© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

EURASIP Journal on Wireless Communications and Networking

Low-complexity decoding of LDPC codes using reduced-set WBF-based algorithms

Sadjad Haddadi, Mahmoud Farhang, Mostafa Derakhtian

Published Sep 21, 2020• 7 citations

Abstract

Abstract We propose a method to substantially reduce the computational complexity of iterative decoders of low-density parity-check (LDPC) codes which are based on the weighted bit-flipping (WBF) algorithm. In this method, the WBF-based decoders are modified so that the flipping function is calculated only over a reduced set of variable nodes. An explicit expression for the achieved complexity gain is provided and it is shown that for a code of block length N, the decoding complexity is reduced from O(N2) to O(N). Moreover, we derive an upper bound for the difference in the frame error rate of the reduced-set decoders and the original WBF-based decoders, and it is shown that the error performances of the two decoders are essentially the same.

DOI: 10.1186/s13638-020-01791-5

Related papers

Sum of the magnitude based weighted bit-flipping decoding algorithms for LDPC codes

Zhang Gao-yua

Two simple and efficient weighted bit flipping(WBF)decoding algorithms for low density paritycheck(LDPC)codes are proposed,in which the sum of the variable nodes' magnitude is introduced to compute the reliability of the parity checks.Simulation results shows that the performance of one of the improved scheme is better than that of traditional WBF and modified WBF(MWBF)algorithms about 1.65dB and 1.31dB at BER of 10-5 over an additive white Gaussian noise channel,respectively,while the average number of decoding iterations is significantly reduced.

Systems engineering and electronics•Jan 1, 2014•0 citations

A Modification to Weighted Bit-Flipping Decoding Algorithm for LDPC Codes Based on Reliability Adjustment

D. Qian, M. Jiang, Chihang Zhao +1 more

In this paper, a modification to the weighted bit- flipping (WBF) decoding algorithm for low-density parity-check (LDPC) codes is proposed. This modification, based on the adjustment in reliabilities of the check sums during iterative decoding, can be applied to various WBF algorithms. Our studies show that the modification can be achieved with a small increase in complexity, but leads to an appealing improvement in error performance.

International Conference on Communications•Jan 1, 2008•4 citations

Combined modified weighted bit-flipping decoding of low-density parity-check codes

Haiyi Huang, Yige Wang, Gang Wei

In this paper, we propose a combined modified weighted bit-flipping (CM-WBF) algorithm for low-density parity-check (LDPC) codes. The new algorithm combines modified weighted bit-flipping (M-WBF) with low complexity weighted bit-flipping (LC-WBF). Simulation results show that the new algorithm offers a better trade-off among performance, complexity, and convergence compared with M-WBF, LC-WBF and RR-WBF algorithms for finite geometry LDPC (FG-LDPC) codes.

International Conference on Wireless Communications and Signal Processing (WCSP)•Oct 1, 2012•1 citation

A low complexity and high performance LDPC decoding algorithm

Junming Chang, Hao Wang, Chuiyuan Kong

LDPC (Low Density Parity Check Codes) is a low -density puppet test code applied to channel codes. Among the existing LDPC decoding algorithms, the LLR-BP decoding arithmetic is too complicated to calculate the calculation due to the containing a large number of bilateral positive cut functions. Therefore, this article proposes a LDPC decoding algorithm that combines the Modified Weighted Bit Flipping Decoding Algorithm (MWBF) with the Logarithmic Likelihood Ratio Based Confidence Propagation Algorithm (LLR-BP). In the process of the LLR-BP decoding iteration, the introduction of the MWBF algorithm not only does it reduce the complexity of iteration and decoding, but also avoids the traditional weighted bit-flipping decoding algorithm (WBF). Excessive effects of code performance.

International Conference on Digital Signal and Computer Communications (DSCC)•Jul 28, 2023•1 citation

Studies on Practical Low Complexity Decoding of Low-Density Parity-Check Codes

Zhiqiang Cui, Zhongfeng Wang

This paper studies practical low complexity decoding of Low Density Parity-Check (LDPC) codes. We first investigate VLSI implementation issues of two state-of-the-art Weighted Bit Flipping (WBF) based decoding algorithms that were recently proposed in the literature. Then we present an optimized 2-bit soft decoding approach. It is shown that the proposed approach has comparable hardware complexity with either of the two WBF-based algorithms while it has significantly better decoding performance.

SiPS ... design and implementation - IEEE Workshop on Signal Processing Systems•Oct 1, 2007•0 citations

A modified weighted bit-flipping algorithm for LDPC codes

Haigang Zhang, Dongfeng Yuan, Cheng‐Xiang Wang

In this paper, a modified weighted bit-flipping (WBF) algorithm is proposed for finite geometry low-density parity-check (FG-LDPC) codes. The calculation for the flipping function in the new method includes all the elements in sum product algorithm (SPA) instead of the minimum one in most existing methods. Simulation results show that the proposed method exhibits better performance than the best method available in the literature so far. The performances of different algorithms are also considered in random constructed LDPC codes. The reliability ratio based WBF (RRWBF) method performs the best in this kind of codes and the proposed method performs very closely to the RRWBF method. The decoding complexities for both FG-LDPC and random constructed LDPC are also analyzed.

IET International Conference on Wireless, Mobile and Multimedia Networks (ICWMMN)•Jan 1, 2008•1 citation

Abstract We propose a method to substantially reduce the computational complexity of iterative decoders of low-density parity-check (LDPC) codes which are based on the weighted bit-flipping (WBF) algorithm. In this method, the WBF-based decoders are modified so that the flipping function is calculated only over a reduced set of variable nodes. An explicit expression for the achieved complexity gain is provided and it is shown that for a code of block length N, the decoding complexity is reduced from O(N2) to O(N). Moreover, we derive an upper bound for the difference in the frame error rate of the reduced-set decoders and the original WBF-based decoders, and it is shown that the error performances of the two decoders are essentially the same.

Two simple and efficient weighted bit flipping(WBF)decoding algorithms for low density paritycheck(LDPC)codes are proposed,in which the sum of the variable nodes' magnitude is introduced to compute the reliability of the parity checks.Simulation results shows that the performance of one of the improved scheme is better than that of traditional WBF and modified WBF(MWBF)algorithms about 1.65dB and 1.31dB at BER of 10-5 over an additive white Gaussian noise channel,respectively,while the average number of decoding iterations is significantly reduced.

LDPC (Low Density Parity Check Codes) is a low -density puppet test code applied to channel codes. Among the existing LDPC decoding algorithms, the LLR-BP decoding arithmetic is too complicated to calculate the calculation due to the containing a large number of bilateral positive cut functions. Therefore, this article proposes a LDPC decoding algorithm that combines the Modified Weighted Bit Flipping Decoding Algorithm (MWBF) with the Logarithmic Likelihood Ratio Based Confidence Propagation Algorithm (LLR-BP). In the process of the LLR-BP decoding iteration, the introduction of the MWBF algorithm not only does it reduce the complexity of iteration and decoding, but also avoids the traditional weighted bit-flipping decoding algorithm (WBF). Excessive effects of code performance.

In this paper, a modified weighted bit-flipping (WBF) algorithm is proposed for finite geometry low-density parity-check (FG-LDPC) codes. The calculation for the flipping function in the new method includes all the elements in sum product algorithm (SPA) instead of the minimum one in most existing methods. Simulation results show that the proposed method exhibits better performance than the best method available in the literature so far. The performances of different algorithms are also considered in random constructed LDPC codes. The reliability ratio based WBF (RRWBF) method performs the best in this kind of codes and the proposed method performs very closely to the RRWBF method. The decoding complexities for both FG-LDPC and random constructed LDPC are also analyzed.