Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Embedded Systems Letters

High-Speed Architecture for Successive Cancellation Decoder With Split-g Node Block

Sujanth Roy James, G. Lakshminarayanan, Seok‐Bum Ko

Published Sep 2, 2020• 8 citations
Publisher

Abstract

Polar codes are one of the recently developed error correcting codes, and they are popular due to their capacity achieving nature. The architecture of the successive cancellation (SC) decoder algorithm is composed of a recursive processing element (PE). The PE comprises various blocks that include signed adder, subtractor, comparator, multiplexers, and few logic gates. Therefore, the latency of the PE is a primary concern. Hence, a high-speed architecture for implementing the SC decoding algorithm for polar codes is proposed. In the proposed work, a novel restructuring of the 2bit-SC (2b-SC) precomputation decoder architecture is carried out to reduce the latency by 20% while reducing the hardware complexity. Compared to the 2b-SC precomputation decoder, the proposed architecture also has 19% increased throughput for (1024, 512) polar codes with 45% reduction in the gate count.

DOI
10.1109/les.2020.3021144

Related papers

Low-Latency Successive-Cancellation List Decoders for Polar Codes With Multibit Decision

Bo Yuan, Keshab K. Parhi

Polar codes, as the first provable capacity-achieving error-correcting codes, have received much attention in recent years. However, the decoding performance of polar codes with traditional successive-cancellation (SC) algorithm cannot match that of the low-density parity-check or Turbo codes. Because SC list (SCL) decoding algorithm can significantly improve the error-correcting performance of polar codes, design of SCL decoders is important for polar codes to be deployed in practical applications. However, because the prior latency reduction approaches for SC decoders are not applicable for SCL decoders, these list decoders suffer from the long-latency bottleneck. In this paper, we propose a multibit-decision approach that can significantly reduce latency of SCL decoders. First, we present a reformulated SCL algorithm that can perform intermediate decoding of 2 b together. The proposed approach, referred as 2-bit reformulated SCL (2b-rSCL) algorithm, can reduce the latency of SCL decoder from (3n-2) to (2n-2) clock cycles without any performance loss. Then, we extend the idea of 2-b-decision to general case, and propose a general decoding scheme that can perform intermediate decoding of any 2Kbits simultaneously. This general approach, referred as 2K-bit reformulated SCL (2Kb-rSCL) algorithm, can reduce the overall decoding latency to as short as n/2K-2-2 cycles. Furthermore, on the basis of the proposed algorithms, very large-scale integration architectures for 2b-rSCL and 4b-rSCL decoders are synthesized. Compared with a prior SCL decoder, the proposed (1024, 512) 2b-rSCL and 4b-rSCL decoders can achieve 21% and 60% reduction in latency, 1.66 and 2.77 times increase in coded throughput with list size 2, and 2.11 and 3.23 times increase in coded throughput with list size 4, respectively.

arXiv:1406.7036•IEEE Transactions on Very Large Scale Integration (VLSI) Systems•Jan 19, 2015•119 citations

Hardware And Latency Efficient Architecture for Successive Cancellation List Decoding of Polar Codes

M Lakshmi, Narayanan G Lakshmi

In order to achieve a magnificent error-correcting performance Successive Cancellation List (SCL) decoding is a powerful and excellent method which considers L decoding paths at each decoding stage concurrently. However, the conventional SCL decoder uses L copies of Successive Cancellation (SC) decoder for a list size of L thereby resulting in a massive increase in the hardware as the list size increases which is one of the major drawbacks of SCL decoder. One more drawback of SCL decoder architecture is the long latency of the architecture. Using the proposed efficient utilization of existing hardware architecture, there is a reduction in the number of Merged Processing Elements (MPE) by 39% for a list size of 2 and 45% for a list size of 4 when compared to the existing architectures and a vast reduction compared to conventional SCL decoder. The partial pipelining considered in this work can reduce the latency compared to conventional SCL multi-bit architecture to a greater extent.

TEQIP III Sponsored International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW)•May 1, 2019•1 citation

Effectively Partitioned Implementation for Successive-Cancellation Polar Decoder

Yuta Ideguchi, Norifumi Kamiya, Masashi Tawada +1 more

This paper proposes an effective field-programmable gate array (FPGA) implementation of a successive-cancellation (SC) decoder for polar codes that have recently attracted attention as error-correcting codes adopted for 5G wireless systems. We focus on effective ways of partitioning the SC decoding procedure into combinational and sequential logic parts. It can be shown that the SC decoder of length N(= N1N2) can be divided into two parts: N1SC decoders of length N2and a single SC decoder of length N1. While the N1decoders in the first part can perform in parallel, the decoding procedure in the second part is performed sequentially, which causes a bottleneck due to a long latency. We present an SC decoder architecture in which the first part is implemented using sequential logic circuits, and the second part is implemented using only combinational logic circuits. The overall latency and clock frequency of the decoder are balanced by the divisor N1of N, and we show that an appropriate choice of N1yields an efficient implementation with a high throughput. We demonstrate an FPGA implementation of the decoder architecture for a 1024-bit-length polar code and show that our FPGA decoder can achieve three times higher throughput than the conventional sequential semi-parallel decoder without significantly increasing the hardware resources.

IEEE International Midwest Symposium on Circuits and Systems (MWSCAS)•Aug 1, 2019•2 citations

Adaptive Successive Cancellation Priority Decoder for 5G Polar Codes

Wenqing Song, Yifei Shen, Yuxiang Fu +2 more

As two common successive cancellation (SC)-based decoding algorithms of polar codes, the SC list (SCL) and SC stack (SCS) decoder can achieve satisfactory error correction performance, especially with increased list size or stack depth. Nevertheless, a large list size or stack depth will lead to high computational complexities and hardware resources. To this end, successive cancellation priority (SCP) decoding with priority- first searching strategy and trellis-like storage is proposed to offer one solution. In this paper, an efficient SCP decoder is first proposed to verify its advantages over SCL and SCS decoders. Furthermore, an adaptive node-inserting scheme is proposed to reduce the number of bits insert into the priority queue. Numerical results have shown that for the polar code with transmission length 1024 and rate 1/2, the proposed adaptive SCP (ASCP) decoder can achieve significant time complexity reduction on average compared with the standard SCL decoder. The hardware architecture of SCP decoding is implemented using 65-nm CMOS technology and the results show better throughput compared with the SCS decoder.

IEEE International Symposium on Circuits and Systems proceedings•Apr 27, 2021•4 citations

Successive cancellation decoder for very long polar codes

Bertrand Le Gal, Camille Leroux, Christophe Jégo

Polar codes are a family of error correcting codes that achieves the symmetric capacity of memoryless channels when the code length N tends to infinity. However, moderate code lengths are required in most of wireless digital applications to limit the decoding latency. In some other applications, such as optical communications or quantum key distribution, the latency introduced by very long codes is not an issue. The main challenge is to design codes with the best error correction capability, a tractable complexity and a high throughput. In such a context, SC decoding is an interesting solution because its performance improves with N while the computational complexity scales almost linearly. In this paper, we propose to improve the scalability of SC decoders thanks to four architectural optimizations. The resulting SC decoder is implemented on an FPGA device and favorably compares with state-of-the-art scalable SC decoders. Moreover, a 222polar code SC decoder is implemented on a Stratix-5 FPGA. This code length is twice larger than the ones achieved in previous works. To the best of our knowledge, this is the first architecture for which a N = 4 million bits polar code can be actually decoded on a reconfigurable circuit.

SiPS ... design and implementation - IEEE Workshop on Signal Processing Systems•Oct 1, 2017•3 citations

Fast Successive-Cancellation Decoding of 2 × 2 Kernel Non-Binary Polar Codes

Ali Farsiabi, Hamid Ebrahimzad, Masoud Ardakani +1 more

Non-binary polar codes (NBPCs) decoded by successive cancellation (SC) algorithm have remarkable bit-error-rate performance compared to the binary polar codes (BPCs). Due to its serial nature, SC decoding suffers from long latency. The latency issue in BPCs has been the topic of extensive research and it has been notably resolved by the introduction of fast SC-based decoders. However, the latency problem of NBPCs is mainly untouched and the vast majority of research on NBPCs is devoted to issues concerning design and efficient implementation. In this paper, we propose fast SC decoding for NBPCs constructed based on$2\times 2$kernels. In particular, we extend the special nodes of BPCs to their non-binary counterpart and define various non-binary special nodes in the SC decoding tree of NBPCs and propose their fast decoding. This way, we avoid traversing the full decoding tree and significantly reduce the decoding delay compared to symbol-by-symbol SC decoding. We also propose a simplified NBPC structure that facilitates the procedure of non-binary fast SC decoding. Using our proposed fast non-binary decoder, we observe an improvement of more than 96% in latency concerning the original SC decoding. This is while our proposed fast SC decoder for NBPCs incurs no error-rate loss.

IEEE Transactions on Communications•Aug 26, 2024•5 citations
Polar codes are one of the recently developed error correcting codes, and they are popular due to their capacity achieving nature. The architecture of the successive cancellation (SC) decoder algorithm is composed of a recursive processing element (PE). The PE comprises various blocks that include signed adder, subtractor, comparator, multiplexers, and few logic gates. Therefore, the latency of the PE is a primary concern. Hence, a high-speed architecture for implementing the SC decoding algorithm for polar codes is proposed. In the proposed work, a novel restructuring of the 2bit-SC (2b-SC) precomputation decoder architecture is carried out to reduce the latency by 20% while reducing the hardware complexity. Compared to the 2b-SC precomputation decoder, the proposed architecture also has 19% increased throughput for (1024, 512) polar codes with 45% reduction in the gate count.
Polar codes, as the first provable capacity-achieving error-correcting codes, have received much attention in recent years. However, the decoding performance of polar codes with traditional successive-cancellation (SC) algorithm cannot match that of the low-density parity-check or Turbo codes. Because SC list (SCL) decoding algorithm can significantly improve the error-correcting performance of polar codes, design of SCL decoders is important for polar codes to be deployed in practical applications. However, because the prior latency reduction approaches for SC decoders are not applicable for SCL decoders, these list decoders suffer from the long-latency bottleneck. In this paper, we propose a multibit-decision approach that can significantly reduce latency of SCL decoders. First, we present a reformulated SCL algorithm that can perform intermediate decoding of 2 b together. The proposed approach, referred as 2-bit reformulated SCL (2b-rSCL) algorithm, can reduce the latency of SCL decoder from (3n-2) to (2n-2) clock cycles without any performance loss. Then, we extend the idea of 2-b-decision to general case, and propose a general decoding scheme that can perform intermediate decoding of any 2Kbits simultaneously. This general approach, referred as 2K-bit reformulated SCL (2Kb-rSCL) algorithm, can reduce the overall decoding latency to as short as n/2K-2-2 cycles. Furthermore, on the basis of the proposed algorithms, very large-scale integration architectures for 2b-rSCL and 4b-rSCL decoders are synthesized. Compared with a prior SCL decoder, the proposed (1024, 512) 2b-rSCL and 4b-rSCL decoders can achieve 21% and 60% reduction in latency, 1.66 and 2.77 times increase in coded throughput with list size 2, and 2.11 and 3.23 times increase in coded throughput with list size 4, respectively.
In order to achieve a magnificent error-correcting performance Successive Cancellation List (SCL) decoding is a powerful and excellent method which considers L decoding paths at each decoding stage concurrently. However, the conventional SCL decoder uses L copies of Successive Cancellation (SC) decoder for a list size of L thereby resulting in a massive increase in the hardware as the list size increases which is one of the major drawbacks of SCL decoder. One more drawback of SCL decoder architecture is the long latency of the architecture. Using the proposed efficient utilization of existing hardware architecture, there is a reduction in the number of Merged Processing Elements (MPE) by 39% for a list size of 2 and 45% for a list size of 4 when compared to the existing architectures and a vast reduction compared to conventional SCL decoder. The partial pipelining considered in this work can reduce the latency compared to conventional SCL multi-bit architecture to a greater extent.
This paper proposes an effective field-programmable gate array (FPGA) implementation of a successive-cancellation (SC) decoder for polar codes that have recently attracted attention as error-correcting codes adopted for 5G wireless systems. We focus on effective ways of partitioning the SC decoding procedure into combinational and sequential logic parts. It can be shown that the SC decoder of length N(= N1N2) can be divided into two parts: N1SC decoders of length N2and a single SC decoder of length N1. While the N1decoders in the first part can perform in parallel, the decoding procedure in the second part is performed sequentially, which causes a bottleneck due to a long latency. We present an SC decoder architecture in which the first part is implemented using sequential logic circuits, and the second part is implemented using only combinational logic circuits. The overall latency and clock frequency of the decoder are balanced by the divisor N1of N, and we show that an appropriate choice of N1yields an efficient implementation with a high throughput. We demonstrate an FPGA implementation of the decoder architecture for a 1024-bit-length polar code and show that our FPGA decoder can achieve three times higher throughput than the conventional sequential semi-parallel decoder without significantly increasing the hardware resources.
As two common successive cancellation (SC)-based decoding algorithms of polar codes, the SC list (SCL) and SC stack (SCS) decoder can achieve satisfactory error correction performance, especially with increased list size or stack depth. Nevertheless, a large list size or stack depth will lead to high computational complexities and hardware resources. To this end, successive cancellation priority (SCP) decoding with priority- first searching strategy and trellis-like storage is proposed to offer one solution. In this paper, an efficient SCP decoder is first proposed to verify its advantages over SCL and SCS decoders. Furthermore, an adaptive node-inserting scheme is proposed to reduce the number of bits insert into the priority queue. Numerical results have shown that for the polar code with transmission length 1024 and rate 1/2, the proposed adaptive SCP (ASCP) decoder can achieve significant time complexity reduction on average compared with the standard SCL decoder. The hardware architecture of SCP decoding is implemented using 65-nm CMOS technology and the results show better throughput compared with the SCS decoder.
Polar codes are a family of error correcting codes that achieves the symmetric capacity of memoryless channels when the code length N tends to infinity. However, moderate code lengths are required in most of wireless digital applications to limit the decoding latency. In some other applications, such as optical communications or quantum key distribution, the latency introduced by very long codes is not an issue. The main challenge is to design codes with the best error correction capability, a tractable complexity and a high throughput. In such a context, SC decoding is an interesting solution because its performance improves with N while the computational complexity scales almost linearly. In this paper, we propose to improve the scalability of SC decoders thanks to four architectural optimizations. The resulting SC decoder is implemented on an FPGA device and favorably compares with state-of-the-art scalable SC decoders. Moreover, a 222polar code SC decoder is implemented on a Stratix-5 FPGA. This code length is twice larger than the ones achieved in previous works. To the best of our knowledge, this is the first architecture for which a N = 4 million bits polar code can be actually decoded on a reconfigurable circuit.
Non-binary polar codes (NBPCs) decoded by successive cancellation (SC) algorithm have remarkable bit-error-rate performance compared to the binary polar codes (BPCs). Due to its serial nature, SC decoding suffers from long latency. The latency issue in BPCs has been the topic of extensive research and it has been notably resolved by the introduction of fast SC-based decoders. However, the latency problem of NBPCs is mainly untouched and the vast majority of research on NBPCs is devoted to issues concerning design and efficient implementation. In this paper, we propose fast SC decoding for NBPCs constructed based on2×22\times 22×2kernels. In particular, we extend the special nodes of BPCs to their non-binary counterpart and define various non-binary special nodes in the SC decoding tree of NBPCs and propose their fast decoding. This way, we avoid traversing the full decoding tree and significantly reduce the decoding delay compared to symbol-by-symbol SC decoding. We also propose a simplified NBPC structure that facilitates the procedure of non-binary fast SC decoding. Using our proposed fast non-binary decoder, we observe an improvement of more than 96% in latency concerning the original SC decoding. This is while our proposed fast SC decoder for NBPCs incurs no error-rate loss.