerant SWAP operation is implemented on the IBM 5-qubit ‘Tenerife’ device. It is characterized as a quantum channel by performing quantum process tomography (QPT). The CPTP constraints of quantum channels in the framework of QPT are discussed and a method of obtaining a CPTP estimate of an initial QPT reconstruction is given. The error process of the fault-tolerant SWAP is analysed and subsequently compared to a normal implementation of the SWAP gate, on which tomography is performed as well. The main measure that is used in the comparison is the ratio r of multi-qubit errors (or correlated) to single-qubit (or uncorrelated) errors in the two implementations. SPAM errors are an important source of estimated infidelity. To filter these SPAM errors and obtain a better estimate of only the circuits, SPAM errors are approximated to be only measurement errors. The errors are characterized by performing tomography on an arbitrary short identity channel, and subsequently using this as an estimate of the measurement error map. This gives a method to estimate a representation of the circuit itself. We can report on an error ratio r of 0.170±0.0029 for the fault-tolerant SWAP operation and an error ratio r of 1.256 ± 0.0129 for the non-fault-tolerant SWAP operation. However, the total error in the fault-tolerant SWAP is much higher, resulting in a process fidelity Fp = 0.608 for the fault-tolerant implementation and Fp = 0.742 for the normal implementation. This is due to the larger number of gates in the fault-tolerant circuit. This research shows that a SWAP operation can be implemented fault-tolerantly, but that the error rates of the devices need to be reduced before their use becomes viable.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
Quantum states are very delicate, so it is likely some sort of quantum error correction will be necessary to build reliable quantum computers. The theory of quantum error-correcting codes has some close ties to and some striking differences from the theory of classical error-correcting codes. Many quantum codes can be described in terms of the stabilizer of the codewords. The stabilizer is a finite Abelian group, and allows a straightforward characterization of the error-correcting properties of the code. The stabilizer formalism for quantum codes also illustrates the relationships to classical coding theory, particularly classical codes over GF(4), the finite field with four elements. To build a quantum computer which behaves correctly in the presence of errors, we also need a theory of fault-tolerant quantum computation, instructing us how to perform quantum gates on qubits which are encoded in a quantum error-correcting code. The threshold theorem states that it is possible to create a quantum computer to perform an arbitrary quantum computation provided the error rate per physical gate or time step is below some constant threshold value.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit.
We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.