Theory of cavityless microwave SQUIDs

I. E. Arsaev, M. V. Butrov, V. I. Tokatly

Constantin Schuster, Mathias Wegner, C. Enss +1 more

We present a hybrid microwave superconducting quantum interference device (SQUID) multiplexer that combines two frequency-division multiplexing techniques to allow multiplexing a given number of cryogenic detectors with only a fraction of frequency encoding resonators. Similar to conventional microwave SQUID multiplexing, our multiplexer relies on inductively coupling non-hysteretic, unshunted rf-SQUIDs to superconducting microwave resonators as well as applying flux ramp modulation for output signal linearization. However, instead of utilizing one resonator per SQUID, we couple multiple SQUIDs to a common readout resonator and encode the SQUID input signals in sidebands of the microwave carrier by varying the flux ramp modulation frequency for each SQUID. We prove the suitability of our approach using a prototype device and argue by means of fundamental information theory that our approach is particularly suited for reading out large cryogenic bolometer arrays.

John A. B. Mates, K. D. Irwin, Leila R. Vale +3 more

Ida-Maria Svensson

In this thesis I present different types of manipulations of microwave fields using tunable superconducting resonators. A resonator is made tunable by adding one or more superconducting quantum interference devices, SQUIDs. The SQUID consists of a superconducting loop with two Josephson junctions and acts as a tunable nonlinear inductor. Modulation of the SQUID nonlinearity can be performed to induce different types of non-trivial oscillator dynamics. The first project I present is on subharmonic oscillations. Here, the SQUID in a tunable resonator is driven with an external signal at an integer multiple of the frequency w. When w is placed slightly below the first resonator mode, I show generation of radiation at w, which is known as frequency down-conversion. In my measurements, subharmonic oscillations have been detected from period doubling up to period quintupling. For the specific case of period tripling, theory is developed and I show good agreement between theory and experiments. The second project of the thesis is on a doubly tunable resonator. Here, I show creation of a superconducting resonator with two independently tunable boundary conditions. The idea with this system is to operate the resonator in a breathing or a translational mode and compare the two. For static dc magnetic flux the performance is very good. As a second step, I perform fast modulation of both SQUIDs to generate radiation. Even though some of the measurement results are promising, I also show some contradicting observations. These indicate that the actual modulation mechanism of the SQUID is not pumping of the magnetic flux in the SQUID loop as intended, but rather direct current driving of the SQUID. However, the system remains a promising idea for microwave manipulation and creation of interesting non-classical states. As a possible application of the doubly tunable resonator, I present a theory proposal on how to use it for measurements on relativistic effects. By using the tunability of the resonator boundary conditions, the resonator can simulate a space rocket and time dilation could be measured. However, due to the crosstalk problems in the doubly tunable resonator this experiment was never realized. Finally, I finish the thesis by presenting a design for a tunable microwave coupling. Papers E and F show a high on-off ratio for the coupler and demonstrate how it can be used for storage of microwave signals. Furthermore, the tunable coupler can be used to shape a microwave signal by tuning the strength of the coupling.

Boris Chesca

Yuki Nakashima, Fuminori Hirayama, Satoshi Kohjiro +4 more

We have succeeded in the first demonstration of a simple and accurate resonator-superconducting quantum interference device (SQUID) coupling for microwave SQUID multiplexers. A simple theory shows our direct coupling with adjustable fractional inductance in the SQUID loop can decrease the deviation of resonance frequencies from designed values in contrast to a conventional inductive coupling. Our direct coupling provides the individual coupling that can be optimized with keeping identical structure, shape, and dimension of the SQUID among all pixels on the same chip. It covers experimentally three or potentially more factors of a frequency band that is larger than that of cryogenic high electron mobility transistor amplifiers. The deviation of experimental fractional inductance from the designed one is less than −3/+10%.