Manipulating and imaging laser-cooled atoms with optical tools

Paul Rudy

Carl Wieman

There has been considerable activity recently on cooling and trapping atoms using laser light. This work raises expectations that laser manipulation of atoms will be an important new tool for atomic physics. However, up to now, almost all the work has been on sodium atoms using light from dye lasers. The expense and complication of a narrowband dye laser system is a considerable limitation on the possible uses of this tool. In response to this we have been exploring the use of inexpensive diode lasers for the manipulation of atoms. We have found that diode lasers work very well for this purpose and even have some advantages over dye lasers in addition to cost and ease of use. We previously reported using light from diode lasers to stop a beam of atomic cesium. Here we discuss our more recent work using diode lasers to produce extremely cold cesium vapor via optical molasses cooling and the demonstration of a new type of optical trap. This is a purely optical spontaneous force trap which uses spatially inhomogeneous optical pumping to circumvent the optical Earnshaw theorem.

Jörg Helge Müller, D. Bettermann, V. Rieger +10 more

Jun He, Baodong Yang, Tiancai Zhang +1 more

Optical tweezers have become powerful tools for the confinement and manipulation of neutral atoms, molecules, mesoscopic biological molecules and living cells. In our experiment, a single caesium atom was prepared in a large-magnetic-gradient magneto-optical trap (MOT). It was then efficiently transferred back and forth between the MOT and a 1064 nm microscopic optical tweezer. The atomic transfer between the MOT and the tweezer can be employed to measure the trapping lifetime and the energy distribution of the single atom in the tweezer. In order to extend the trapping lifetime, laser cooling is used to decrease the atom's kinetic energy. The trapping lifetime was extended from ∼75 to ∼130 s by applying a 10 ms laser cooling phase just after the single atom is transferred into the tweezer.

E. Giacobino, Astrid Lambrecht, Jean-Michel Courty +1 more

Xin Wang, Yuan Sun, Hua-Dong Cheng +4 more

We develop a form of nondestructive optical thermometry to deterministically measure the temperature of the selected segment of a cold-atom ensemble. The essence is to monitor the thermal expansion of the targeted cold atoms after their labeling through manipulation of the internal states, and the nondestructive property relies on nearly lossless detection via the driving of a cycling transition. The temperature information is extracted from the change of densities via a bucket detector without the necessity of a complicated imaging setup. We also focus on the application of this method to isotropic laser cooling, and it has the capability of addressing only the atoms on the optical detection axis within the enclosure, which is readily compatible with typical configurations of atomic clocks or quantum sensing. Our results confirm the sub-Doppler-cooling features of isotropic laser cooling, and we further investigate the relevant cooling properties. Furthermore, we demonstrate the recently developed optical configuration with injection of cooling-laser light in the form of hollow beams, which helps to enhance the cooling performance and accumulate more cold atoms in the central regions.