Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optical and Quantum Sensing and Precision Metrology II

Quantum metrology with Fiber Fabry-Perot cavities (Conference Presentation)

Jakob Reichel

Published Mar 27, 2020• 0 citations
Publisher

Abstract

The development of laser-machined, ultralow roughness micromirrors on optical fiber tips has enabled a new type of high-finesse Fiber Fabry-Perot cavities (FFPs). These microcavities are used very successfully in an increasing number of quantum technology applications, reaching from single-photon sources with various solid-state emitters to entanglement generation in ultracold atomic ensembles. They are also attractive for general photonics applications where high cavity finesse is desired, combinin narrow resonance width and large stopband with high transmission, excellent passive stability and built-in fiber coupling. I will give a short overview of this cavity technology and describe an experiment where we are using a next-generation FFP cavity to generate long-lived spin squeezed states in an atomic clock on a chip.

DOI
10.1117/12.2552621

Related papers

High finesse optical fiber cavities: optimal alignment and robust stabilization (Conference Presentation)

Lothar Ratschbacher, Jose Gallego, Sutapa Ghosh +4 more

Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.

•Aug 3, 2016•0 citations

A fiber Fabry-Perot cavity with high finesse

D. Hunger, T. Steinmetz, Yves Colombe +3 more

Abstract. We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F ≥ 130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband. PACS numbers: 07.60.Vg, 42.50.Ex, 42.50.Pq, 42.81.Wg 1.

•Jan 1, 2010•358 citations

A fiber Fabry–Perot cavity with high finesse

D Hunger, T. Steinmetz, Yves Colombe +3 more

We have realized a fiber-based Fabry–Perot cavity with CO 2 laser-machined mirrors. It combines very small size, high finesse , small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose–Einstein condensates enabled by this cavity (Colombe Y et al 2007 Nature 450 272). It will also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband.

arXiv:1005.0067•New Journal of Physics•Jun 28, 2010•438 citations

Micro ring cavities with laser-machined mirrors for quantum-enhanced sensing

Torben Pöpplau, Romain Long, Jakob Reichel

The fiber Fabry-Perot microcavities (FFPs) with laser-machined mirrors developed in our group have found many applications in atomic and solid-state cavity QED experiments and beyond. Here we show how laser-machined mirror technology can be leveraged to realize a micro-ring cavity. While maintaining key advantages such as small mode cross-section and high finesse, this novel design replaces the FPP's standing wave with a running-wave field that has no blind spots, and gives access to separated clockwise and anticlockwise modes. These are crucial advantages for applications such as atomic spin squeezing for quantum-enhanced clocks and sensors.

Optical and Quantum Sensing and Precision Metrology•Mar 4, 2021•0 citations

Cavity QED with Fiber Cavities: From Atoms to Quantum Well Excitons

Jakob Reichel

We have developed laser-machined ultralow-roughness mirrors with curvatures below 100um yielding stable fiber Fabry-Perot cavities with measured finesse above F=100000 and microscopic volumes. This has enabled exceptional coupling strength in atomic CQED and solid-state CQED with tunable cavities.

Conference on Lasers and Electro-Optics•Jan 1, 2012•0 citations

High-finesse fiber Fabry–Perot cavities: stabilization and mode matching analysis

J. Gallego, S. Ghosh, Seyed Khalil Alavi +4 more

Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.

arXiv:1508.05289•Applied Physics B•Mar 1, 2016•74 citations
The development of laser-machined, ultralow roughness micromirrors on optical fiber tips has enabled a new type of high-finesse Fiber Fabry-Perot cavities (FFPs). These microcavities are used very successfully in an increasing number of quantum technology applications, reaching from single-photon sources with various solid-state emitters to entanglement generation in ultracold atomic ensembles. They are also attractive for general photonics applications where high cavity finesse is desired, combinin narrow resonance width and large stopband with high transmission, excellent passive stability and built-in fiber coupling. I will give a short overview of this cavity technology and describe an experiment where we are using a next-generation FFP cavity to generate long-lived spin squeezed states in an atomic clock on a chip.
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.
Abstract. We have realized a fiber-based Fabry-Perot cavity with CO2 laser-machined mirrors. It combines very small size, high finesse F ≥ 130000, small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose-Einstein condensates enabled by this cavity [Y. Colombe et al., Nature 450, 272 (2007)]. It should also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband. PACS numbers: 07.60.Vg, 42.50.Ex, 42.50.Pq, 42.81.Wg 1.
We have realized a fiber-based Fabry–Perot cavity with CO 2 laser-machined mirrors. It combines very small size, high finesse , small waist and mode volume, and good mode matching between the fiber and cavity modes. This combination of features is a major advance for cavity quantum electrodynamics (CQED), as shown in recent CQED experiments with Bose–Einstein condensates enabled by this cavity (Colombe Y et al 2007 Nature 450 272). It will also be suitable for a wide range of other applications, including coupling to solid-state emitters, gas detection at the single-particle level, fiber-coupled single-photon sources and high-resolution optical filters with large stopband.
The fiber Fabry-Perot microcavities (FFPs) with laser-machined mirrors developed in our group have found many applications in atomic and solid-state cavity QED experiments and beyond. Here we show how laser-machined mirror technology can be leveraged to realize a micro-ring cavity. While maintaining key advantages such as small mode cross-section and high finesse, this novel design replaces the FPP's standing wave with a running-wave field that has no blind spots, and gives access to separated clockwise and anticlockwise modes. These are crucial advantages for applications such as atomic spin squeezing for quantum-enhanced clocks and sensors.
Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.