The Nitrogen-Vacancy (NV) color center is a defect of diamond which behaves as an artificial atom hosted in a solid-state matrix. Due to its electron spin properties which can be read-out and manipulated as an elementary quantum system, the NV center has found a wide panel of applications as a qubit for quantum information and as a magnetic field sensor. However these applications require to control the properties of the NV centers and their localization. This doctoral thesis investigates methods allowing us to tailor the properties of NV centers by combining techniques for the implantation of nitrogen atoms and the plasma-assisted (CVD) synthesis of diamond.The manuscript is divided into six chapters. The first chapter summarizes the properties of the NV center which will set our objectives for the NV engineering. The second chapter will describe how arrays of NV centers can be created using Focused Ion Beam implantation. The results open a wide range of applications for the targeted creation of NV centers in diamond structures such as photonic crystals and tips. However the low kinetic energy which is required for achieving implantation within a spot of 10-nm diameter leads to shallow defects which properties are strongly affected by the sample surface. The third chapter investigates how the overgrowth of a diamond layer over implanted NV centers can remove the detrimental influence of the surface. The fourth and fifth chapters describe effective methods for NV center fabrication through the control of the CVD growth conditions of the hosting crystal. Thin layers with high NV doping can be grown and almost perfect control of the orientation of the NV axis can be achieved. With the goal to optimize the spin coherence properties, the sixth chapter investigates how the electron spin of the NV center can be protected from decoherence effects induced by magnetic noise due to the unpolarized spins in the diamond lattice.
The nitrogen vacancy (NV) center in diamond has in recent years emerged as a promising solid state system for quantum information processing and sensing applications.However, using NV centers to build up quantum networks for these applications faces several challenges, such as the lack of efficient interface between NVs and photons, difficulty of maintaining spin coherence times, and scalable techniques for fabrication of NV-photon networks.This thesis focuses on overcoming these challenges by fabricating diamond devices to improve the collection efficiency of NV photon emission, especially from the zero phonon line (ZPL), while maintaining long spin coherence times after fabrication.After an introduction to the subject matter in Chapter 1, Chapter 2 discusses a fabrication technique to produce vertical membranes out of bulk diamond plates.This work showed that after reactive ion etching, the spin properties of isolated NVs in diamond nanostructures were largely preserved.We also observed increased photoluminescence collection from shallow implanted NV centers in these slabs.In Chapter 3, we describe a versatile nanofabrication method based on re-usable silicon membrane hard masks, patterned using standard lithography and mature silicon processing technology.These masks are transferred precisely onto targeted regions of diamond membranes, where photonic devices can be realized without the need for spin coating, wet etching or electron beam exposure.Chapter 4 describes and demonstrates an alternative technique for fabricating one-dimensional photonic crystal (PC) cavities in single-crystal diamond by a combination of reactive ion etching (RIE) and focused ion beam milling.We compare it to transferred silicon hard mask lithography with RIE.Chapter 5 demonstrate NV-nanocavity systems in the strong Purcell regime with consistently high Q factors while preserving the long spin coherence times of NVs.These systems enable coherent spin control of cavity-coupled semiconductor qubits with coherence times exceeding 200 s -an increase by two orders of magnitude over previously reported optical cavity-coupled solid-state qubits.helped monitor the whole process.Special thanks go to our collaborators from BNL nanofabrication experts, namely to
This thesis presents research on improving spin coherence times of bulk and single NV centres in CVD diamond via material engineering, alongside electrical readout of the NV electronic ground state. A chemical-mechanical polishing (CMP) technique is investigated to remove sub-surface damage on (001) surfaces caused by scaife polishing. 13C-limited coherence times of shallow implanted NV centres were compared across samples prepared with ICP-RIE or CMP, with CMP samples showing an improvement of 340µs. The effect of co-doping with phosphorus and sulphur on charge stability, creation yield, spin coherence times, and AC sensitivity of shallow NV centres was studied. 10 CVD diamond samples were characterised using above-bandgap imaging, photoluminescent, and Raman spectroscopy. Coherence times in four samples were measured with a home-built confocal microscope. A sample implanted with 110keV32S ions at 1011cm-2 showed the best shot noise-limit to the AC sensitivity. Preferentially-oriented NV centres were produced on pseudo-(111) surfaces. (001) diamonds were nickel-etched to produce (111) trenches overgrown with nitrogen-containing diamond. Preferential orientation was evidenced via optically detected magnetic resonance under an external ⟨111⟩ magnetic field. High-density nitrogen overgrowth in trenches gave short T2 times (<2µs), while lower-density samples showed mean spin coherence times of 160µs, closer to the unetched surface. Finally, a home-built device for electrical spin-state readout is described, including a confocal microscope, metallic contacts, and a readout PCB. Photoelectrically detected magnetic resonance contrast of 63% (compared to 5% optically) is demonstrated , with initial RF device development.
When the word diamond comes up, the majority of people thinks about engagement rings or gemstones. In fact, it is additionally, one of the most promising host materials for the implementation of advanced technology, exploiting the nature of quantum physics. Such quantum technologies have disruptive potential, ones the quantum effects can be applied in macroscopic, commercial products. The nitrogen-vacancy (NV) centre in diamond is a promising candidate to perform such tasks in the fields of quantum computation, quantum cryptography or metrology. Especially in the field of quantum sensing, the NV sensor impresses with nano-scale spatial resolution paired with high sensitivity. The electronic spin of the atomic-sized point defect can be initialised, manipulated and read-out at ambient conditions and coherence lifetimes are comparably long. Diamond magnetometers based on negatively charged NV centres have shown to be very attractive, and the sensitivity goes down to the single-atom level. In order to exploit such a high sensitivity level for sensing prospects, in this thesis, the NV centres are fabricated well confined in a certain distance to the diamond surface, since the detectable field usually decays with the third power of the distance between sensor and target. The surface depicts a fracture of the spin wise protecting diamond lattice and charge fluctuations affect the stability of NV centres, which are overcome by diamond surface termination. In order to improve the sensitivity further, the sensor density, measurement contrast and interaction time are increased. The nitrogen doping technique, which is applied during a plasma-enhanced chemical vapour deposition (PECVD) diamond growth process is used to fabricate NV centre ensembles aligned along one diamond crystal axis, thereby improving the measurement contrast by a factor up to four. The interaction time limiting spin bath is analysed using the sensor capabilities of the NVs, which leads to enhanced growth strategies and the fabrication of sensitivity optimised NV centre ensembles for magnetometry applications.
Because of their high sensitivity, quantum materials are extremely promising for new technologies. The main challenge lies in maintaining a sufficiently quantum coherence times for quantum computation or quantum sensing systems. NV centers in diamond which are point defects consisting of a substitutional nitrogen atom neighboring an atomic vacancy, where an electron pair can reside in a triplet state – are ideal candidates for the development of industrial-scale quantum systems. These spin states exhibit ms-long coherence times at room temperature and can be manipulated optically, hence opening interesting perspectives for sending magnetic fields with high sensitivity1.At HiQuTe Diamond, we take up the challenge of mastering the entire nitrogen-doped diamond production chain synthesized by Microwave Plasma-Assisted Chemical Vapor Deposition (MPACVD). We aim at creating affordable diamonds specially engineered to achieve long coherence times with high NV density and high doping uniformity. This quest require to overcome the impact of several external factors that contribute to electron spin decoherence. First, the chemical composition of the diamond, specifically the types and concentrations of impurities within the diamond matrix (such as substitutional nitrogen NS, NV centres, mono-vacancies and clusters, hydrogen, etc.), as well as their electrical charge states (NS⁰, NS⁺, NV⁰, NV⁻) should be carefully controlled. Thanks to extensive scientific research conducted over the past decade, combined with our own R&D efforts, we are now able to quantify these parameters using experimental techniques compatible with industrial applications (Raman and UV-Vis spectroscopy) and compare our results with key performance indicators2. Second, we study the relationship between coherence (T2*) and strain inhomogeneities in our diamond layers, which we analyse using birefringence measurements. Our findings demonstrate our capability to produce CVD diamond layers with reduced strain and extended defect and confirm that strain could be a critical limiting factor for T2*.In this poster, I will review the efforts carried out at HiQuTe Diamond to develop specific material that is well suited for quantum sensing applications.References1.Barry, J. F., Schloss, J. M., Bauch, E., Turner, M. J., Hart, C. A., Pham, L. M., & Walsworth, R. L. (2020). Sensitivity optimization for NV-diamond magnetometry. Reviews of Modern Physics, 92(1), 015004.2.Langer, J. (2022). Quantum-grade diamond for cavity-based solutions. Fraunhofer Verlag.
Silicon has turned from a niche laboratory-scale material into the backbone of modern electronics. Diamond functionalized with color centers could follow a similar path and grow from proof-of-concepts experiments to application-oriented quantum technologies. Quantum sensing, communication, and information processing with color centers has been proven to work in scientific experiments and enhanced sensitivities as well as novel functionalities have been reported. While the first generation of diamond quantum devices relied on color centers formed uncontrolled in natural diamond with a high statistical variation in composition and crystallinity, the situation has changed nowadays. With the emergence of high purity monocrystals and the option for isotopic purification of the carbon matrix, technological progress in materials science on the atomic-scale enabled tailoring the spin properties in diamond. But, since many color centers typically require vacancies to combine with impurities in the carbon lattice via diffusion, the generation of color centers underlies a statistical process providing only little control on the center's final position in the crystal lattice. The negatively charged nitrogen-vacancy (NV
−) center is the most studied optically active defect in diamond and exhibits remarkable spin properties and sensing capabilities, even on the nanoscale and at room temperature. The spin properties of NV
− centers close to the surface (1\,nm - 30\,nm) have been thoroughly studied and the deeper the spins are located in diamond the less decoherence from surface defects is observed. Creating NV
− centers at the surface by nitrogen ion implantation and burying them beneath a thin diamond layer via chemical vapor deposition (CVD) of diamond is reported to enhance the coherence times significantly. By separating the color center generation from controlling the resulting depth by an additional diamond layer, narrow depth profiles can be achieved by reducing the ion energy during implantation. Although the coherence properties improve, many of the implanted NV
− center are reported to vanish in the hydrogen-rich plasma of growth CVD chambers. The mechanism responsible for the instability of NV
− centers towards the plasma remains unclear, though. One hypothesis is the formation of nitrogen-vacancy-hydrogen centers from diffusing hydrogen and implanted NV
− centers but is has not been proven, yet. Here, we demonstrate the fabrication of depth confined NV
− centers by combining low energy (1\,keV - 5\,keV) ion implantation and CVD overgrowth. By increasing the thickness of the overgrown layer (6\,nm - 100\,nm) the influence of surface noise is shown to decrease leading to bulk-like coherence properties of up to $450\,\upmu$s (Hahn-echo) and
T2∗ dephasing times around $20\,\upmu$s. Monitoring the NV
− density as a function of the overgrowth time, we analyze the kinetics of the passivation in case of implanting ion doses of 10
11 15N
+/cm
2 and 10
12 15N
+/cm
2. The passivation turns out to occur faster for lower doses offering insights into sub-surface hydrogen diffusion in diamond. Analyzing the spin bath before and after overgrowth reveals a drastic reduction in paramagnetic spins after the CVD process but no NVH
− is found around the surviving NV
− centers. Checking the chemical composition in overgrown implantation sites with secondary-ion-mass-specrometry (SIMS), however, confirms significant amounts of hydrogen in the
15N-implanted layers. Since the concentration found for hydrogen exceeds the one for nitrogen by far, we suggest that diffusing hydrogen interacts also with vacancies forming probably mostly diamagnetic defects. In the last part of this dissertation, NV
− centers are generated with sub-nanometer precision below a thin
13C-enriched layer for quantum simulation. For fabricating the spin architecture starting from a
12C base layer, we overgrow implanted nitrogen with a
13C layer and bury the spins beneath a 30\,nm-thick
12C capping layer. By measuring the coupling strength between the electron and nuclear spins, we deduce a NV
− placement accuracy reaching below one nanometer with respect to the
13C-layer. Regarding the spin properties of the electron spins, no reduction in
T2 is observed despite of the proximity to the dense
13C-bath. As a consequence, the overgrowth of NV
− centers is demonstrated as a bottom-up approach to produce buried spin architectures with sharp isotopic transitions and efficient
13C-NV
− coupling. Together with the potential for bulk-like coherence properties the synergy of implantation and overgrowth is a powerful tool to fabricate reproducible quantum systems with tailored properties and high depth confinement.