Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Softwaretechnik-Trends

Low-noise 205 GHz SIS Mixers Using High Current Density Nb and NbN Tunnel Junctions

William R. McGrath, Hamid Javadi, S.R. Cypher, B. Bumble, B. D. Hunt, Henry George LeDuc

Published Feb 1, 1991• 3 citations
OpenAlex

Related papers

Development of Low-Noise Terahertz SIS Mixers with High Current Density NbN/AIN/NbN Tunnel Junctions

Zhen Wang, Yoshinori Uzawa, Akira Kawakami

IEICE Transactions on Electronics•Jan 25, 2000•2 citations

Performance of SIS mixers at 205 Ghz employing submicron Nb and NbN tunnel junctions

Hamid Javadi

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Dec 1, 1990•4 citations

High-Gap Nb-AlN-NbN SIS Junctions for Frequency Band 790–950 GHz

Andrey V. Khudchenko, Andrey M. Baryshev, Kirill I. Rudakov +4 more

We have designed, fabricated, and tested superconductor-insulator-superconductor (SIS) mixers based on Nb/AlN/NbN twin tunnel junctions for waveguide receivers operating in a frequency range of 790-950 GHz. Electromagnetic simulations and measurement results of the mixer performance are presented. The junctions have a high gap voltage of 3.15 mV and a high current density of about 30 kA/cm2, providing a wide receiver band, which was confirmed by Fourier transform spectrometer (FTS) and noise temperature measurements. The corrected receiver noise temperature varies from 240 K at low frequencies to 550 K at the high end of the band. The influence of the SIS junction heating on its characteristics has been studied and compared to another similar high current density technologies. The heating does not have a critical impact on the mixer performance.

IEEE Transactions on Terahertz Science and Technology•Dec 24, 2015•49 citations

Quasi-optical submillimeter-wave SIS mixers with NbN/A1N/NbN tunnel junctions

Yoshinori Uzawa, Zhen Wang, Akira Kawakami

We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.

•Mar 1, 1996•2 citations

Terahertz high-sensitivity SIS mixer based on Nb–AlN–NbN hybrid superconducting tunnel junctions

Bo-Liang 博梁 Liu 刘, Dong 冬 Liu 刘, Ming Yao +8 more

The terahertz band, a unique segment of the electromagnetic spectrum, is crucial for observing the cold, dark universe and plays a pivotal role in cutting-edge scientific research, including the study of cosmic environments that support life and imaging black holes. High-sensitivity superconductor–insulator–superconductor (SIS) mixers are essential detectors for terahertz astronomical telescopes and interferometric arrays. Compared to the commonly used classical Nb/AlO x /Nb superconducting tunnel junction, the Nb/AlN/NbN hybrid superconducting tunnel junction has a higher energy gap voltage and can achieve a higher critical current density. This makes it particularly promising for the development of ultra-wideband, high-sensitivity coherent detectors or mixers in various scientific research fields. In this paper, we present a superconducting SIS mixer based on Nb/AlN/NbN parallel-connected twin junctions (PCTJ), which has a bandwidth extending up to 490 GHz–720 GHz. The best achieved double-sideband (DSB) noise temperature (sensitivity) is below three times the quantum noise level.

Chinese Physics B•Feb 22, 2024•5 citations

Performance of all-NbN superconductive tunnel junctions as mixers at 205 GHz

William R. McGrath, J. A. Stern, Henry George LeDuc

Physica B Condensed Matter•Aug 1, 1990•1 citation
We have designed, fabricated, and tested superconductor-insulator-superconductor (SIS) mixers based on Nb/AlN/NbN twin tunnel junctions for waveguide receivers operating in a frequency range of 790-950 GHz. Electromagnetic simulations and measurement results of the mixer performance are presented. The junctions have a high gap voltage of 3.15 mV and a high current density of about 30 kA/cm2, providing a wide receiver band, which was confirmed by Fourier transform spectrometer (FTS) and noise temperature measurements. The corrected receiver noise temperature varies from 240 K at low frequencies to 550 K at the high end of the band. The influence of the SIS junction heating on its characteristics has been studied and compared to another similar high current density technologies. The heating does not have a critical impact on the mixer performance.
We report on low-noise heterodyne mixing with NbN/A1N/NbN tunnel junctions in the submillimeter-wave region for the first time. The receiver consists of the quasi-optical NbN SIS mixer with an integrated tuning circuit in which a radial short stub tuner is incorporated to resonate out the junction capacitance for RF matching and a balanced IF circuit for broadband IF matching. The prepared NbN SIS junction has a current density of 20 kA/cm 2 and is about 1 I1111 in diameter, supplying a small coC JRN product (o)CJRN = 3 at 300 GHz). The junctions showed good dc I-V characteristics, excellent submillimeter-wave responses and sensitive heterodyne mixing responses. From 254 to 350 GHz the average receiver noise temperature measured using by the standard Y-factor method was about 250 K (DSB) at 5 K. The lowest receiver noise temperature, 200 K (DSB), was obtained at around 303 GHz. Comparing NbN/A1N/NbN and Nb/A10x/Nb tunnel junction performance with the same tuning circuit showed that the frequency dependence of the receiver noise temperature agreed well in the two receivers. These results suggest that our well-controlled NbN SIS junctions can be used for terahertz mixer elements instead of Nb SIS junctions.
The terahertz band, a unique segment of the electromagnetic spectrum, is crucial for observing the cold, dark universe and plays a pivotal role in cutting-edge scientific research, including the study of cosmic environments that support life and imaging black holes. High-sensitivity superconductor–insulator–superconductor (SIS) mixers are essential detectors for terahertz astronomical telescopes and interferometric arrays. Compared to the commonly used classical Nb/AlO x /Nb superconducting tunnel junction, the Nb/AlN/NbN hybrid superconducting tunnel junction has a higher energy gap voltage and can achieve a higher critical current density. This makes it particularly promising for the development of ultra-wideband, high-sensitivity coherent detectors or mixers in various scientific research fields. In this paper, we present a superconducting SIS mixer based on Nb/AlN/NbN parallel-connected twin junctions (PCTJ), which has a bandwidth extending up to 490 GHz–720 GHz. The best achieved double-sideband (DSB) noise temperature (sensitivity) is below three times the quantum noise level.