© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2608.02275

Effects of realistic pulse shapes in two-dimensional spectroscopy

M. Russo, R. Gilliot, A. Blech, M. Joffre, C. P. Koch, H. Seiler

quant-phSubmitted Aug 3, 2026• Announced Aug 4, 2026• 0 citations

Abstract

Two-dimensional (2D) spectroscopy is a powerful pump-pump-probe technique for revealing couplings between quantum states and disentangling the different contributions to the optical response of a system. We present an efficient method for 2D spectroscopy simulations in the Markovian limit for the environment, capable of handling arbitrary pulse shapes and reproducing time-ordering and overlapping pulse effects, while maintaining a computational cost that scales linearly with the number of sampling points. We leverage this framework to investigate how 2D spectra are affected by spectral phase distortions and highly non-Gaussian pulse shapes, such as those produced experimentally by hollow-core fibers or non-collinear optical amplifiers. We show that realistic pulses can induce the appearance of additional spectral features, lineshape distortions and oscillating contributions in the system's dynamics. Notably, even weak temporal pulse tails arising from uncorrected high-order spectral phase terms cause visible changes in the 2D spectra. We also find that homodyne detection schemes employed in experiments can mitigate the presence of such pulse effects. These results emphasize the importance of including realistic pulses in 2D spectroscopy simulations to identify pulse-induced effects and minimize ambiguities in the interpretation of experimental data.

Comments: 23 pages, 14 figures

Related papers

Effects of high pulse intensity and chirp in two-dimensional electronic spectroscopy

Marcel Binz, Lukas Bruder, Lipeng Chen +3 more

The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.

•Apr 28, 2020•0 citations

Pulse Propagation Effects in Optical 2D Fourier-Transform Spectroscopy: Theory

Austin P. Spencer, Hebin Li, Steven T. Cundiff +1 more

A solution to Maxwell's equations in the three-dimensional frequency domain is used to calculate rephasing two-dimensional Fourier transform (2DFT) spectra of the D2 line of atomic rubidium vapor in argon buffer gas. Experimental distortions from the spatial propagation of pulses through the sample are simulated in 2DFT spectra calculated for the homogeneous Bloch line shape model. Spectral features that appear at optical densities of up to 3 are investigated. As optical density increases, absorptive and dispersive distortions start with peak shape broadening, progress to peak splitting, and ultimately result in a previously unexplored coherent transient twisting of the split peaks. In contrast to the low optical density limit, where the 2D peak shape for the Bloch model depends only on the total dephasing time, these distortions of the 2D peak shape at finite optical density vary with the waiting time and the excited state lifetime through coherent transient effects. Experiment-specific conditions are explored, demonstrating the effects of varying beam overlap within the sample and of pseudo-time domain filtering. For beam overlap starting at the sample entrance, decreasing the length of beam overlap reduces the line width along the ωτ axis but also reduces signal intensity. A pseudo-time domain filter, where signal prior to the center of the last excitation pulse is excluded from the FID-referenced 2D signal, reduces propagation distortions along the ωt axis. It is demonstrated that 2DFT rephasing spectra cannot take advantage of an excitation-detection transformation that can eliminate propagation distortions in 2DFT relaxation spectra. Finally, the high optical density experimental 2DFT spectrum of rubidium vapor in argon buffer gas [J. Phys. Chem. A 2013, 117, 6279-6287] is quantitatively compared, in line width, in depth of peak splitting, and in coherent transient peak twisting, to a simulation with optical density higher than that reported.

The Journal of Physical Chemistry A•Apr 16, 2015•42 citations

Modeling and correction of distorted two-dimensional Fourier transform spectra from pixelated pulse shaping devices

Erik M. Grumstrup, Niels H. Damrauer

Two-dimensional Fourier transform spectra of a three level model system are simulated using a non-perturbative density matrix formalism. The electric field distortions resultant from using pixelated pulse shaping devices to produce phase-locked pulse pairs are modeled and the effects on the recovered spectra are examined. To minimize spectral distortions, a temporal filtering scheme is employed which eliminates contributions from spurious sample polarizations.

Optics Express•Aug 28, 2012•0 citations

Effects of high pulse intensity and chirp in two-dimensional electronic spectroscopy of an atomic vapor

Marcel Binz, Lukas Bruder, Lipeng Chen +3 more

The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.

arXiv:2004.13366•Optics Express•Jun 6, 2020•23 citations

Pulse overlap ambiguities in multiple quantum coherence spectroscopy

Ulrich Bangert, Lukas Bruder, Frank Stienkemeier

Coherent two-dimensional electronic spectroscopy probes ultrafast dynamics using femtosecond pulses. In the case where the time scale of the studied dynamics become comparable to the pulse duration, pulse overlap effects may compromise the experimental data. Here, we perform one-dimensional coherence scans and study pulse overlap effects in clean two-level systems. We find parasitic multiple-quantum coherences as a consequence of the arbitrary time ordering during the temporal pulse overlap. Surprisingly, the coherence lifetimes exceed the pulse coherence time by a factor of 1.85. These findings have important implications for the interpretation of higher-order coherent two-dimensional and related spectroscopy experiments.

arXiv:2206.06740•Optics Letters•Dec 21, 2022•7 citations

Spectral Tailoring of Inhomogeneous Optical Response Using Two-Dimensional Coherent Spectroscopy

Pradeep Kumar, Rohan Singh

Controlling the coherent optical response of inhomogeneous ensembles is a key challenge in advancing light-matter interaction engineering. We present a comparative study of two spectral tailoring approaches using two-dimensional coherent spectroscopy (2DCS): the prepulse and double-pulse (DP) methods. In the prepulse scheme, a high-intensity pulse induces Rabi oscillations, modulating the 2D spectral amplitude and lineshape when its spectral bandwidth matches the ensemble full width at half maximum (FWHM). To overcome this limitation, the DP method employs variable inter-pulse delay to generate predetermined periodic spectral modulation without bandwidth constraints. Moreover, tuning the relative phase between DP pulses allows selective switching of frequency components, enabling controlled enhancement or suppression of distinct spectral features. These observations highlight that, while the prepulse approach is constrained by spectral bandwidth, the DP method provides a more versatile and reliable route to manipulate the coherent optical response of inhomogeneous ensembles. We are hoping these findings might stimulate further research in optical switching and coherent storage for quantum memory devices using inhomogeneous ensembles.

arXiv:2601.05753•Jan 9, 2026•0 citations

Two-dimensional (2D) spectroscopy is a powerful pump-pump-probe technique for revealing couplings between quantum states and disentangling the different contributions to the optical response of a system. We present an efficient method for 2D spectroscopy simulations in the Markovian limit for the environment, capable of handling arbitrary pulse shapes and reproducing time-ordering and overlapping pulse effects, while maintaining a computational cost that scales linearly with the number of sampling points. We leverage this framework to investigate how 2D spectra are affected by spectral phase distortions and highly non-Gaussian pulse shapes, such as those produced experimentally by hollow-core fibers or non-collinear optical amplifiers. We show that realistic pulses can induce the appearance of additional spectral features, lineshape distortions and oscillating contributions in the system's dynamics. Notably, even weak temporal pulse tails arising from uncorrected high-order spectral phase terms cause visible changes in the 2D spectra. We also find that homodyne detection schemes employed in experiments can mitigate the presence of such pulse effects. These results emphasize the importance of including realistic pulses in 2D spectroscopy simulations to identify pulse-induced effects and minimize ambiguities in the interpretation of experimental data.

The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.

A solution to Maxwell's equations in the three-dimensional frequency domain is used to calculate rephasing two-dimensional Fourier transform (2DFT) spectra of the D2 line of atomic rubidium vapor in argon buffer gas. Experimental distortions from the spatial propagation of pulses through the sample are simulated in 2DFT spectra calculated for the homogeneous Bloch line shape model. Spectral features that appear at optical densities of up to 3 are investigated. As optical density increases, absorptive and dispersive distortions start with peak shape broadening, progress to peak splitting, and ultimately result in a previously unexplored coherent transient twisting of the split peaks. In contrast to the low optical density limit, where the 2D peak shape for the Bloch model depends only on the total dephasing time, these distortions of the 2D peak shape at finite optical density vary with the waiting time and the excited state lifetime through coherent transient effects. Experiment-specific conditions are explored, demonstrating the effects of varying beam overlap within the sample and of pseudo-time domain filtering. For beam overlap starting at the sample entrance, decreasing the length of beam overlap reduces the line width along the ωτ axis but also reduces signal intensity. A pseudo-time domain filter, where signal prior to the center of the last excitation pulse is excluded from the FID-referenced 2D signal, reduces propagation distortions along the ωt axis. It is demonstrated that 2DFT rephasing spectra cannot take advantage of an excitation-detection transformation that can eliminate propagation distortions in 2DFT relaxation spectra. Finally, the high optical density experimental 2DFT spectrum of rubidium vapor in argon buffer gas [J. Phys. Chem. A 2013, 117, 6279-6287] is quantitatively compared, in line width, in depth of peak splitting, and in coherent transient peak twisting, to a simulation with optical density higher than that reported.

The effects of high pulse intensity and chirp on two-dimensional electronic spectroscopy signals are experimentally investigated in the highly non-perturbative regime using atomic rubidium vapor as clean model system. Data analysis is performed based on higher-order Feynman diagrams and non-perturbative numerical simulations of the system response. It is shown that higher-order contributions may lead to a fundamental change of the static appearance and beating-maps of the 2D spectra and that chirped pulses enhance or suppress distinct higher-order pathways. We further give an estimate of the threshold intensity beyond which the high-intensity effects become visible for the system under consideration.

Coherent two-dimensional electronic spectroscopy probes ultrafast dynamics using femtosecond pulses. In the case where the time scale of the studied dynamics become comparable to the pulse duration, pulse overlap effects may compromise the experimental data. Here, we perform one-dimensional coherence scans and study pulse overlap effects in clean two-level systems. We find parasitic multiple-quantum coherences as a consequence of the arbitrary time ordering during the temporal pulse overlap. Surprisingly, the coherence lifetimes exceed the pulse coherence time by a factor of 1.85. These findings have important implications for the interpretation of higher-order coherent two-dimensional and related spectroscopy experiments.

Controlling the coherent optical response of inhomogeneous ensembles is a key challenge in advancing light-matter interaction engineering. We present a comparative study of two spectral tailoring approaches using two-dimensional coherent spectroscopy (2DCS): the prepulse and double-pulse (DP) methods. In the prepulse scheme, a high-intensity pulse induces Rabi oscillations, modulating the 2D spectral amplitude and lineshape when its spectral bandwidth matches the ensemble full width at half maximum (FWHM). To overcome this limitation, the DP method employs variable inter-pulse delay to generate predetermined periodic spectral modulation without bandwidth constraints. Moreover, tuning the relative phase between DP pulses allows selective switching of frequency components, enabling controlled enhancement or suppression of distinct spectral features. These observations highlight that, while the prepulse approach is constrained by spectral bandwidth, the DP method provides a more versatile and reliable route to manipulate the coherent optical response of inhomogeneous ensembles. We are hoping these findings might stimulate further research in optical switching and coherent storage for quantum memory devices using inhomogeneous ensembles.