Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Tunable superconducting resonators, subharmonic oscillations and manipulation of microwaves

Ida-Maria Svensson

Published Jan 1, 2018• 0 citations
OpenAlex

Abstract

In this thesis I present different types of manipulations of microwave fields using tunable superconducting resonators. A resonator is made tunable by adding one or more superconducting quantum interference devices, SQUIDs. The SQUID consists of a superconducting loop with two Josephson junctions and acts as a tunable nonlinear inductor. Modulation of the SQUID nonlinearity can be performed to induce different types of non-trivial oscillator dynamics. The first project I present is on subharmonic oscillations. Here, the SQUID in a tunable resonator is driven with an external signal at an integer multiple of the frequency w. When w is placed slightly below the first resonator mode, I show generation of radiation at w, which is known as frequency down-conversion. In my measurements, subharmonic oscillations have been detected from period doubling up to period quintupling. For the specific case of period tripling, theory is developed and I show good agreement between theory and experiments. The second project of the thesis is on a doubly tunable resonator. Here, I show creation of a superconducting resonator with two independently tunable boundary conditions. The idea with this system is to operate the resonator in a breathing or a translational mode and compare the two. For static dc magnetic flux the performance is very good. As a second step, I perform fast modulation of both SQUIDs to generate radiation. Even though some of the measurement results are promising, I also show some contradicting observations. These indicate that the actual modulation mechanism of the SQUID is not pumping of the magnetic flux in the SQUID loop as intended, but rather direct current driving of the SQUID. However, the system remains a promising idea for microwave manipulation and creation of interesting non-classical states. As a possible application of the doubly tunable resonator, I present a theory proposal on how to use it for measurements on relativistic effects. By using the tunability of the resonator boundary conditions, the resonator can simulate a space rocket and time dilation could be measured. However, due to the crosstalk problems in the doubly tunable resonator this experiment was never realized. Finally, I finish the thesis by presenting a design for a tunable microwave coupling. Papers E and F show a high on-off ratio for the coupler and demonstrate how it can be used for storage of microwave signals. Furthermore, the tunable coupler can be used to shape a microwave signal by tuning the strength of the coupling.

Related papers

Parametrically pumped superconducting circuits

Philip Krantz

In this licentiate thesis, I present the design, fabrication, and characterization of superconducting parametric resonators, for use in quantum information processing. These devices are quarter-wavelength coplanar waveguide resonators (~5 GHz), terminated at one end by a non-linear inductance provided by a SQUID (superconducting quantum interference device). The SQUID acts as a flux-controlled boundary condition, which effectively changes the electrical length of the resonator. This enables the modulation of the resonant frequency by coupling microwave magnetic flux into the SQUID, using on-chip transmission lines. The modulation occurs on a timescale much faster than the photon loss out of the resonator. The non-linearity provides several different regimes for operating this device. I focused on the parametric regime, in which the non-linear element was being modulated (pumped) at or near twice the resonant frequency. This pumping can lead to amplification and frequency conversion of an incoming signal. It can also give rise to instabilities and self-oscillations "parametric oscillations" - that is, the generation of an intense electric field in the resonator (the creation of photons). Parametric oscillations set in when the pumping strength exceeds a threshold value, and also depends on the pump-frequency detuning from twice the resonance and on the static flux through the SQUID. I characterized the devices over a wide parameter range by doing homodyne detection of the reflected signal or of the emitted field oscillations. In particular, I investigated the damping and two leading nonlinearities, dominating in different operating regimes, which influence the dynamics of the parametric resonator. First, I extracted the Duffing nonlinearity by studying the line width of the resonator as a function of the input signal (without pumping the SQUID). Second, with high pump amplitude, I extracted the pump-induced nonlinearity by determining the threshold parameters (pump amplitude and detuning) for the onset of parametric oscillations; this nonlinearity leads to the generation of higher-order pump terms that complicate the system dynamics, but can be mitigated now that they have been understood. My results validate a recent theoretical model for the classical, non-linear dynamics of parametric resonance, and helps determine workable design parameters. Finally, I helped develop a linearized model $-$ the "pumpistor" - describing this device in terms of a flux-controlled impedance. This will be useful when designing more complex circuits. One goal of this work is to demonstrate single-shot measurements on superconducting qubits (quantum bits of information). We will use the parametric resonator as a threshold discriminator, associating the qubit's two energy eigenstates with the parametric oscillations either turning on or not. This would be a very useful device in the quantum engineer's toolbox when designing systems for quantum information processing and communication.

•Jan 1, 2013•1 citation

Parametric interactions with signals and the vacuum

Michaël Simoen

In this thesis I present different experiments on superconducting circuits exploring parametric interactions with external signals and the vacuum in the microwave regime. These parametric processes are the result of the periodic modulation of a property of a system which results in different interactions. The systems used in this thesis are circuits where the nonlinear inductance of a superconducting quantum interference device (SQUID) is parametrically driven.I present the first experimental observation of the dynamical Casimir effect (DCE), since it was predicted in 1970. The DCE is an interaction between the vacuum and a periodically modulated boundary condition of the electromagnetic field, here implemented by a flux-tuned SQUID. In essence the modulated boundary will parametrically amplify the vacuum fluctuations which results in the pairwise generation of photons over a broad frequency range. I have characterized the system and measured the statistical properties of the emitted radiation to show that the radiation exhibits two-mode squeezing.Next, I present measurements on a superconducting multimode resonator containing a SQUID. I show that it is possible to get parametric amplification by driving the SQUID at either twice the frequency of one of the modes or by driving it at the sum of two mode frequencies. In both cases I show that it is possible to reach quantum-limited noise performance.In the same system I also demonstrate frequency conversion which occurs when the system is pumped at the difference frequency between two modes. Microwave photons are coherently transferred from one mode to the other. I show that the coupling strength depends linearly on the applied pump amplitude.The thesis also contains a linearized theoretical model to describe and analyze the flux-pumped SQUID. The model describes an equivalent circuit element called the pumpistor, with an impedance which depends on the pump phase. I show that under specific conditions the impedance becomes real and negative allowing pump power to be injected into the circuit, providing gain.Finally I also present a demonstration of an on-chip Mach-Zehnder interferometer. This experiment uses the tunability of the SQUID to provide a controllable phase shift in one of the interferometer arms. The transmission through the device can be modulated with a maximum change of 45 dB.

•Jan 1, 2015•4 citations

Microwave photon generation in a doubly tunable superconducting resonator

I-M. Svensson, M. Pierre, Michaël Simoen +7 more

We have created a doubly tunable resonator, with the intention to simulate relativistic motion of the resonator boundaries in real space. Our device is a superconducting coplanar-waveguide microwave resonator, with fundamental resonant frequency ω 1 / (2 π ) ~ 5 GHz. Both of its ends are terminated to ground via dc-SQUIDs, which serve as magnetic-flux-controlled inductances. Applying a flux to either SQUID allows the tuning of ω 1 / (2 π ) by approximately 700 MHz. Using two separate on-chip magnetic-flux lines, we modulate the SQUIDs with two tones of equal frequency, close to 2 ω 1 . We observe photon generation, at ω 1 , above a certain pump amplitude threshold. By varying the relative phase of the two pumps we are able to control this threshold, in good agreement with a theoretical model. At the same time, some of our observations deviate from the theoretical predictions, which we attribute to parasitic couplings resulting in current driving of the SQUIDs.

arXiv:1706.06821•Journal of Physics Conference Series•Mar 1, 2018•15 citations

Parametric Microwave Amplification using a Tunable Superconducting Resonator

C. W. Sandbo Chang

In this Master thesis, I present a theoretical description and experimental measurements of a tunable microwave resonator operated as a parametric amplifier. Superconducting parametric amplifiers have attracted great interest in recent years as it has been demonstrated that they can operate with a noise performance at the standard quantum limit. \nParametric amplification is achieved in the devices by modulating the electrical length of the resonator at twice the resonance frequency. The device measured in this thesis consists of a quarter-wavelength microwave resonator fabricated in a thin-film aluminum coplanar waveguide geometry. With a termination to ground through a Superconducting Quantum Interference Device (SQUID), the boundary condition of the resonator becomes sensitive to an applied magnetic field. This enables the tuning of the resonance frequencies, using a DC magnetic field, over a wide frequency range of 670MHz. Similarly, an AC magnetic field then allows for the modulation of the resonator electrical length at microwave frequencies. \nWe characterized the device by first measuring the DC tuning curves of the 2nd and 3rd harmonics of the resonator, around 4 GHz and 6 GHz respectively. We then studied parametric amplification in the device when the electrical length was modulated at approximately twice the resonance frequency of one of the modes. We scanned the pump frequency and pump power over a wide range to study the region in parameters which gives parametric gain. We performed an in-depth parameter sweep over this region, identifying pump parameters that provided maximum gain and maximum system noise improvements compared the following HEMT amplifier. \nWe find that the use of the parametric amplifier can improve the system noise temperature by more than 10 dB compared to a start-of-the-art commercial HEMT amplifier. This implies a performance near the standard quantum limit.

•Sep 2, 2015•0 citations

Tunable superconducting transmissionline resonator for qubit coupling

Martin Sandberg

In this licentiate thesis design, fabrication, and measurements of tunable superconducting microwave transmission line resonators are described. The resonators are of quarter wavelength type were the tuning is achieved by changing one of the boundary conditions of the resonator through a tunable impedance. As tunable impedance the Josephson inductance in form of SQUIDs is used. The Josephson inductance can then be tuned by applying a magnetic field to the SQUID loop. A tuning range of 750 MHz for a 5 GHz resonator is achieved, and as a figure of merit it can be tuned over 200 line widths. The purpose of the tunable resonators is to use them for dynamic coupling of superconducting quantum bits, this requires that the resonators can be tuned fast on the timescale of the resonator-qubit coupling. To measure tuning speeds faster then the ring up time of the resonators a method that measures the leakage of energy out of a detuned resonator was developed. With this method a frequency shift of the energy stored in the resonator can be measured. A detuning of 330 MHz in less than 10 ns is demonstrated for a 4.5 GHz resonator with a quality factor of 10$^4$. Working in the few photon limit indicates that the devices can be used to change the frequency of individual photons, this is however still to be demonstrated. As a part of this work the dressed states of a superconducting charge qubit was also studied.

•Jan 1, 2008•0 citations

Superconducting Microwave Resonators for Hybrid Quantum Systems in Extreme Conditions

Benedikt Wilde

Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.

•Mar 6, 2026•0 citations
In this thesis I present different types of manipulations of microwave fields using tunable superconducting resonators. A resonator is made tunable by adding one or more superconducting quantum interference devices, SQUIDs. The SQUID consists of a superconducting loop with two Josephson junctions and acts as a tunable nonlinear inductor. Modulation of the SQUID nonlinearity can be performed to induce different types of non-trivial oscillator dynamics. The first project I present is on subharmonic oscillations. Here, the SQUID in a tunable resonator is driven with an external signal at an integer multiple of the frequency w. When w is placed slightly below the first resonator mode, I show generation of radiation at w, which is known as frequency down-conversion. In my measurements, subharmonic oscillations have been detected from period doubling up to period quintupling. For the specific case of period tripling, theory is developed and I show good agreement between theory and experiments. The second project of the thesis is on a doubly tunable resonator. Here, I show creation of a superconducting resonator with two independently tunable boundary conditions. The idea with this system is to operate the resonator in a breathing or a translational mode and compare the two. For static dc magnetic flux the performance is very good. As a second step, I perform fast modulation of both SQUIDs to generate radiation. Even though some of the measurement results are promising, I also show some contradicting observations. These indicate that the actual modulation mechanism of the SQUID is not pumping of the magnetic flux in the SQUID loop as intended, but rather direct current driving of the SQUID. However, the system remains a promising idea for microwave manipulation and creation of interesting non-classical states. As a possible application of the doubly tunable resonator, I present a theory proposal on how to use it for measurements on relativistic effects. By using the tunability of the resonator boundary conditions, the resonator can simulate a space rocket and time dilation could be measured. However, due to the crosstalk problems in the doubly tunable resonator this experiment was never realized. Finally, I finish the thesis by presenting a design for a tunable microwave coupling. Papers E and F show a high on-off ratio for the coupler and demonstrate how it can be used for storage of microwave signals. Furthermore, the tunable coupler can be used to shape a microwave signal by tuning the strength of the coupling.
In this licentiate thesis, I present the design, fabrication, and characterization of superconducting parametric resonators, for use in quantum information processing. These devices are quarter-wavelength coplanar waveguide resonators (~5 GHz), terminated at one end by a non-linear inductance provided by a SQUID (superconducting quantum interference device). The SQUID acts as a flux-controlled boundary condition, which effectively changes the electrical length of the resonator. This enables the modulation of the resonant frequency by coupling microwave magnetic flux into the SQUID, using on-chip transmission lines. The modulation occurs on a timescale much faster than the photon loss out of the resonator. The non-linearity provides several different regimes for operating this device. I focused on the parametric regime, in which the non-linear element was being modulated (pumped) at or near twice the resonant frequency. This pumping can lead to amplification and frequency conversion of an incoming signal. It can also give rise to instabilities and self-oscillations "parametric oscillations" - that is, the generation of an intense electric field in the resonator (the creation of photons). Parametric oscillations set in when the pumping strength exceeds a threshold value, and also depends on the pump-frequency detuning from twice the resonance and on the static flux through the SQUID. I characterized the devices over a wide parameter range by doing homodyne detection of the reflected signal or of the emitted field oscillations. In particular, I investigated the damping and two leading nonlinearities, dominating in different operating regimes, which influence the dynamics of the parametric resonator. First, I extracted the Duffing nonlinearity by studying the line width of the resonator as a function of the input signal (without pumping the SQUID). Second, with high pump amplitude, I extracted the pump-induced nonlinearity by determining the threshold parameters (pump amplitude and detuning) for the onset of parametric oscillations; this nonlinearity leads to the generation of higher-order pump terms that complicate the system dynamics, but can be mitigated now that they have been understood. My results validate a recent theoretical model for the classical, non-linear dynamics of parametric resonance, and helps determine workable design parameters. Finally, I helped develop a linearized model −-− the "pumpistor" - describing this device in terms of a flux-controlled impedance. This will be useful when designing more complex circuits. One goal of this work is to demonstrate single-shot measurements on superconducting qubits (quantum bits of information). We will use the parametric resonator as a threshold discriminator, associating the qubit's two energy eigenstates with the parametric oscillations either turning on or not. This would be a very useful device in the quantum engineer's toolbox when designing systems for quantum information processing and communication.
In this thesis I present different experiments on superconducting circuits exploring parametric interactions with external signals and the vacuum in the microwave regime. These parametric processes are the result of the periodic modulation of a property of a system which results in different interactions. The systems used in this thesis are circuits where the nonlinear inductance of a superconducting quantum interference device (SQUID) is parametrically driven.I present the first experimental observation of the dynamical Casimir effect (DCE), since it was predicted in 1970. The DCE is an interaction between the vacuum and a periodically modulated boundary condition of the electromagnetic field, here implemented by a flux-tuned SQUID. In essence the modulated boundary will parametrically amplify the vacuum fluctuations which results in the pairwise generation of photons over a broad frequency range. I have characterized the system and measured the statistical properties of the emitted radiation to show that the radiation exhibits two-mode squeezing.Next, I present measurements on a superconducting multimode resonator containing a SQUID. I show that it is possible to get parametric amplification by driving the SQUID at either twice the frequency of one of the modes or by driving it at the sum of two mode frequencies. In both cases I show that it is possible to reach quantum-limited noise performance.In the same system I also demonstrate frequency conversion which occurs when the system is pumped at the difference frequency between two modes. Microwave photons are coherently transferred from one mode to the other. I show that the coupling strength depends linearly on the applied pump amplitude.The thesis also contains a linearized theoretical model to describe and analyze the flux-pumped SQUID. The model describes an equivalent circuit element called the pumpistor, with an impedance which depends on the pump phase. I show that under specific conditions the impedance becomes real and negative allowing pump power to be injected into the circuit, providing gain.Finally I also present a demonstration of an on-chip Mach-Zehnder interferometer. This experiment uses the tunability of the SQUID to provide a controllable phase shift in one of the interferometer arms. The transmission through the device can be modulated with a maximum change of 45 dB.
We have created a doubly tunable resonator, with the intention to simulate relativistic motion of the resonator boundaries in real space. Our device is a superconducting coplanar-waveguide microwave resonator, with fundamental resonant frequency ω 1 / (2 π ) ~ 5 GHz. Both of its ends are terminated to ground via dc-SQUIDs, which serve as magnetic-flux-controlled inductances. Applying a flux to either SQUID allows the tuning of ω 1 / (2 π ) by approximately 700 MHz. Using two separate on-chip magnetic-flux lines, we modulate the SQUIDs with two tones of equal frequency, close to 2 ω 1 . We observe photon generation, at ω 1 , above a certain pump amplitude threshold. By varying the relative phase of the two pumps we are able to control this threshold, in good agreement with a theoretical model. At the same time, some of our observations deviate from the theoretical predictions, which we attribute to parasitic couplings resulting in current driving of the SQUIDs.
In this Master thesis, I present a theoretical description and experimental measurements of a tunable microwave resonator operated as a parametric amplifier. Superconducting parametric amplifiers have attracted great interest in recent years as it has been demonstrated that they can operate with a noise performance at the standard quantum limit. \nParametric amplification is achieved in the devices by modulating the electrical length of the resonator at twice the resonance frequency. The device measured in this thesis consists of a quarter-wavelength microwave resonator fabricated in a thin-film aluminum coplanar waveguide geometry. With a termination to ground through a Superconducting Quantum Interference Device (SQUID), the boundary condition of the resonator becomes sensitive to an applied magnetic field. This enables the tuning of the resonance frequencies, using a DC magnetic field, over a wide frequency range of 670MHz. Similarly, an AC magnetic field then allows for the modulation of the resonator electrical length at microwave frequencies. \nWe characterized the device by first measuring the DC tuning curves of the 2nd and 3rd harmonics of the resonator, around 4 GHz and 6 GHz respectively. We then studied parametric amplification in the device when the electrical length was modulated at approximately twice the resonance frequency of one of the modes. We scanned the pump frequency and pump power over a wide range to study the region in parameters which gives parametric gain. We performed an in-depth parameter sweep over this region, identifying pump parameters that provided maximum gain and maximum system noise improvements compared the following HEMT amplifier. \nWe find that the use of the parametric amplifier can improve the system noise temperature by more than 10 dB compared to a start-of-the-art commercial HEMT amplifier. This implies a performance near the standard quantum limit.
In this licentiate thesis design, fabrication, and measurements of tunable superconducting microwave transmission line resonators are described. The resonators are of quarter wavelength type were the tuning is achieved by changing one of the boundary conditions of the resonator through a tunable impedance. As tunable impedance the Josephson inductance in form of SQUIDs is used. The Josephson inductance can then be tuned by applying a magnetic field to the SQUID loop. A tuning range of 750 MHz for a 5 GHz resonator is achieved, and as a figure of merit it can be tuned over 200 line widths. The purpose of the tunable resonators is to use them for dynamic coupling of superconducting quantum bits, this requires that the resonators can be tuned fast on the timescale of the resonator-qubit coupling. To measure tuning speeds faster then the ring up time of the resonators a method that measures the leakage of energy out of a detuned resonator was developed. With this method a frequency shift of the energy stored in the resonator can be measured. A detuning of 330 MHz in less than 10 ns is demonstrated for a 4.5 GHz resonator with a quality factor of 104^44. Working in the few photon limit indicates that the devices can be used to change the frequency of individual photons, this is however still to be demonstrated. As a part of this work the dressed states of a superconducting charge qubit was also studied.
Hybrid quantum systems play an essential role in efforts towards the advancements of quantum information technology and quantum sensing by bridging distinct technological platforms. In particular, hybrid systems comprising superconducting microwave circuits are being pursued intensely in light of existing achievements in superconducting qubits and precise quantum control in microwave circuits. Their realization relies on the design of superconducting resonators capable of coupling to an oscillatory mode of a second quantum system, facilitating the probing and manipulation of one via the other. In order to accommodate the coupled system, its particular constraints and requirements must be respected, which may be quite extreme from the perspective of established superconducting circuit design and operation. Overcoming this challenge has proved to be a substantial obstacle for the attainment of strongly coupled hybrid systems, despite spectacular advances in superconducting microwave circuits individually. In this work, we examine two approaches tackling this issue for different hybrid quantum systems, focusing on the optimization and characterization of the superconducting circuits. The first device aims at a superconductor-atom hybrid system through the coupling to Rydberg-Rydberg transitions in ultra-cold Rb-87 atoms trapped near the superconducting chip. Using simulations in conjunction with theoretical considerations, we demonstrate a comprehensive geometry parameter optimization procedure for maximum coupling rate. Presenting an experimental implementation of the resulting circuit, we validate its suitability for use under the intended operation conditions, including the option of tuning the electronic transition frequencies using a dc voltage. Secondly, we investigate a device designed for applications in large magnetic in-plane fields used to mediate coupling to integrated micromechanical oscillators; more specifically it is a flux-tunable SQUID resonator comprising Josephson nano-constrictions as nonlinear inductive components. Performing a thorough characterization of its frequency and Kerr anharmonicity tuning behavior at fields up to several hundred mT, we discover a pronounced asymmetry in its flux response at large fields. We show this asymmetry to be caused by the nano-constrictions turning into Josephson diodes, develop an intuitive macroscopic model for its field-induced emergence and reconstruct the diode current-phase relation from the flux tuning data. Several figures of merit informing the suitability of the SQUID resonators for optomechanical systems as well as other applications are improved by the diode effect, highlighting the potential of Josephson diodes in superconducting microwave circuits. Our results provide a promising stepping stone for the advancement of hybrid systems involving superconducting microwave circuits, putting new and exciting operation and coupling regimes within reach.