© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Photonics Research

Superconducting nanowire multi-photon detectors enabled by current reservoirs

Kai Zou, Yun Meng, Zhao Wang, Xiaolong Hu

Published Feb 19, 2020• 11 citations

Abstract

Single-photon detectors are ubiquitous devices in quantum-photonic-based communication, computation, metrology, and sensing. In these applications, N -fold coincidence photon counting is often needed, for example, to characterize entanglement. However, N -fold coincidence photon counting typically requires N individual single-photon detectors and associated bias and readout electronics, and these resources could become prohibitive if N goes large and the detectors need to work at cryogenic temperatures. Here, to break this limit on N , we propose a device architecture based on N cascaded photosensitive superconducting nanowires and one wider nanowire that functions as a current reservoir. We show that by strategically designing the device, the network of these superconducting nanowires can work in a synergic manner as an n -photon detector, where n can be from 1 to N , depending on the bias conditions. We therefore name the devices of this type superconducting nanowire multi-photon detectors (SNMPDs). In addition to its simple one-port bias and readout circuitry, the coincidences are counted internally in the detector, eliminating the need for external multi-channel, time-correlated pulse counters. We believe that the SNMPDs proposed in this work could open avenues towards conveniently measuring high-order temporal correlations of light and characterizing multi-photon entanglement.

DOI: 10.1364/prj.380764

Related papers

Supeconducting nanowire multi-photon detectors

Kai Zou, Yun Meng, Zhao Wang +1 more

We propose superconducting nanowire multi-photon detectors with simple bias and readout circuitry to count n-fold photon coincidences, where n is set by bias conditions. We present the concept, device architecture, and operating principle.

Conference on Lasers and Electro-Optics•Jan 1, 2020•0 citations

Superconducting Nanowire Single-Photon Detectors and Multi-Photon Detectors

Kai Zou, Yun Meng, Nan Hu +6 more

We present our research progress in superconducting nanowire single-photon detectors (SNSPDs) and multi-photon detectors (SNMPDs), including fractal SNSPDs with reduced polarization sensitivity, two mechanisms of device timing jitter, and SNMPDs integrated with current reservoirs.

Quantum 2.0 Conference and Exhibition•Jan 1, 2022•1 citation

Scaling waveguide-integrated superconducting nanowire single-photon detector solutions to large numbers of independent optical channels

Matthias Häußler, Robin Terhaar, Martin A. Wolff +11 more

Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.

arXiv:2207.12060•Review of Scientific Instruments•Jan 1, 2023•23 citations

Photonic readout of superconducting nanowire single photon counting detectors

Rajeev J. Ram, Marc de, Emma E. Wollman +1 more

Scalable, low power, high speed data transfer between cryogenic and room temperature environments is essential for the realization of practical, large-scale systems based on superconducting technologies. Optical fiber presents a 100–1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and allows for very high bandwidth densities by carrying multiple signals through the same physical fiber. By operating a CMOS modulator in the forward bias regime at a temperature of 3.6 K, we have demonstrated the optical readout of a superconducting nanowire single-photon detector (SNSPD) without the need for an interfacing device.

Advanced Photon Counting Techniques•Jun 15, 2023•0 citations

Hot-spot relaxation time current dependence in niobium nitride waveguide-integrated superconducting nanowire single-photon detectors (Conference Presentation)

Simone Ferrari, Wolfram H. P. Pernice

We realize fast, efficient and small footprint niobium nitride superconducting nanowire single photon detectors atop of photonic waveguides. By reducing the bias current of the nanowire, in order to break the superconductivity and trigger a detection event, more than one photon needs to be absorbed in a localized section of the wire within a very short time delay (hot-spot relaxation time), making such devices promising also for multiphoton sensing applications. We adopt a near-infrared pump-probe technique in a cryogenic environment to investigate the bias current dependence of the hot-spot relaxation time. A minimum relaxation time of (22 ± 1) ps is obtained when applying a bias current of 50% of the switching current at a bath temperature of 1.7K. Our study reveals a strong increase of the picosecond relaxation time with increasing bias current. We further adopt the same technique for determining the multi-photon detection regimes of the detector, which are in agreement with standard quantum detector tomography. In this context, we introduce a practical model and reconstruction method for determining the detector sensitivity regimes. Our work provides a complete description of the detector working operation in both number photon threshold sensitivity and time-delay sensitivity. The results allow for implementing on-chip measurement architectures for the characterization of weak classical light emitters and fast single photon sources with only one detector, driven at different biasing currents, with a drastic reduction of the time uncertainty limitations of typical correlation measurement systems.

Optical Sensing, Imaging, and Photon Counting: From X-Rays to THz•Oct 18, 2017•0 citations

Scalable cryogenic readout circuit for a superconducting nanowire single-photon detector system

Clinton Cahall, Daniel J. Gauthier, Jungsang Kim

The superconducting nanowire single-photon detector (SNSPD) is a leading technology for quantum information science applications using photons, and is finding increasing uses in photon-starved classical imaging applications. Critical detector characteristics, such as timing resolution (jitter), reset time, and maximum count rate, are heavily influenced by the readout electronics that sense and amplify the photon detection signal. We describe a readout circuit for SNSPDs using commercial off-the-shelf amplifiers operating at cryogenic temperatures. Our design demonstrates a 35 ps timing resolution and a maximum count rate of over 2 × 107 counts per second, while maintaining <3 mW power consumption per channel, making it suitable for a multichannel readout.

arXiv:1710.04684•Review of Scientific Instruments•Jun 1, 2018•28 citations

Single-photon detectors are ubiquitous devices in quantum-photonic-based communication, computation, metrology, and sensing. In these applications, N -fold coincidence photon counting is often needed, for example, to characterize entanglement. However, N -fold coincidence photon counting typically requires N individual single-photon detectors and associated bias and readout electronics, and these resources could become prohibitive if N goes large and the detectors need to work at cryogenic temperatures. Here, to break this limit on N , we propose a device architecture based on N cascaded photosensitive superconducting nanowires and one wider nanowire that functions as a current reservoir. We show that by strategically designing the device, the network of these superconducting nanowires can work in a synergic manner as an n -photon detector, where n can be from 1 to N , depending on the bias conditions. We therefore name the devices of this type superconducting nanowire multi-photon detectors (SNMPDs). In addition to its simple one-port bias and readout circuitry, the coincidences are counted internally in the detector, eliminating the need for external multi-channel, time-correlated pulse counters. We believe that the SNMPDs proposed in this work could open avenues towards conveniently measuring high-order temporal correlations of light and characterizing multi-photon entanglement.

Superconducting nanowire single-photon detectors are an enabling technology for modern quantum information science and are gaining attractiveness for the most demanding photon counting tasks in other fields. Embedding such detectors in photonic integrated circuits enables additional counting capabilities through nanophotonic functionalization. Here, we show how a scalable number of waveguide-integrated superconducting nanowire single-photon detectors can be interfaced with independent fiber optic channels on the same chip. Our plug-and-play detector package is hosted inside a compact and portable closed-cycle cryostat providing cryogenic signal amplification for up to 64 channels. We demonstrate state-of-the-art multi-channel photon counting performance with average system detection efficiency of (40.5 ± 9.4)% and dark count rate of (123 ± 34) Hz for 32 individually addressable detectors at minimal noise-equivalent power of (5.1 ± 1.2) · 10−18 W/Hz. Our detectors achieve timing jitter as low as 26 ps, which increases to (114 ± 17) ps for high-speed multi-channel operation using dedicated time-correlated single photon counting electronics. Our multi-channel single photon receiver offers exciting measurement capabilities for future quantum communication, remote sensing, and imaging applications.

Scalable, low power, high speed data transfer between cryogenic and room temperature environments is essential for the realization of practical, large-scale systems based on superconducting technologies. Optical fiber presents a 100–1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and allows for very high bandwidth densities by carrying multiple signals through the same physical fiber. By operating a CMOS modulator in the forward bias regime at a temperature of 3.6 K, we have demonstrated the optical readout of a superconducting nanowire single-photon detector (SNSPD) without the need for an interfacing device.

We realize fast, efficient and small footprint niobium nitride superconducting nanowire single photon detectors atop of photonic waveguides. By reducing the bias current of the nanowire, in order to break the superconductivity and trigger a detection event, more than one photon needs to be absorbed in a localized section of the wire within a very short time delay (hot-spot relaxation time), making such devices promising also for multiphoton sensing applications. We adopt a near-infrared pump-probe technique in a cryogenic environment to investigate the bias current dependence of the hot-spot relaxation time. A minimum relaxation time of (22 ± 1) ps is obtained when applying a bias current of 50% of the switching current at a bath temperature of 1.7K. Our study reveals a strong increase of the picosecond relaxation time with increasing bias current. We further adopt the same technique for determining the multi-photon detection regimes of the detector, which are in agreement with standard quantum detector tomography. In this context, we introduce a practical model and reconstruction method for determining the detector sensitivity regimes. Our work provides a complete description of the detector working operation in both number photon threshold sensitivity and time-delay sensitivity. The results allow for implementing on-chip measurement architectures for the characterization of weak classical light emitters and fast single photon sources with only one detector, driven at different biasing currents, with a drastic reduction of the time uncertainty limitations of typical correlation measurement systems.

The superconducting nanowire single-photon detector (SNSPD) is a leading technology for quantum information science applications using photons, and is finding increasing uses in photon-starved classical imaging applications. Critical detector characteristics, such as timing resolution (jitter), reset time, and maximum count rate, are heavily influenced by the readout electronics that sense and amplify the photon detection signal. We describe a readout circuit for SNSPDs using commercial off-the-shelf amplifiers operating at cryogenic temperatures. Our design demonstrates a 35 ps timing resolution and a maximum count rate of over 2 × 107 counts per second, while maintaining <3 mW power consumption per channel, making it suitable for a multichannel readout.