Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Development of RF Power Dividers for the Josephson Arbitrary Waveform Synthesizer

Hao Tian, Oliver Kieler, Ralf Behr, Ruediger Wendisch, Rolf-Werner Gerdau, Karsten Kuhlmann, J. Kohlmann

Published Feb 14, 2020• 8 citations
Publisher

Abstract

To make the experimental setup of the Josephson arbitrary waveform synthesizer less complex by reducing the number of RF cables between room and cryogenic temperature, we developed on-chip RF power dividers. By integration of these components, we can eventually increase the number of Josephson junctions operated by one single pulse-pattern generator channel, and thus reduce the costs of the setup. At Physikalisch-Technische Bundesanstalt, we designed, fabricated, and investigated the performance of two different RF power dividers types: the serial-parallel and the Wilkinson power divider. Spectrally pure sinusoidal waveforms were successfully synthesized with both types of power dividers. With the Wilkinson power divider, we obtained 17.55 mV (rms) at a clock frequency of 15 GHz combined with a test array of 1000 Josephson junctions. As for the serial-parallel power divider combined with a test array of 2000 Josephson junctions, we synthesized rms output voltages of 19.0 mV.

DOI
10.1109/tasc.2020.2970216

Related papers

Investigation of Broadband Wilkinson Power Dividers for Pulse-Driven Josephson Voltage Standards

Hao Tian, Oliver Kieler, Ralf Behr +3 more

This paper describes recent developments for increasing the output voltage of the Josephson Arbitrary Waveform Synthesizer (JAWS) at PTB. For this purpose, we developed modified broadband Wilkinson power dividers, which enable the operation of two or four Josephson junction series arrays per RF channel of the pulse pattern generator and thus the generation of increased output voltages. In detail, we designed and investigated two different Wilkinson power dividers: the one-stage three-section Wilkinson power divider with extended bandwidth and the two-stage single-section Wilkinson divider with more outputs to combine four parallel series arrays. They were both integrated with triple-stacked Josephson junction series arrays. Additionally, a new modulator pulse amplifier was introduced into the JAWS set-up to provide sufficient power for all the junction arrays. Our measurement results show that spectrally pure sinusoidal waveforms were successfully generated with both types of power dividers. With the one-stage three-section Wilkinson power divider, we obtained RMS voltages of nearly 53 mV at a clock-frequency of 15 GHz combined with a test array of 3000 Josephson junctions. As for the two-stage single-section Wilkinson power divider combined with a test array of 6000 Josephson junctions, we synthesized RMS output voltages of about 105 mV. These test results show a promising prospect for quantum voltage standard applications.

IEEE Transactions on Applied Superconductivity•Jan 28, 2021•7 citations

Series Arrays of NbSi Barrier Junctions with RF Power Dividers for AC Josephson Voltage Standards

J. Kohlmann, Hao Tian, Oliver Kieler +3 more

Overdamped Josephson junctions for AC voltage standards are realized with NbxSi1-xbarrier junctions at PTB. The characteristic parameters of the junctions can be tuned over a wide range by adjusting the Nb content and the thickness of the barrier. For the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS), series arrays of up to 15,000 Josephson junctions have been fabricated using junction stacks containing five Josephson junctions. In addition, two types of on-chip power dividers have been investigated at PTB, namely Wilkinson and serial-parallel power dividers, respectively. These developments aim for further increasing the number of Josephson junctions on a single chip and thus for increasing the output voltage.

Conference on Precision Electromagnetic Measurements•Aug 1, 2020•0 citations

A 300 mV Josephson Arbitrary Waveform Synthesizer Chip at NIM

Weiyuan Jia, Jiuhui Song, Yuan Zhong +7 more

This paper describes the status of developing Josephson arbitrary waveform synthesizer (JAWS) chips at NIM (National Institute of Metrology, China). To obtain high junction integration density and fewer data input channels, the chip employs an on-chip Wilkinson power divider and inside/outside dc blocks, enabling both arrays to be driven by a single pulse-generator channel. In addition, the tapered coplanar waveguide structure is used to ensure the microwave uniformity of the long-junction array. Each array consisted of 4000 double-stack Nb/NbxSi1−x/Nb junctions, and 16,000 junctions are integrated in the chip in total. The JAWS chip demonstrates good performance, capable of synthesizing a 300 mV root mean square (rms) voltage with exceptionally low harmonic distortion. Dc and ac voltage-current characteristics measurements indicate that the junctions are with a critical current of 2.5 mA, and a normal-state resistance of 4.5 mΩ per junction. Contact aligners are manually operated to fabricate the chips, and process errors in the fabrication are estimated in this paper.

Applied Sciences•Nov 5, 2025•1 citation

Two-Volt Josephson Arbitrary Waveform Synthesizer Using Wilkinson Dividers

Nathan E. Flowers-Jacobs, Anna E. Fox, Paul D. Dresselhaus +2 more

The root-mean-square (rms) output voltage of the NIST Josephson arbitrary waveform synthesizer (JAWS) has been doubled from 1 V to a record 2 V by combining two new 1 V chips on a cryocooler. This higher voltage will improve calibrations of ac thermal voltage converters and precision voltage measurements that require state-of-the-art quantum accuracy, stability, and signal-to-noise ratio. We achieved this increase in output voltage by using four on-chip Wilkinson dividers and eight inner-outer dc blocks, which enable biasing of eight Josephson junction (JJ) arrays with high-speed inputs from only four high-speed pulse generator channels. This approach halves the number of pulse generator channels required in future JAWS systems. We also implemented on-chip superconducting interconnects between JJ arrays, which reduces systematic errors and enables a new modular chip package. Finally, we demonstrate a new technique for measuring and visualizing the operating current range that reduces the measurement time by almost two orders of magnitude and reveals the relationship between distortion in the output spectrum and output pulse sequence errors.

IEEE Transactions on Applied Superconductivity•Feb 19, 2016•76 citations

Development of josephson arbitrary waveform synthesizer at physikalisch-Technische bundesanstalt (PTB)

Oliver Kieler

This paper presents the basic principle of the pulse-driven ac Josephson voltage standard, also called “Josephson arbitrary waveform synthesizer” (JAWS). We will mainly focus on activities and developments at the Physikalisch-Technische Bundesanstalt (PTB). The JAWS is suitable to generate high precision quantized waveforms, which can be arbitrarily programmed in the frequency and time domain with extremely high spectral purity (typical signal-to-noise ratios SNR of 120–140 dBc). A brief overview of the fabrication technology for highly integrated JAWS circuits with more than 50 000 junctions per chip will be described. This includes the stacked junction technology with up to 5-stacked junctions. The experimental setup and the key-features of JAWS will be shown too. New approaches designed to further increase the output voltage, to simplify the experimental setup, and to extend the range of applications are the on-chip power dividers, the optical pulse drive, and the RF-JAWS. A selected application of the JAWS is described to demonstrate the usability of sophisticated JAWS waveforms for the complex characterization of electrical devices. The PTB JAWS circuits already have a significant impact on the quantum ac voltage metrology community. JAWS chips made at PTB have been distributed to more than 10 national metrology and other research institutes within the framework of international research projects.

Low Temperature Physics•Nov 1, 2024•6 citations

Towards a 1 V Josephson Arbitrary Waveform Synthesizer

Oliver Kieler, Ralf Behr, Ruediger Wendisch +3 more

The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.

IEEE Transactions on Applied Superconductivity•Nov 10, 2014•97 citations
To make the experimental setup of the Josephson arbitrary waveform synthesizer less complex by reducing the number of RF cables between room and cryogenic temperature, we developed on-chip RF power dividers. By integration of these components, we can eventually increase the number of Josephson junctions operated by one single pulse-pattern generator channel, and thus reduce the costs of the setup. At Physikalisch-Technische Bundesanstalt, we designed, fabricated, and investigated the performance of two different RF power dividers types: the serial-parallel and the Wilkinson power divider. Spectrally pure sinusoidal waveforms were successfully synthesized with both types of power dividers. With the Wilkinson power divider, we obtained 17.55 mV (rms) at a clock frequency of 15 GHz combined with a test array of 1000 Josephson junctions. As for the serial-parallel power divider combined with a test array of 2000 Josephson junctions, we synthesized rms output voltages of 19.0 mV.
This paper describes recent developments for increasing the output voltage of the Josephson Arbitrary Waveform Synthesizer (JAWS) at PTB. For this purpose, we developed modified broadband Wilkinson power dividers, which enable the operation of two or four Josephson junction series arrays per RF channel of the pulse pattern generator and thus the generation of increased output voltages. In detail, we designed and investigated two different Wilkinson power dividers: the one-stage three-section Wilkinson power divider with extended bandwidth and the two-stage single-section Wilkinson divider with more outputs to combine four parallel series arrays. They were both integrated with triple-stacked Josephson junction series arrays. Additionally, a new modulator pulse amplifier was introduced into the JAWS set-up to provide sufficient power for all the junction arrays. Our measurement results show that spectrally pure sinusoidal waveforms were successfully generated with both types of power dividers. With the one-stage three-section Wilkinson power divider, we obtained RMS voltages of nearly 53 mV at a clock-frequency of 15 GHz combined with a test array of 3000 Josephson junctions. As for the two-stage single-section Wilkinson power divider combined with a test array of 6000 Josephson junctions, we synthesized RMS output voltages of about 105 mV. These test results show a promising prospect for quantum voltage standard applications.
Overdamped Josephson junctions for AC voltage standards are realized with NbxSi1-xbarrier junctions at PTB. The characteristic parameters of the junctions can be tuned over a wide range by adjusting the Nb content and the thickness of the barrier. For the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS), series arrays of up to 15,000 Josephson junctions have been fabricated using junction stacks containing five Josephson junctions. In addition, two types of on-chip power dividers have been investigated at PTB, namely Wilkinson and serial-parallel power dividers, respectively. These developments aim for further increasing the number of Josephson junctions on a single chip and thus for increasing the output voltage.
This paper describes the status of developing Josephson arbitrary waveform synthesizer (JAWS) chips at NIM (National Institute of Metrology, China). To obtain high junction integration density and fewer data input channels, the chip employs an on-chip Wilkinson power divider and inside/outside dc blocks, enabling both arrays to be driven by a single pulse-generator channel. In addition, the tapered coplanar waveguide structure is used to ensure the microwave uniformity of the long-junction array. Each array consisted of 4000 double-stack Nb/NbxSi1−x/Nb junctions, and 16,000 junctions are integrated in the chip in total. The JAWS chip demonstrates good performance, capable of synthesizing a 300 mV root mean square (rms) voltage with exceptionally low harmonic distortion. Dc and ac voltage-current characteristics measurements indicate that the junctions are with a critical current of 2.5 mA, and a normal-state resistance of 4.5 mΩ per junction. Contact aligners are manually operated to fabricate the chips, and process errors in the fabrication are estimated in this paper.
The root-mean-square (rms) output voltage of the NIST Josephson arbitrary waveform synthesizer (JAWS) has been doubled from 1 V to a record 2 V by combining two new 1 V chips on a cryocooler. This higher voltage will improve calibrations of ac thermal voltage converters and precision voltage measurements that require state-of-the-art quantum accuracy, stability, and signal-to-noise ratio. We achieved this increase in output voltage by using four on-chip Wilkinson dividers and eight inner-outer dc blocks, which enable biasing of eight Josephson junction (JJ) arrays with high-speed inputs from only four high-speed pulse generator channels. This approach halves the number of pulse generator channels required in future JAWS systems. We also implemented on-chip superconducting interconnects between JJ arrays, which reduces systematic errors and enables a new modular chip package. Finally, we demonstrate a new technique for measuring and visualizing the operating current range that reduces the measurement time by almost two orders of magnitude and reveals the relationship between distortion in the output spectrum and output pulse sequence errors.
This paper presents the basic principle of the pulse-driven ac Josephson voltage standard, also called “Josephson arbitrary waveform synthesizer” (JAWS). We will mainly focus on activities and developments at the Physikalisch-Technische Bundesanstalt (PTB). The JAWS is suitable to generate high precision quantized waveforms, which can be arbitrarily programmed in the frequency and time domain with extremely high spectral purity (typical signal-to-noise ratios SNR of 120–140 dBc). A brief overview of the fabrication technology for highly integrated JAWS circuits with more than 50 000 junctions per chip will be described. This includes the stacked junction technology with up to 5-stacked junctions. The experimental setup and the key-features of JAWS will be shown too. New approaches designed to further increase the output voltage, to simplify the experimental setup, and to extend the range of applications are the on-chip power dividers, the optical pulse drive, and the RF-JAWS. A selected application of the JAWS is described to demonstrate the usability of sophisticated JAWS waveforms for the complex characterization of electrical devices. The PTB JAWS circuits already have a significant impact on the quantum ac voltage metrology community. JAWS chips made at PTB have been distributed to more than 10 national metrology and other research institutes within the framework of international research projects.
The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.