Digital computing is based on the notion of deterministic bits that are 0 or 1. At the other extreme, quantum computing is based on q-bits that are delicate, coherent superpositions of 0 and 1. In this paper, we describe an intermediate approach between these two extremes, namely Probabilistic Computing, based on the notion of probabilistic or p-bits that fluctuate between 0 and 1. Hardware p-bits can be compactly realized from emerging spintronic building blocks that are smaller, more energy efficient compared to their traditional CMOS implementations. Probabilistic circuits built out of interconnected p-bits can be useful for a host of quantum computing inspired algorithms.
Digital computing is based on the notion of deterministic bits that are 0 or 1. At the other extreme, quantum computing is based on q-bits that are delicate, coherent superpositions of 0 and 1. In this paper, we describe an intermediate approach between these two extremes, namely Probabilistic Computing, based on the notion of probabilistic or p-bits that fluctuate between 0 and 1. Hardware p-bits can be compactly realized from emerging spintronic building blocks that are smaller, more energy efficient compared to their traditional CMOS implementations. Probabilistic circuits built out of interconnected p-bits can be useful for a host of quantum computing inspired algorithms.
Quantum computing is a revolutionary approach to computation that leverages the principles of quantum mechanics, enabling computers to process information in fundamentally different ways than classical computers. Unlike traditional bits, which represent data as either 0s or 1s, quantum bits, or qubits, can exist in multiple states simultaneously due to superposition. Additionally, qubits can be entangled, allowing them to be interconnected in ways that enhance computational power and efficiency. This unique behavior has the potential to run certain types of computation tasks much faster than classical computers can, marking a significant leap forward in technology. When building actual quantum computers to run practical quantum algorithms, one needs efficient ways to map the algorithms to the hardware components, similar to compiling classical algorithms onto CPU/GPU hardware. This thesis aims to tackle some of the important problems in the mapping process. First, can we address hardware errors and algorithm errors at the same time? Second, can we build a better circuit complexity metric to inspire better quantum architecture design, and can we design better quantum algorithms and compilation techniques using this improved metric? Lastly, can we use physics-level simulation results to inspire better circuit-level optimization techniques? We hope to provide positive answers to all three questions above through three separate architectural innovations.
This paper explores a novel approach to hardware acceleration for deep learning by leveraging principles inspired by quantum mechanics. Traditional hardware acceleration methods for deep learning are largely based on classical architectures and operations. This research proposes designing hardware accelerators that mimic key quantum phenomena, namely superposition and entanglement, to enhance the efficiency of core deep learning operations. The architecture utilizes probabilistic computing and carefully constructed hardware elements to approximate quantum algorithms, offering a fundamentally different paradigm for accelerating deep learning workloads. The presented framework provides a theoretical foundation and a design methodology for creating quantum-inspired hardware, potentially overcoming the limitations of conventional approaches. This work highlights a promising direction for future deep learning hardware development.
Probabilistic computing has been introduced to operate functional networks using a probabilistic bit (p-bit), generating 0 or 1 probabilistically from its electrical input. In contrast to quantum computers, probabilistic computing enables the operation of adiabatic algorithms even at room temperature, and is expected to broaden computational abilities in non-deterministic polynomial searching and learning problems. However, previous developments of probabilistic machines have focused on emulating the operation of quantum computers similarly, implementing every p-bit with large weight-sum matrix multiplication blocks or requiring tens of times more p-bits than semiprime bits. Furthermore, previous probabilistic machines adopted the graph model of quantum computers for updating the hardware connections, which further increased the number of sampling operations. Here we introduce a digitally accelerated prime factorization machine with a virtually connected Boltzmann machine and probabilistic annealing method, designed to reduce the complexity and number of sampling operations to below those of previous probabilistic factorization machines. In 10-bit to 64-bit factorizations were performed to assess the effectiveness of the machine, and the machine offers 1.2 X 10^8 times improvement in the number of sampling operations compared with previous factorization machines, with a 22-fold smaller hardware resource. This work shows that probabilistic machines can be implemented in a cost-effective manner using a field-programmable gate array, and hence we suggest that probabilistic computers can be employed for solving various large NP searching problems in the near future.
Quantum computing is an emerging technology that has the potential to change the perspectives and applications of computing in general. A wide range of applications are enabled: from faster algorithmic solutions of classically still difficult problems to theoretically more secure communication protocols. A quantum computer uses the quantum mechanical effects of particles or particle-like systems, and a major similarity between quantum and classical computers consists of both being abstracted as information processing machines. Whereas a classical computer operates on classical digital information, the quantum computer processes quantum information, which shares similarities with analog signals. One of the central differences between the two types of information is that classical information is more fault-tolerant when compared to its quantum counterpart. Faults are the result of the quantum systems being interfered by external noise, but during the last decades quantum error correction codes (QECC) were proposed as methods to reduce the effect of noise. Reliable quantum circuits are the result of designing circuits that operate directly on encoded quantum information, but the circuit’s reliability is also increased by supplemental redundancies, such as sub-circuit repetitions. Reliable quantum circuits have not been widely used, and one of the major obstacles is their vast associated resource overhead, but recent quantum computing architectures show promising scalabilities. Consequently the number of particles used for computing can be more easily increased, and that the classical control hardware (inherent for quantum computation) is also more reliable. Reliable quantum circuits haev been investigated for almost as long as general quantum computing, but their limited adoption (until recently) has not generated enough interest into their systematic design. The continuously increasing practical relevance of reliability motivates the present thesis to investigate some of the first answers to questions related to the background and the methods forming a reliable quantum circuit design stack. The specifics of quantum circuits are analysed from two perspectives: their probabilistic behaviour and their topological properties when a particular class of QECCs are used. The quantum phenomena, such as entanglement and superposition, are the computational resources used for designing quantum circuits. The discrete nature of classical information is missing for quantum information. An arbitrary quantum system can be in an infinite number of states, which are linear combinations of an exponential number of basis states. Any nontrivial linear combination of more than one basis states is called a state superposition. The effect of superpositions becomes evident when the state of the system is inferred (measured), as measurements are probabilistic with respect to their output: a nontrivial state superposition will collapse to one of the component basis states, and the measurement result is known exactly only after the measurement. A quantum system is, in general, composed from identical subsystems, meaning that a quantum computer (the complete system) operates on multiple similar particles (subsystems). Entanglement expresses the impossibility of separating the state of the subsystems from the state of the complete system: the nontrivial interactions between the subsystems result into a single indivisible state. Entanglement is an additional source of probabilistic behaviour: by measuring the state of a subsystem, the states of the unmeasured subsystems will probabilistically collapse to states from a well defined set of possible states. Superposition and entanglement are the building blocks of quantum information teleportation protocols, which in turn are used in state-of-the-art fault-tolerant quantum computing architectures. Information teleportation implies that the state of a subsystem is moved to a second subsystem without copying any information during the process. The probabilistic approach towards the design of quantum circuits is initiated by the extension of classical test and diagnosis methods. Quantum circuits are modelled similarly to classical circuits by defining gate-lists, and missing quantum gates are modelled by the single missing gate fault. The probabilistic approaches towards quantum circuits are facilitated by comparing these to stochastic circuits, which are a particular type of classical digital circuits. Stochastic circuits can be considered an emulation of analogue computing using digital components. A first proposed design method, based on the direct comparison, is the simulation of quantum circuits using stochastic circuits by mapping each quantum gate to a stochastic computing sub-circuit. The resulting stochastic circuit is compiled and simulated on FPGAs. The obtained results are encouraging and illustrate the capabilities of the proposed simulation technique. However, the exponential number of possible quantum basis states was translated into an exponential number of stochastic computing elements. A second contribution of the thesis is the proposal of test and diagnosis methods for both stochastic and quantum circuits. Existing verification (tomographic) methods of quantum circuits were targeting the reconstruction of the gate-lists. The repeated execution of the quantum circuit was followed by different but specific measurement at the circuit outputs. The similarities between stochastic and quantum circuits motivated the proposal of test and diagnosis methods that use a restricted set of measurement types, which minimise the number of circuit executions. The obtained simulation results show that the proposed validation methods improve the feasibility of quantum circuit tomography for small and medium size circuits. A third contribution of the thesis is the algorithmic formalisation of a problem encountered in teleportation-based quantum computing architectures. The teleportation results are probabilistic and require corrections represented as quantum gates from a particular set. However, there are known commutation properties of these gates with the gates used in the circuit. The corrections are not applied as dynamic gate insertions (during the circuit’s execution) into the gate-lists, but their effect is tracked through the circuit, and the corrections are applied only at circuit outputs. The simulation results show that the algorithmic solution is applicable for very large quantum circuits. Topological quantum computing (TQC) is based on a class of fault-tolerant quantum circuits that use the surface code as the underlying QECC. Quantum information is encoded in lattice-like structures and error protection is enabled by the topological properties of the lattice. The 3D structure of the lattice allows TQC computations to be visualised similarly to knot diagrams. Logical information is abstracted as strands and strand interactions (braids) represent logical quantum gates. Therefore, TQC circuits are abstracted using a geometrical description, which allows circuit input-output transformations (correlations) to be represented as geometric sub-structures. TQC design methods were not investigated prior to this work, and the thesis introduces the topological computational model by first analysing the necessary concepts. The proposed TQC design stack follows a top-down approach: an arbitrary quantum circuit is decomposed into the TQC supported gate set; the resulting circuit is mapped to a lattice of appropriate dimensions; relevant resulting topological properties are extracted and expressed using graphs and Boolean formulas. Both circuit representations are novel and applicable to TQC circuit synthesis and validation. Moreover, the Boolean formalism is broadened into a formal mechanism for proving circuit correctness. The thesis introduces TQC circuit synthesis, which is based on a novel logical gate geometric description, whose formal correctness is demonstrated. Two synthesis methods are designed, and both use a general planar representation of the circuit. Initial simulation results demonstrate the practicality and performance of the methods. An additional group of proposed design methods solves the problem of automatic correlation construction. The methods use validity criteria which were introduced and analysed beforehand in the thesis. Input-output correlations existing in the circuit are inferred using both the graph and the Boolean representation. The thesis extends the TQC state-of-the-art by recognising the importance of correlations in the validation process: correlation construction is used as a sub-routine for TQC circuit validation. The presented cross-layer validation procedure is useful when investigating both the QECC and the circuit, while a second proposed method is QECC-independent. Both methods are scalable and applicable even to very large circuits. The thesis completes with the analysis of TQC circuit identities, where the developed Boolean formalism is used. The proofs of former known circuit identities were either missing or complex, and the presented approach reduces the length of the proofs and represents a first step towards standardising them. A new identity is developed and detailed during the process of illustrating the known circuit identities. Reliable quantum circuits are a necessity for quantum computing to become reality, and specialised design methods are required to support the quest for scalable quantum computers. This thesis used a twofold approach towards this target: firstly by focusing on the probabilistic behaviour of quantum circuits, and secondly by considering the requirements of a promising quantum computing architecture, namely TQC. Both approaches resulted in a set of design methods enabling the investigation of reliable quantum circuits. The thesis contributes with the proposal of a new quantum simulation technique, no
This paper explores the development and application of novel optimization algorithms inspired by the principles of quantum mechanics. Recognizing the potential of quantum phenomena like superposition and tunneling for enhancing computational efficiency, we propose a new algorithmic framework that mimics these behaviors within a classical computing environment. The core idea is to construct an optimization algorithm that incorporates probabilistic search strategies, analogous to quantum tunneling, and explores multiple solution possibilities concurrently, similar to superposition. This approach aims to overcome the limitations of traditional optimization methods, particularly in tackling complex, high-dimensional problems. We detail the algorithm's design, emphasizing the key mathematical formulations and probabilistic elements. The proposed algorithm's performance is evaluated through theoretical analysis and conceptual demonstrations, showcasing its potential to offer improved convergence rates and solution quality compared to established classical optimization techniques. The research contributes to the burgeoning field of quantum-inspired computing, providing a practical and accessible approach for leveraging quantum concepts for optimization challenges.
Abstract Probabilistic computing has been introduced to operate functional networks using a probabilistic bit (p-bit), broadening the computational abilities in non-deterministic polynomial searching operations. However, previous developments have focused on emulating the operation of quantum computers similarly, implementing every p-bit with large weight-sum matrix multiplication blocks and requiring tens of times more p-bits than semiprime bits. In addition, operations based on a conventional simulated annealing scheme required a large number of sampling operations, which deteriorated the performance of the Ising machines. Here we introduce a prime factorization machine with a virtually connected Boltzmann machine and probabilistic annealing method, which are designed to reduce the hardware complexity and number of sampling operations. From 10-bit to 64-bit prime factorizations were performed, and the machine offers up to 1.2 × 108 times improvement in the number of sampling operations compared with previous factorization machines, with a 22-fold smaller hardware resource.