Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Series Arrays of NbSi Barrier Junctions with RF Power Dividers for AC Josephson Voltage Standards

J. Kohlmann, Hao Tian, Oliver Kieler, Rolf-Werner Gerdau, B. Egeling, Ralf Behr

Published Aug 1, 2020• 0 citations
Publisher

Abstract

Overdamped Josephson junctions for AC voltage standards are realized with NbxSi1-xbarrier junctions at PTB. The characteristic parameters of the junctions can be tuned over a wide range by adjusting the Nb content and the thickness of the barrier. For the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS), series arrays of up to 15,000 Josephson junctions have been fabricated using junction stacks containing five Josephson junctions. In addition, two types of on-chip power dividers have been investigated at PTB, namely Wilkinson and serial-parallel power dividers, respectively. These developments aim for further increasing the number of Josephson junctions on a single chip and thus for increasing the output voltage.

DOI
10.1109/cpem49742.2020.9191734

Related papers

Series arrays of NbSi barrier Josephson junctions for AC voltage standards

J. Kohlmann, Oliver Kieler, Thomas Scheller +3 more

AC Josephson voltage standards are typically based on series arrays of overdamped Josephson junctions, which are presently realized using an NbxSi1-xbarrier at PTB. The characteristic parameters of these SNS-like junctions can be tuned by the Nb content and the thickness of the barrier over a wide range for operation from 10 GHz to 70 GHz. Based on these junctions, we developed binary-divided 10 V arrays as well as pulse-driven arrays for 1 V output voltages.

Conference on Precision Electromagnetic Measurements•Jul 1, 2016•2 citations

Development and Fabrication of Improved Josephson Series Arrays with NbSi Barrier for AC Voltage Standards

J. Kohlmann, Oliver Kieler, Ruediger Wendisch +2 more

Series arrays of overdamped Josephson junctions compose the basis of AC Josephson voltage standards. Presently, an advanced technology is based on Josephson junctions consisting of an NbxSi1-xbarrier. Using junction stacks containing five Josephson junctions, series arrays of 15,000 junctions have been successfully fabricated at PTB for the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS). The operation of eight arrays simultaneously enable spectrally pure waveforms with output voltages above 1 V to be synthesized.

Conference on Precision Electromagnetic Measurements•Jul 1, 2018•2 citations

Investigation of Broadband Wilkinson Power Dividers for Pulse-Driven Josephson Voltage Standards

Hao Tian, Oliver Kieler, Ralf Behr +3 more

This paper describes recent developments for increasing the output voltage of the Josephson Arbitrary Waveform Synthesizer (JAWS) at PTB. For this purpose, we developed modified broadband Wilkinson power dividers, which enable the operation of two or four Josephson junction series arrays per RF channel of the pulse pattern generator and thus the generation of increased output voltages. In detail, we designed and investigated two different Wilkinson power dividers: the one-stage three-section Wilkinson power divider with extended bandwidth and the two-stage single-section Wilkinson divider with more outputs to combine four parallel series arrays. They were both integrated with triple-stacked Josephson junction series arrays. Additionally, a new modulator pulse amplifier was introduced into the JAWS set-up to provide sufficient power for all the junction arrays. Our measurement results show that spectrally pure sinusoidal waveforms were successfully generated with both types of power dividers. With the one-stage three-section Wilkinson power divider, we obtained RMS voltages of nearly 53 mV at a clock-frequency of 15 GHz combined with a test array of 3000 Josephson junctions. As for the two-stage single-section Wilkinson power divider combined with a test array of 6000 Josephson junctions, we synthesized RMS output voltages of about 105 mV. These test results show a promising prospect for quantum voltage standard applications.

IEEE Transactions on Applied Superconductivity•Jan 28, 2021•7 citations

NbSi Barrier Junctions Tuned for Metrological Applications up to 70 GHz: 20 V Arrays for Programmable Josephson Voltage Standards

F. Muller, Thomas Scheller, Ruediger Wendisch +4 more

PTB started using the robust NbxSi1-xbarrier junction technology for the fabrication of large arrays for the Programmable Josephson Voltage Standard (PJVS) and for the Josephson Arbitrary Waveform Synthesizer 3 years ago. We demonstrate how Nb-doping of the amorphous Si barrier causes the transition from an underdamped to a desired overdamped junction behavior. Special dc SQUIDs have been used to evaluate junction capacitance and noise properties. The critical current of small junctions as a function of applied magnetic field has been investigated. On the basis of an existing 70 GHz design previously used for 10 V PJVS chips, we fabricated for the first time 20 V circuits with nearly 140 000 double-stacked Josephson junctions. A direct on-chip comparison between the two 10 V halves of the binary-divided array confirmed the metrological suitability of the 20 V circuits for dc and ac applications.

IEEE Transactions on Applied Superconductivity•Dec 21, 2012•61 citations

Towards a 1 V Josephson Arbitrary Waveform Synthesizer

Oliver Kieler, Ralf Behr, Ruediger Wendisch +3 more

The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.

IEEE Transactions on Applied Superconductivity•Nov 10, 2014•97 citations

Stacked Josephson Junction Arrays for the Pulse-Driven AC Josephson Voltage Standard

Oliver Kieler, Ruediger Wendisch, Rolf-Werner Gerdau +3 more

We developed a fabrication process to establish large arrays of up to 5-stacked Josephson junctions for the Josephson Arbitrary Waveform Synthesizer (JAWS). SNS-type Josephson junctions with NbxSi1-xbarriers are used for this application. By modifying our standard window process, e.g. to add a CMP (chemical mechanical polishing) and an ALD (atomic layer deposition) step, the yield of this process was increased. An output voltage of 1 V RMS could be achieved by using 4 JAWS arrays in series with a total number of 60,000 5-stacked junctions. The investigation of the current-voltage characteristics (IVC) showed an interesting and potentially useful feature. The required pulse amplitude per junction for getting the maximum Shapiro step width reduces for higher junction stacks. We found that the pulse power linearly reduces with the square of the junction number in the array. The origin of this effect might be a strong neighbour-neighbour interaction of the junctions, which are closely arranged within the stacked configuration. This might generate a strong self-synchronization of the junctions.

IEEE Transactions on Applied Superconductivity•Feb 20, 2021•18 citations
Overdamped Josephson junctions for AC voltage standards are realized with NbxSi1-xbarrier junctions at PTB. The characteristic parameters of the junctions can be tuned over a wide range by adjusting the Nb content and the thickness of the barrier. For the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS), series arrays of up to 15,000 Josephson junctions have been fabricated using junction stacks containing five Josephson junctions. In addition, two types of on-chip power dividers have been investigated at PTB, namely Wilkinson and serial-parallel power dividers, respectively. These developments aim for further increasing the number of Josephson junctions on a single chip and thus for increasing the output voltage.
Series arrays of overdamped Josephson junctions compose the basis of AC Josephson voltage standards. Presently, an advanced technology is based on Josephson junctions consisting of an NbxSi1-xbarrier. Using junction stacks containing five Josephson junctions, series arrays of 15,000 junctions have been successfully fabricated at PTB for the pulse-driven Josephson Arbitrary Waveform Synthesizer (JAWS). The operation of eight arrays simultaneously enable spectrally pure waveforms with output voltages above 1 V to be synthesized.
This paper describes recent developments for increasing the output voltage of the Josephson Arbitrary Waveform Synthesizer (JAWS) at PTB. For this purpose, we developed modified broadband Wilkinson power dividers, which enable the operation of two or four Josephson junction series arrays per RF channel of the pulse pattern generator and thus the generation of increased output voltages. In detail, we designed and investigated two different Wilkinson power dividers: the one-stage three-section Wilkinson power divider with extended bandwidth and the two-stage single-section Wilkinson divider with more outputs to combine four parallel series arrays. They were both integrated with triple-stacked Josephson junction series arrays. Additionally, a new modulator pulse amplifier was introduced into the JAWS set-up to provide sufficient power for all the junction arrays. Our measurement results show that spectrally pure sinusoidal waveforms were successfully generated with both types of power dividers. With the one-stage three-section Wilkinson power divider, we obtained RMS voltages of nearly 53 mV at a clock-frequency of 15 GHz combined with a test array of 3000 Josephson junctions. As for the two-stage single-section Wilkinson power divider combined with a test array of 6000 Josephson junctions, we synthesized RMS output voltages of about 105 mV. These test results show a promising prospect for quantum voltage standard applications.
PTB started using the robust NbxSi1-xbarrier junction technology for the fabrication of large arrays for the Programmable Josephson Voltage Standard (PJVS) and for the Josephson Arbitrary Waveform Synthesizer 3 years ago. We demonstrate how Nb-doping of the amorphous Si barrier causes the transition from an underdamped to a desired overdamped junction behavior. Special dc SQUIDs have been used to evaluate junction capacitance and noise properties. The critical current of small junctions as a function of applied magnetic field has been investigated. On the basis of an existing 70 GHz design previously used for 10 V PJVS chips, we fabricated for the first time 20 V circuits with nearly 140 000 double-stacked Josephson junctions. A direct on-chip comparison between the two 10 V halves of the binary-divided array confirmed the metrological suitability of the 20 V circuits for dc and ac applications.
The establishment at PTB of an AC Josephson voltage standard (Josephson Arbitrary Waveform Synthesizer- JAWS) based on pulse-driven Josephson arrays is focused on achieving an output voltage of at least 1 Vrms which is required for many metrology applications. In this paper, we approached this goal by increasing the number of active junctions in two ways. Firstly, we fabricated arrays containing triple-stacked SNS-type Josephson junctions with NbxSi1-xas barrier material. We obtained current operation margins of about 0.2 mA with arrays of up to 9000 Josephson junctions at an rms voltage of 355 mV. Secondly, we used a new 8-channel ternary pulse pattern generator (PPG) to bias up to 8 arrays connected in series. An output voltage of VRMS= 1006 mV(VPP= 2.845 V) was achieved by using 8 arrays (arranged on 4 separate chips) with 63000 junctions in total. Higher harmonics are suppressed by at least -116 dBc. The fabrication process and the experimental setup will be described, as well as experimental results that are leading towards our 1 V goal.
We developed a fabrication process to establish large arrays of up to 5-stacked Josephson junctions for the Josephson Arbitrary Waveform Synthesizer (JAWS). SNS-type Josephson junctions with NbxSi1-xbarriers are used for this application. By modifying our standard window process, e.g. to add a CMP (chemical mechanical polishing) and an ALD (atomic layer deposition) step, the yield of this process was increased. An output voltage of 1 V RMS could be achieved by using 4 JAWS arrays in series with a total number of 60,000 5-stacked junctions. The investigation of the current-voltage characteristics (IVC) showed an interesting and potentially useful feature. The required pulse amplitude per junction for getting the maximum Shapiro step width reduces for higher junction stacks. We found that the pulse power linearly reduces with the square of the junction number in the array. The origin of this effect might be a strong neighbour-neighbour interaction of the junctions, which are closely arranged within the stacked configuration. This might generate a strong self-synchronization of the junctions.