A significant consequence of the quantum nature of light in optical instruments is the presence of quantum noise in optical measurements. This noise limits the range of signals that can be used and signal-to-noise ratios that can be achieved. In addition, the performance of the system is different for very large signals, or modulations, and for small signals close to the quantum noise level. Some of the limitations introduced by quantum noise can be avoided by using non-classical, or squeezed, states of light. Technology has now advanced to the point where fundamental quantum effects such as the fluctuations of the vacuum field and the discreteness of light can be demonstrated in undergraduate teaching laboratories, and there are a growing number of applications for quantum light, in particular in precision metrology and applications ranging from large-scale gravitational-wave detectors to imaging and precision clocks.
A significant consequence of the quantum nature of light in optical instruments is the presence of quantum noise in optical measurements. This noise limits the range of signals that can be used and signal-to-noise ratios that can be achieved. In addition, the performance of the system is different for very large signals, or modulations, and for small signals close to the quantum noise level. Some of the limitations introduced by quantum noise can be avoided by using non-classical, or squeezed, states of light. Technology has now advanced to the point where fundamental quantum effects such as the fluctuations of the vacuum field and the discreteness of light can be demonstrated in undergraduate teaching laboratories, and there are a growing number of applications for quantum light, in particular in precision metrology and applications ranging from large-scale gravitational-wave detectors to imaging and precision clocks.
The first detections of gravitational waves have opened an exciting new field of astronomy. One of the most fundamental limitations for the sensitivity of current and future interferometric gravitational-wave detectors is imposed by the quantum nature of light: Quantum vacuum fluctuations entering the interferometer through the readout port will contribute to the detection noise, at high frequencies in the form of shot noise and at low frequencies by radiation pressure noise. A promising way to reduce this quantum noise is the injection of squeezed states of light that have a lower uncertainty in one quadrature than the vacuum state. The GEO 600 gravitational-wave detector demonstrated the use of squeezed light in 2010 and it is now the first detector to routinely apply squeezing to improve its sensitivity beyond the limits set by classical quantum shot noise. This thesis details the practical aspects of long-term stable and efficient squeezed-light integration in a large-scale gravitational-wave detector. Imperfections that can limit the amount of observable non-classical noise improvement, such as optical losses and phase fluctuations, were studied in detail and methods for their mitigation were developed. Novel control schemes for the active stabilisation of the squeezed light field's phase and alignment were one main focus of the investigations. At the same time, important experience was gathered in the operation of the squeezed light source over long timescales. Over the course of the thesis work, improvements were implemented that significantly increased the performance of the squeezed-light application. Squeezing was injected with an overall duty cycle of 88%, reaching a noise reduction of up to 4.4 dB, corresponding to a 40% lowered shot-noise level. This work has firmly established the practical application of squeezing as a mature technology. The gained knowledge will directly inform the implementation of squeezed light for all future gravitational-wave detectors.
This research focuses on advanced noise suppression technologies for high-precision measurement systems, particularly addressing the limitations of classical noise reducing approaches. The noise level of laser sources is a crucial factor that directly affects the measurement sensitivity in applications such as gravitational wave detection and biomedical imaging. Classical feedback control technologies are effective but often encounter a bottleneck resulting from the classical noise suppression limits. To cope with these challenges, a novel method integrating quantum squeezed light with classical feedback control systems to reduce intensity noise is proposed in this work. By employing an amplitude-squeezed light field, a quantum-enhanced feedback control model is developed, thereby theoretically examining the influence of both the feedback loop gain and the degree of squeezing on the noise suppression performance. The results show that the injection of squeezed light significantly reduces the intensity noise, approaching the shot noise limit (SNL), thereby improving the system sensitivity beyond the classical noise reduction boundaries. Specifically, –10 dB squeezed state injection into the feedback system yields an additional noise suppression of approximately 8.97 dB, exceeding what is achievable using classical feedback alone. This demonstrates that the potential of the proposed method can enhance measurement precision close to the quantum noise limits without increasing the laser power. The analysis highlights the asymmetric noise suppression effects between the inner feedback loop and outer feedback loop. Although the outer loop benefits significantly from the squeezed light injection and achieves noise levels that are unattainable by classical feedback methods, the inner loop shows relatively minor improvements. This asymmetry is attributed to the inherent characteristics of quantum squeezing and the limitations of the feedback loop design. Further investigation into the individual noise components reveals that the primary contributors to the intensity noise include input noise, photodetector noise, and beam splitter-induced vacuum fluctuations. The injection of squeezed light effectively mitigates these vacuum fluctuations, which are typically a major noise source in high-precision laser systems. Theoretical research results show that the use of squeezed light in feedback control systems can effectively enhance noise suppression, equivalent to a nine fold increase in detected optical power, without the physical drawbacks of increasing laser power such as thermal noise. In conclusion, this study provides a theoretical validation of combining quantum squeezed states with classical feedback control to exceed classical noise suppression limits. The integration of a –10 dB squeezed state demonstrates a significant noise reduction, showing that this hybrid approach could revolutionize noise management in precision measurement applications. The results pave the way for further exploring quantum-enhanced control technologies in fields such as gravitational wave detection, quantum communication, and advanced optical sensing, providing a pathway for improving sensitivity and noise suppression without increasing additional power requirements.
This introduction presents an overview of key concepts discussed in the subsequent chapters of this book. The book focuses on a classical model of light. It presents the properties of optical components and devices. The book provides a detailed description of lasers and amplifiers. It also presents a detailed discussion of photodetection for single photons and beams. The book explores the technical details required for reliable experimentation with quantum noise, including techniques such as cavity locking and feedback controller. It introduces the concept of squeezing is central to most attempts to improve optical devices beyond the quantum noise limit. The book describes the various squeezing experiments and discusses their results. It describes the applications of squeezed light with a detailed description of the largest application, the detection of gravitational waves. The book also discusses quantum non-demolition experiments.
The main theme of the conclusions drawn for classical communication systems operating at optical or higher frequencies is that there is a well‐understood performance gain in photon efficiency (bits/photon) and spectral efficiency (bits/s/Hz) by pursuing coherent‐state transmitters (classical ideal laser light) coupled with novel quantum receiver systems operating near the Holevo limit (e.g., joint detection receivers). However, recent research indicates that these receivers will require nonlinear and nonclassical optical processes and components at the receiver. Consequently, the implementation complexity of Holevo‐capacityapproaching receivers is not yet fully ascertained. Nonetheless, because the potential gain is significant (e.g., the projected photon efficiency and data rate of MIT Lincoln Laboratory's Lunar Lasercom Demonstration (LLCD) could be achieved with a factor‐of‐20 reduction in the modulation bandwidth requirement), focused research activities on ground‐receiver architectures that approach the Holevo limit in space‐communication links would be beneficial. The potential gains resulting from quantum‐enhanced sensing systems in space applications have not been laid out as concretely as some of the other areas addressed in our study. In particular, while the study period has produced several interesting high‐risk and high‐payoff avenues of research, more detailed seedlinglevel investigations are required to fully delineate the potential return relative to the state‐of‐the‐art. Two prominent examples are (1) improvements to pointing, acquisition and tracking systems (e.g., for optical communication systems) by way of quantum measurements, and (2) possible weak‐valued measurement techniques to attain high‐accuracy sensing systems for in situ or remote‐sensing instruments. While these concepts are technically sound and have very promising bench‐top demonstrations in a lab environment, they are not mature enough to realistically evaluate their performance in a space‐based application. Therefore, it is recommended that future work follow small focused efforts towards incorporating practical constraints imposed by a space environment. The space platform has been well recognized as a nearly ideal environment for some of the most precise tests of fundamental physics, and the ensuing potential of scientific advances enabled by quantum technologies is evident in our report. For example, an exciting concept that has emerged for gravity‐wave detection is that the intermediate frequency band spanning 0.01 to 10 Hz—which is inaccessible from the ground—could be accessed at unprecedented sensitivity with a space‐based interferometer that uses shorter arms relative to state‐of‐the‐art to keep the diffraction losses low, and employs frequency‐dependent squeezed light to surpass the standard quantum limit sensitivity. This offers the potential to open up a new window into the universe, revealing the behavior of compact astrophysical objects and pulsars. As another set of examples, research accomplishments in the atomic and optics fields in recent years have ushered in a number of novel clocks and sensors that can achieve unprecedented measurement precisions. These emerging technologies promise new possibilities in fundamental physics, examples of which are tests of relativistic gravity theory, universality of free fall, frame‐dragging precession, the gravitational inverse‐square law at micron scale, and new ways of gravitational wave detection with atomic inertial sensors. While the relevant technologies and their discovery potentials have been well demonstrated on the ground, there exists a large gap to space‐based systems. To bridge this gap and to advance fundamental‐physics exploration in space, focused investments that further mature promising technologies, such as space‐based atomic clocks and quantum sensors based on atom‐wave interferometers, are recommended. Bringing a group of experts from diverse technical backgrounds together in a productive interactive environment spurred some unanticipated innovative concepts. One promising concept is the possibility of utilizing a space‐based interferometer as a frequency reference for terrestrial precision measurements. Space‐based gravitational wave detectors depend on extraordinarily low noise in the separation between spacecraft, resulting in an ultra‐stable frequency reference that is several orders of magnitude better than the state of the art of frequency references using terrestrial technology. The next steps in developing this promising new concept are simulations and measurement of atmospheric effects that may limit performance due to non‐reciprocal phase fluctuations. In summary, this report covers a broad spectrum of possible new opportunities in space science, as well as enhancements in the performance of communication and sensing technologies, based on observing, manipulating and exploiting the quantum‐mechanical nature of our universe. In our study we identified a range of exciting new opportunities to capture the revolutionary capabilities resulting from quantum enhancements. We believe that pursuing these opportunities has the potential to positively impact the NASA mission in both the near term and in the long term. In this report we lay out the research and development paths that we believe are necessary to realize these opportunities and capitalize on the gains quantum technologies can offer.
Light has provided both fundamental phenomenology and enabling technology for scientific discovery for many years, and today it continues to play a central role in fundamental explorations and innovative applications. The ability to manipulate light beams and pulses with the quantum degrees of freedom of optical radiation will add to those advances. The future of quantum optics, which encompasses both the generation and manipulation of nonclassical radiation, as well as its interaction with matter, lies in the rich variety of quantum states that is now becoming feasible to prepare, together with the numerous applications in sensing, imaging, metrology, communications, and information processing that such states enable.