As a combination of laser technology and modern photoelectric detection technology, lidar (laser radar) has notable advantages compared with traditional radar such as high resolution, strong anti-interference ability, and good low-altitude detection performance. However, with continuous application in aerospace, military, artificial intelligence and other fields, lidar has reached the limits of classical physics and can’t meet the requirements in detection, measurement and imaging. In order to break the bottleneck, worldwide researchers have developed a new type of radar-quantum lidar, which is based on the combination of traditional radar technology and quantum information technology. Its main principle is to get imaging through squeezed light that is below the noise limit of classical physics and then manipulated by the quantum state to achieve imaging with higher quality. Quantum lidar in the paper injects quantum squeezed light to receiver end and uses quantum phase-sensitive amplifier technology to compensate the photon loss that caused by insufficient quantum power to further improve resolution. In the squeezed light, the generation of quantum squeezed light and detection theory are studied, the resonant cavity locking principle and balanced homodyne detection principle are analyzed, and a mode cleaner with narrow line width is designed to improve beam transverse mode quality of laser and filter high frequency noise. In order to reduce quantum noise and improve resolution, quantum lidar imaging system is developed and the theoretically derivation and numerical simulation results show that the resolution of quantum lidar imaging is 1.71 times higher than that of lidar imaging.
As a combination of laser technology and modern photoelectric detection technology, lidar (laser radar) has notable advantages compared with traditional radar such as high resolution, strong anti-interference ability, and good low-altitude detection performance. However, with continuous application in aerospace, military, artificial intelligence and other fields, lidar has reached the limits of classical physics and can’t meet the requirements in detection, measurement and imaging. In order to break the bottleneck, worldwide researchers have developed a new type of radar-quantum lidar, which is based on the combination of traditional radar technology and quantum information technology. Its main principle is to get imaging through squeezed light that is below the noise limit of classical physics and then manipulated by the quantum state to achieve imaging with higher quality. Quantum lidar in the paper injects quantum squeezed light to receiver end and uses quantum phase-sensitive amplifier technology to compensate the photon loss that caused by insufficient quantum power to further improve resolution. In the squeezed light, the generation of quantum squeezed light and detection theory are studied, the resonant cavity locking principle and balanced homodyne detection principle are analyzed, and a mode cleaner with narrow line width is designed to improve beam transverse mode quality of laser and filter high frequency noise. In order to reduce quantum noise and improve resolution, quantum lidar imaging system is developed and the theoretically derivation and numerical simulation results show that the resolution of quantum lidar imaging is 1.71 times higher than that of lidar imaging.
Lidar (laser radar) offers advantages over conventional radar in terms of higher resolution, greater anti-interference capability and ultra-low altitude detection performance. However, Lidar has now reached a bottleneck in terms of detection range and is no longer able to correctly identify targets beyond 500 meters, thus failing to meet the requirements for detection, measurement and imaging. To break this bottleneck, we have developed a Quantum Lidar with a detection range of up to one kilometre, which is based on a quantum vacuum squeezed laser and can compress the photon fluctuation by 5.6dB in the vacuum state through quasi-phase matching in non-linear crystals, reducing the quantum noise of laser which accounts for 73% of the lidar, thus reducing the overall noise of the quantum lidar by 3.27dB and improves the phase stability of the laser (from 10 minutes to more than 120 minutes) to achieve higher accuracy measurements, with a Signal-Noise Ratio (SNR) twice that of conventional lidar, and therefore a sensitivity twice as high. The basic technical implementation is to use a 20W power 1064nm wavelength continuous wave laser (CW, M2 less than or equal to 1.05) to irradiate a target located one kilometre away. By detecting a very weak reflected laser (power=10μW ± 5μW) which is exponentially attenuated by distance, We use noiseless amplification by a quantum vacuum-squeezed laser with the same power magnitude to obtain a higher power (7dB amplification) and higher signal-noise ratio (4.77dB SNR improvement). A reflective lens set (250mm aperture) of our design is used to receive the laser diffusion due to the 4mrad transmission angle of one kilometre. In the squeezed laser system, the resonant cavity locking efficiency is improved to 99.7%, and the re-locking time is less than 0.3s, it is directly switchable with the balance homodyne detection system. The mode cleaner improves the transverse mode quality(the mode bandwidth is reduced by 67%) while filtering high-frequency noise. The quantum lidar imaging system has been developed, and the experimental results show that the resolution of the laboratory-simulated long-range decay experiment is 3 times higher than that of traditional lidar is a promising development. This means that the system can detect and image smaller objects and features with greater accuracy and precision. The use of a self-developed quantum enhancement algorithm to obtain a 5 times higher contrast lidar image is also a significant improvement, and the use of a quantum denoising algorithm to reduce graphic distortion and image scatter caused by atmospheric pollution and environmental interference is a critical development. These issues can significantly degrade the quality of lidar images, so being able to mitigate their effects is a significant step forward. Through a self-developed LiDAR 3D reconstruction algorithm, the reconstruction efficiency is increased by 3 times and the resolution is increased by 2.5 times, which means that the reconstructed 3D model is faster, more detailed and accurate. In the future, based on one kilometre's work, achieving a quantum lidar with a detection distance of 10, 20 or even 50 kilometres with much clearer images would require advancements by steadily improving the resolution, improving the signal-noise ratio of the system, improving the laser power and optimising the algorithm.
High resolution, high signal-to-noise ratio and high sensitivity have always been the goals and technical bottlenecks of detection, precision measurement and imaging. Quantum detection technology is one of the disruptive cutting-edge technologies in the world. Quantum information technology is introduced into the field of classical detection, hoping to solve the difficult technical bottleneck on the basis of classical physics. Compared with traditional detection methods, quantum detection has higher sensitivity, can receive weaker signals, requires lower transmission power, and has stronger anti-interference ability. In terms of precision measurement, the characteristics of quantum mechanics are used to make the measurement accuracy break through the classical physical limit, and then improve the measurement accuracy of the detection system. But with the development of remote sensing technology and people demand for long distance detection, we completed in the early completed close quantum detection, combined with remote sensing technology, the quantum squeezed light into the receiving system, using quantum phase-free amplification technology, make up for the low efficiency of the detector, make its imaging results close to the ideal detector. We designed a set of quantum squeezing light preparation, emission /receiving system, quantum enhancement module, quantum imaging system, balance homodyne detection system, data processing system, central control system in one of the remote quantum infrared detector, effective detection distance up to 100 meters, at the same time achieve high resolution imaging, the same environment and classical laser imaging resolution increased by 1 to2 times. In March 2000, Professor Siwen Bi conducted the exploration and research on quantum remote sensing. At the beginning of 2001, Professor Siwen Bi first put forward the concept of quantum remote sensing at home and abroad. In the past 20 years, through three stages of basic theoretical scientific experiments and key technologies, we have overcome many difficulties in theoretical research scientific experiments and key technologies ,and achieved breakthrough progress and innovative results, which have laid a key foundation for the follow-up quantum laser radar quantum remote sensing products.
The entangled quantum radar applies the quantum information technology to the radar sensing network and detection system. The dynamic particle changes and optical attenuation caused by complex atmospheric environments will severely limit the traditional radar performance. Due to entanglement characteristics, the entangled optical quantum radar has better anti-stealth interference ability, stronger anti-turbulence properties, and higher spatial resolution which makes it promising in complex and high-attenuation environments. In addition, quantum radar based on the entangled light source can overcome the limitations of low imaging resolution and low confidentiality in traditional target detection. Therefore, high-precision positioning and high-resolution imaging are the research focus of the quantum radar sensing network. Based on this, we first design and optimize an optical path structure of the quantum entangled light source to obtain higher brightness entangled source which is suitable for complex atmospheric environments. Second, in response to the problem of low positioning accuracy in the traditional quantum radar, we design a new positioning optical path and propose a novel entangled optical quantum positioning method based on the photon scattering model. Third, to address the problems of low resolution and slow speed in traditional quantum radar imaging, we propose a new entangled light quantum imaging method based on two-phase coincidence counting. Finally, we conduct extensive experiments to evaluate the effectiveness of the proposed method in complex atmospheric environments and further provide possibilities for the entangled light source quantum radar sensing network.
Though the measurement precision of the traditional LiDAR is gradually increased, it is still limited by the quantum noise of the optical field and the extra noise introduced by the detection process. To improve the detection performance of LiDAR, a new scheme using quantum squeezed state light field as local oscillator of LiDAR was proposed and the key factors for improving the detection precision of LiDAR was analyzed. Then an integrated low-noise squeezed light field was prepared, and the experiment of LiDAR Doppler information measurement was carried out. The results show that the Doppler information detection sensitivity by using quantum squeezed state is 3 dB higher than the traditional scheme of the coherent state light field as the local oscillator, which paves a research path for the detection of weak signals such as Doppler information.
In classical physics, the detection of any physical quantity is accompanied by noise, including the classical noise of the system and quantum noise, which limits the detection accuracy. Among them, the classical noise mainly comes from technical defects, the advantages and disadvantages of instruments and other factors. With the development of science and technology, the classical noise of the system is greatly reduced and can often be ignored. Therefore, quantum noise determined by quantum mechanical properties gradually becomes the main source of noise. The squeezed light source has the quantum property that a certain orthogonal component can be lower than the shot noise limit, which breaks through the standard quantum noise limit and further improves the detection accuracy. As a kind of non-classical light, the squeezed state has great application potential in the field of quantum optics. Based on the stable working squeezed light prepared in the early stage, and combining with the theory, experiment and key technology of Professor Bi over 20 years, we have developed a set of instrumentized short-range quantum infrared detector. Special design is made in light source, detection system, pattern matching, phase locking, structure design and packaging, which can effectively improve detection accuracy and imaging quality in the range of 0.5m-9m, and then used in light source correction such as transverse displacement and tilt measurement of light beam and various detection under special conditions such as weak light.
Light Detection and Ranging (LiDAR) has emerged as a pivotal sensor across diverse domains such as autonomous driving, mapping, and remote sensing, owing to its exceptional orientation capabilities and high resolution. The detection mechanism of LiDAR is fundamentally categorized into non-coherent detection and coherent detection. Non-coherent detection employs the direct detection method, which involves measuring changes in the intensity of the reflected light signal to achieve detection. Pulse LiDAR, which determines the target range through pulsed time-of-flight measurements, falls within this classification. On the other hand, coherent detection employs heterodyne detection techniques and achieves detection by measuring the frequency or phase difference between the echo signal and the local oscillator signal. This approach is utilized in frequency modulation continuous wave (FMCW) LiDAR and Doppler speed LiDAR. LiDAR systems employing coherent detection methods can attain heightened sensitivity while operating at lower transmission power levels. However, due to the limitations posed by quantum noise, conventional LiDAR systems have encountered challenges in terms of detection sensitivity and resolution, prompting the need for advancement. In recent times, spurred by the emergence of quantum metrology, a quantum version of LiDAR has been conceptualized, promising superior precision and resolution. Leveraging the enhanced signal-to-noise ratio made possible by quantum advancements, quantum LiDAR demonstrates the potential to extend detection ranges, elevate detection accuracy, bolster anti-jamming capabilities, and enhance anti-stealth performance beyond that of classical LiDAR, all while operating at equivalent transmission signal power levels. As an emerging technology, quantum LiDAR is currently in its exploratory phase, and several challenges must be confronted prior to its practical implementation. These challenges encompass a restricted array of methods for the effective generation of quantum light sources, the vulnerability of quantum states to environmental factors, resulting in their deterioration, the constrained techniques for modulating quantum light sources, and the critical necessity to augment detector sensitivity. Furthermore, present quantum LiDAR efforts primarily concentrate on imaging and ranging capabilities, with limited research dedicated to simultaneous velocity measurement and ranging. Hence, forthcoming investigations into quantum LiDAR will center around optimizing quantum light source efficiency, exploring high-dimensional modulation techniques, and advancing high-sensitivity detectors. These efforts aim to enhance system stability and enable miniaturization, ultimately leading to superior target detection performance. This review centers on the evaluation of ranging and velocity measurement performance within quantum LiDAR systems. Following a concise introduction to two renowned categories of classical LiDAR—namely, pulse LiDAR and FMCW LiDAR, the paper delves into the progress made in quantum pulsed LiDAR and quantum interferometric LiDAR. In particular, this review highlights the advancements in quantum FMCW LiDAR, a system proposed for achieving simultaneous range and velocity measurements with quantum enhancement. By conducting a thorough assessment of the current accomplishments in quantum LiDAR research, the study seeks to attain a more profound comprehension of prevailing research focal points and obstacles, thus offering invaluable insights to steer its prospective advancement.