Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Effects of high pulse intensity and chirp in two-dimensional electronic spectroscopy

Marcel Binz, Lukas Bruder, Lipeng Chen, Maxim F. Gelin, Wolfgang Domcke, Frank Stienkemeier

Published Apr 28, 2020• 0 citations
OpenAlex

Abstract

The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.

Related papers

Effects of high pulse intensity and chirp in two-dimensional electronic spectroscopy of an atomic vapor

Marcel Binz, Lukas Bruder, Lipeng Chen +3 more

The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.

arXiv:2004.13366•Optics Express•Jun 6, 2020•23 citations

Effects of realistic pulse shapes in two-dimensional spectroscopy

M. Russo, R. Gilliot, A. Blech +3 more

Two-dimensional (2D) spectroscopy is a powerful pump-pump-probe technique for revealing couplings between quantum states and disentangling the different contributions to the optical response of a system. We present an efficient method for 2D spectroscopy simulations in the Markovian limit for the environment, capable of handling arbitrary pulse shapes and reproducing time-ordering and overlapping pulse effects, while maintaining a computational cost that scales linearly with the number of sampling points. We leverage this framework to investigate how 2D spectra are affected by spectral phase distortions and highly non-Gaussian pulse shapes, such as those produced experimentally by hollow-core fibers or non-collinear optical amplifiers. We show that realistic pulses can induce the appearance of additional spectral features, lineshape distortions and oscillating contributions in the system's dynamics. Notably, even weak temporal pulse tails arising from uncorrected high-order spectral phase terms cause visible changes in the 2D spectra. We also find that homodyne detection schemes employed in experiments can mitigate the presence of such pulse effects. These results emphasize the importance of including realistic pulses in 2D spectroscopy simulations to identify pulse-induced effects and minimize ambiguities in the interpretation of experimental data.

quant-pharXiv:2608.02275•Aug 4, 2026•0 citations

Pulse Propagation Effects in Optical 2D Fourier-Transform Spectroscopy: Theory

Austin P. Spencer, Hebin Li, Steven T. Cundiff +1 more

A solution to Maxwell's equations in the three-dimensional frequency domain is used to calculate rephasing two-dimensional Fourier transform (2DFT) spectra of the D2 line of atomic rubidium vapor in argon buffer gas. Experimental distortions from the spatial propagation of pulses through the sample are simulated in 2DFT spectra calculated for the homogeneous Bloch line shape model. Spectral features that appear at optical densities of up to 3 are investigated. As optical density increases, absorptive and dispersive distortions start with peak shape broadening, progress to peak splitting, and ultimately result in a previously unexplored coherent transient twisting of the split peaks. In contrast to the low optical density limit, where the 2D peak shape for the Bloch model depends only on the total dephasing time, these distortions of the 2D peak shape at finite optical density vary with the waiting time and the excited state lifetime through coherent transient effects. Experiment-specific conditions are explored, demonstrating the effects of varying beam overlap within the sample and of pseudo-time domain filtering. For beam overlap starting at the sample entrance, decreasing the length of beam overlap reduces the line width along the ωτ axis but also reduces signal intensity. A pseudo-time domain filter, where signal prior to the center of the last excitation pulse is excluded from the FID-referenced 2D signal, reduces propagation distortions along the ωt axis. It is demonstrated that 2DFT rephasing spectra cannot take advantage of an excitation-detection transformation that can eliminate propagation distortions in 2DFT relaxation spectra. Finally, the high optical density experimental 2DFT spectrum of rubidium vapor in argon buffer gas [J. Phys. Chem. A 2013, 117, 6279-6287] is quantitatively compared, in line width, in depth of peak splitting, and in coherent transient peak twisting, to a simulation with optical density higher than that reported.

The Journal of Physical Chemistry A•Apr 16, 2015•42 citations

Ionization dynamics in intense pulsed laser radiation. Effects of frequency chirping

Roberta Marani, E J Robinson

Via a non-perturbative method we study the population dynamics and photoelectron spectra of Cs atoms subject to intense chirped laser pulses, with Gaussian beams. We include above threshold ionization spectral peaks. The frequency of the laser is near resonance with the 6s-7p transition. Dominant couplings are included exactly, weaker ones accounted for perturbatively. We calculate the relevant transition matrix elements, including spin-orbit coupling. The pulse is taken to be a hyperbolic secant in time and the chirping a hyperbolic tangent. This choice allows the equations of motions for the probability amplitudes to be solved analytically as a series expansion in the variable , where is a measure of the pulse length. We find that the chirping changes the ionization dynamics and the photoelectron spectra noticeably, especially for longer pulses of the order of au. The peaks shift and change in height, and interference effects between the 7p levels are enhanced or diminished according to the amount of chirping and its sign. The integrated ionization probability is not strongly affected.

arXiv:physics/9812010•Journal of Physics B Atomic Molecular and Optical Physics•Jan 1, 1999•11 citations

Coherent nonlinear optical response for high-intensity excitation

Rishabh Tripathi, Krishna K. Maurya, Pradeep Kumar +2 more

The calculation of the coherent nonlinear response of a system is essential to correctly interpret results from advanced techniques such as two-dimensional coherent spectroscopy. Usually, even for the simplest systems, such calculations are either performed for low-intensity excitations where perturbative methods are valid and/or by assuming a simplified pulse envelope, such as a δ-function in time. Here, we use the phase-cycling method for the exact calculation of the nonlinear response without making the aforementioned approximations even for high-intensity excitation. We compare the simulation results to several experimental observations to prove the validity of these calculations. The saturation of the photon-echo signal from excitons in a semiconductor quantum well sample is measured. The excitation-intensity dependent measurement shows nonlinear contributions up to twelfth order. Intensity-dependent simulations reproduce this effect without explicitly considering higher-order interactions. In addition, we present simulation results that replicate previously reported experiments with high-intensity excitation of semiconductor quantum dots. By accurately reproducing a variety of phenomena such as higher-order contributions, switching of coherent signals, and changes in photon-echo transients, we prove the efficacy of the phase-cycling method to calculate the coherent nonlinear signal for high-intensity excitation. This method would be particularly useful for systems with multiple, well-separated peaks and/or large inhomogeneities.

arXiv:2411.13290•The Journal of Chemical Physics•Mar 18, 2025•6 citations

Two-dimensional action spectroscopy of excitonic systems: Explicit simulation using a phase-modulation technique

Fikeraddis A. Damtie, A. Wacker, Tõnu Pullerits +1 more

Two-dimensional (2D) spectroscopy has been intensively used to study electronic and vibronic coherences in biological systems and semiconductors. This technique studies coherent as well as incoherent signals that arise from the nonlinear interaction of a sequence of laser pulses. In this paper we present a direct evaluation of the 2D signal based on elementary quantum kinetics in order to compare with the common approximate diagrammatic approaches. Here we consider incoherent action signals such as fluorescence or photocurrent as the observable, which is easily accessible in a measurement. These observables are calculated by solving the time evolution of the density matrix in the Lindblad form, which can take into account all possible decoherence processes. The phase modulation technique is used to separate the relevant nonlinear signals from the other possible interaction pathways. The approach can be used to calculate 2D spectra of any quantum system. For our model system we find a good agreement for the quantum beating between the coupled states.

Physical Review A•Nov 13, 2017•48 citations
The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.
The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.
Two-dimensional (2D) spectroscopy is a powerful pump-pump-probe technique for revealing couplings between quantum states and disentangling the different contributions to the optical response of a system. We present an efficient method for 2D spectroscopy simulations in the Markovian limit for the environment, capable of handling arbitrary pulse shapes and reproducing time-ordering and overlapping pulse effects, while maintaining a computational cost that scales linearly with the number of sampling points. We leverage this framework to investigate how 2D spectra are affected by spectral phase distortions and highly non-Gaussian pulse shapes, such as those produced experimentally by hollow-core fibers or non-collinear optical amplifiers. We show that realistic pulses can induce the appearance of additional spectral features, lineshape distortions and oscillating contributions in the system's dynamics. Notably, even weak temporal pulse tails arising from uncorrected high-order spectral phase terms cause visible changes in the 2D spectra. We also find that homodyne detection schemes employed in experiments can mitigate the presence of such pulse effects. These results emphasize the importance of including realistic pulses in 2D spectroscopy simulations to identify pulse-induced effects and minimize ambiguities in the interpretation of experimental data.
A solution to Maxwell's equations in the three-dimensional frequency domain is used to calculate rephasing two-dimensional Fourier transform (2DFT) spectra of the D2 line of atomic rubidium vapor in argon buffer gas. Experimental distortions from the spatial propagation of pulses through the sample are simulated in 2DFT spectra calculated for the homogeneous Bloch line shape model. Spectral features that appear at optical densities of up to 3 are investigated. As optical density increases, absorptive and dispersive distortions start with peak shape broadening, progress to peak splitting, and ultimately result in a previously unexplored coherent transient twisting of the split peaks. In contrast to the low optical density limit, where the 2D peak shape for the Bloch model depends only on the total dephasing time, these distortions of the 2D peak shape at finite optical density vary with the waiting time and the excited state lifetime through coherent transient effects. Experiment-specific conditions are explored, demonstrating the effects of varying beam overlap within the sample and of pseudo-time domain filtering. For beam overlap starting at the sample entrance, decreasing the length of beam overlap reduces the line width along the ωτ axis but also reduces signal intensity. A pseudo-time domain filter, where signal prior to the center of the last excitation pulse is excluded from the FID-referenced 2D signal, reduces propagation distortions along the ωt axis. It is demonstrated that 2DFT rephasing spectra cannot take advantage of an excitation-detection transformation that can eliminate propagation distortions in 2DFT relaxation spectra. Finally, the high optical density experimental 2DFT spectrum of rubidium vapor in argon buffer gas [J. Phys. Chem. A 2013, 117, 6279-6287] is quantitatively compared, in line width, in depth of peak splitting, and in coherent transient peak twisting, to a simulation with optical density higher than that reported.
Via a non-perturbative method we study the population dynamics and photoelectron spectra of Cs atoms subject to intense chirped laser pulses, with Gaussian beams. We include above threshold ionization spectral peaks. The frequency of the laser is near resonance with the 6s-7p transition. Dominant couplings are included exactly, weaker ones accounted for perturbatively. We calculate the relevant transition matrix elements, including spin-orbit coupling. The pulse is taken to be a hyperbolic secant in time and the chirping a hyperbolic tangent. This choice allows the equations of motions for the probability amplitudes to be solved analytically as a series expansion in the variable , where is a measure of the pulse length. We find that the chirping changes the ionization dynamics and the photoelectron spectra noticeably, especially for longer pulses of the order of au. The peaks shift and change in height, and interference effects between the 7p levels are enhanced or diminished according to the amount of chirping and its sign. The integrated ionization probability is not strongly affected.
The calculation of the coherent nonlinear response of a system is essential to correctly interpret results from advanced techniques such as two-dimensional coherent spectroscopy. Usually, even for the simplest systems, such calculations are either performed for low-intensity excitations where perturbative methods are valid and/or by assuming a simplified pulse envelope, such as a δ-function in time. Here, we use the phase-cycling method for the exact calculation of the nonlinear response without making the aforementioned approximations even for high-intensity excitation. We compare the simulation results to several experimental observations to prove the validity of these calculations. The saturation of the photon-echo signal from excitons in a semiconductor quantum well sample is measured. The excitation-intensity dependent measurement shows nonlinear contributions up to twelfth order. Intensity-dependent simulations reproduce this effect without explicitly considering higher-order interactions. In addition, we present simulation results that replicate previously reported experiments with high-intensity excitation of semiconductor quantum dots. By accurately reproducing a variety of phenomena such as higher-order contributions, switching of coherent signals, and changes in photon-echo transients, we prove the efficacy of the phase-cycling method to calculate the coherent nonlinear signal for high-intensity excitation. This method would be particularly useful for systems with multiple, well-separated peaks and/or large inhomogeneities.
Two-dimensional (2D) spectroscopy has been intensively used to study electronic and vibronic coherences in biological systems and semiconductors. This technique studies coherent as well as incoherent signals that arise from the nonlinear interaction of a sequence of laser pulses. In this paper we present a direct evaluation of the 2D signal based on elementary quantum kinetics in order to compare with the common approximate diagrammatic approaches. Here we consider incoherent action signals such as fluorescence or photocurrent as the observable, which is easily accessible in a measurement. These observables are calculated by solving the time evolution of the density matrix in the Lindblad form, which can take into account all possible decoherence processes. The phase modulation technique is used to separate the relevant nonlinear signals from the other possible interaction pathways. The approach can be used to calculate 2D spectra of any quantum system. For our model system we find a good agreement for the quantum beating between the coupled states.