Broadband wireless communication is implemented primarily in a complicated environment. The complex environment with time-varying multi-path propagation characteristics will seriously affect the performance of communication. To solve the problem of insecurity in information transmission in wireless channels, in this paper a system is modeled by using the multi-input single output eavesdropping channel model and the security of information transmission through time reversal technology is ensured. Another problem is that the information focuses on the receiving point. Owing to the temporal and spatial focusing characteristics of the time reversal technology the information near the receiving point can be eavesdropped easily. To solve this problem, a secure transmission scheme based on time reversal technology with artificial noise interference on the transmitter side is proposed. One of the core technologies to solve this problem is to introduce the environment adaptive technique–time reversal in the wireless link. Further, the problem of a wiretap channel in physical layer security research has become a popular research topic in recent years. To solve the problems about the physical layer wiretap channel and multi-path fading in wireless channels, a novel concept combining time reversal technology with physical layer security technology is proposed. In this paper, a physical layer secure transmission scheme based on the joint time reversal technique and artificial noise at the sending end is proposed for the wireless multi-path channel. First, in a typical wiretap channel model the time reversal technique is used to improve the security of the information transmission process by using the properties of spatial and temporal focusing. It refers to the fact that information can be focused at a given moment and in space. Second, as the information is easily eavesdropped near the focus point, artificial noise is added to the sending end to disrupt the ability of the eavesdropper to eavesdrop. The artificial noise has no effect on legitimate user due to the use of null-space artificial noise in legitimate user. Based on this scheme, a closed expression, such as secure signal-to-interference and signal-to-noise ratio, an achievable secrecy rate and bit error rate are obtained, and the influences of the number of antennas, signal-to-noise ratio, and artificial noise are analyzed. The theoretical analysis and simulation results show that the proposed scheme has a higher secrecy signal-to-noise ratio, a higher rate of secrecy, and a lower bit error rate of the legitimate user than the the existing physical layer security schemes.
Broadband wireless communication is implemented primarily in a complicated environment. The complex environment with time-varying multi-path propagation characteristics will seriously affect the performance of communication. To solve the problem of insecurity in information transmission in wireless channels, in this paper a system is modeled by using the multi-input single output eavesdropping channel model and the security of information transmission through time reversal technology is ensured. Another problem is that the information focuses on the receiving point. Owing to the temporal and spatial focusing characteristics of the time reversal technology the information near the receiving point can be eavesdropped easily. To solve this problem, a secure transmission scheme based on time reversal technology with artificial noise interference on the transmitter side is proposed. One of the core technologies to solve this problem is to introduce the environment adaptive technique–time reversal in the wireless link. Further, the problem of a wiretap channel in physical layer security research has become a popular research topic in recent years. To solve the problems about the physical layer wiretap channel and multi-path fading in wireless channels, a novel concept combining time reversal technology with physical layer security technology is proposed. In this paper, a physical layer secure transmission scheme based on the joint time reversal technique and artificial noise at the sending end is proposed for the wireless multi-path channel. First, in a typical wiretap channel model the time reversal technique is used to improve the security of the information transmission process by using the properties of spatial and temporal focusing. It refers to the fact that information can be focused at a given moment and in space. Second, as the information is easily eavesdropped near the focus point, artificial noise is added to the sending end to disrupt the ability of the eavesdropper to eavesdrop. The artificial noise has no effect on legitimate user due to the use of null-space artificial noise in legitimate user. Based on this scheme, a closed expression, such as secure signal-to-interference and signal-to-noise ratio, an achievable secrecy rate and bit error rate are obtained, and the influences of the number of antennas, signal-to-noise ratio, and artificial noise are analyzed. The theoretical analysis and simulation results show that the proposed scheme has a higher secrecy signal-to-noise ratio, a higher rate of secrecy, and a lower bit error rate of the legitimate user than the the existing physical layer security schemes.
Secure wireless communication has always been a hot research topic due to the vulnerabilities associated with wireless channel. Physical layer aspects to secure wireless communication, based on the information-theoretic security and signal processing methods have gained much recognition over the last decade. Specifically, artificial noise (AN) methods are assumed to be good means for providing security against potential eavesdroppers in multi-input multi-output (MIMO) systems and/or relay systems. However, there are still a large number of nodes which do not have multi-antennas or support sophisticated protocols in wireless networks. In this paper, a novel AN-aided method is proposed to secure wireless communications between the legitimate users (not equipped with multiple antennas) in the presence of an eavesdropper. In this proposed method frequency selective property of wireless channel is exploited. The basic principle is same in which transmitter generate random AN signal utilizing some of the transmission power to confuse eavesdropper. However artificial noise is generated in such a way that it appears to be zero at the sampling time, only for the legitimate receiver while degrading eavesdropper's channel. Artificial noise is specified using the channel state information (CSI) of the legitimate users' link. However, the secrecy of proposed scheme doesn't depend on the secrecy of CSI. Extensive simulation suggests that the proposed scheme can effectively utilized for securing wireless transmissions.
Unlike many existing studies on physical layer security which use multi-antenna techniques to improve the transmission security, this paper exploits the multipath wireless channel to achieve secure transmission. Specifically, we consider a time-reversal transmission system where the signal waveform is designed as the conjugated time reversed counterpart of the wireless multipath channel. Thus, the wireless channel acts as a matched filter that can boost the signal power at the intended receiver. To further improve the transmission security, we also inject a time-domain artificial noise which causes no interference to the intended receiver's signal detection. As for the eavesdroppers, we assume that their specific number and locations are unknown and use the homogenous Poisson point process (HPPP) to model the distribution of them. First, we study the average achievable rate of the intended user and a given eavesdropper, respectively. Then, based on the HPPP model, we can obtain the secrecy outage probability under a given density of eavesdropper. With a given requirement on the secrecy outage probability, we can finally obtain the optimal energy allocation parameter and the corresponding maximum secure transmission rate. Numerical results are presented to show that the proposed scheme can guarantee the transmission security under various system parameters.
For physical layer security with multiple antennas over wireless channels, we consider an artificial noise-aided secure beamforming system. A transmitter can send the confidential information to the legitimate user more securely without eavesdropping when an artificial jamming signal interfering eavesdroppers is transmitted with the confidential information signal. The transmitter splits its transmit power for both the information and jamming signals with a power splitting factor. Under such a system model, we investigate the impacts on secrecy performance of a power splitting factor, the numbers of antennas and eavesdroppers, and noise variance at the legitimate receivers and eavesdroppers by analyzing the expected secrecy rate. The optimal power splitting factor and limiting secrecy rate with large number of antennas are also derived. Moreover, we examine the expected secrecy rate loss caused by channel variation over time. It is shown that the secrecy rate loss is independent of system parameters like a power splitting factor, the numbers of antennas and eavesdroppers in a high signal to interference plus noise ratio (SINR) region. In a low SINR region, on the other hand, the secrecy rate loss changes with system parameters. Simulation results verify these observations on ergodic secrecy rate and its loss due to time-varying channels.
Due to the broadcast nature, wireless links are open to malicious intrusions from outsiders, which makes the security issues a critical concern in the wireless communicationsover them. Physical-layer security techniques, which are based on the Shannon’s unconditional secrecy model, are effective in addressing the security issue while meeting the required performance level. According to the Wyner’s wiretap channel model, to achieve unconditionally security communication, the first step is to build up a wiretap channel with better channel quality between the legitimate communication peers than that of the eavesdropper; and the second step is to employ a robust security code to ensure that the legitimate users experience negligible errors while the eavesdropper is subject to 0.5 error probability. \nMotivated by this idea, in this thesis, we build wiretap channels for the single antenna systems without resorting to the spatial degree in commonly observed the multiple-input multiple-output (MIMO) systems. Firstly, to build effective wiretap channels, we design a novel scheme, called multi-round two-way communications (MRTWC). By taking feedback mechanisms into the design of Low Density Parity Check (LDPC) codes, our scheme adds randomness to the feedback signals from the destination to keep the eavesdropper ignorant while adding redundancy with the LDPC codes so that the legitimate receiver can correctly receive and decode the signals. Then, the channel BERs are specifically quantified according to the crossover probability in the case of Binary Symmetric Channel (BSC), or the Signal to Noise Ratio (SNR) in the case of AWGN and Rayleigh channels. Thus, the novel scheme can be utilized to address the security and reliability. Meanwhile, we develop a cross-layer approach to building the wiretap channel, which is suitable for high dynamic scenarios. By taking advantage of multiple parameters freedom in the discrete fractional Fourier transform (DFRFT) for single antenna systems, the proposed scheme introduces a distortion parameter instead of a general signal parameter for wireless networks based on DFRFT. The transmitter randomly flip-flops the uses of the distortion parameter and the general signal parameter to confuse the eavesdropper. An upper-layer cipher sequence will be employed to control the flip-flops. This cryptographic sequence in the higher layer is combined with the physical layer security scheme with random parameter fipping in DFRFT to guarantee security advantages over the main communication channel. \nAs the efforts on the second step, this thesis introduces a novel approach to generate security codes, which can be used for encoding with low complexity by taking advantage of a matrix general inverse algorithm. The novel constructions of the security codes are based on binary and non-binary resilient functions. With the proposed security codes, we prove that our novel security codes can ensure 0.5 error probability seen by the wiretapper while close to zero by the intended receiver if the error probability of the wiretapper’s channel is over a derived threshold. Therefore, the unconditionally secure communication of legitimate partners can be guaranteed. It has been proved mathematically that the non-binary security codes could achieve closer to the security capacity bound than any other reported short-length security codes under BSC. \nFinally, we develop the framework of associating the wiretap channel building approach with the security codes. The advantages between legitimate partners are extended via developing the security codes on top of our cross-layer DFRFT and feedback MRTWC security communication model. In this way, the proposed system could ensure almost zero information obtained by the eavesdroppers while still keeping rather lower error transmissions for legitimate users. Extensive experiments are carried out to verify the proposed security schemes and demonstrate the feasibility and implement ability. An USRP testbed is also constructed, under which the physical layer security mechanisms are implemented and tested. Our study shows that our proposed security schemes can be implemented in practical communications settings.
Due to the openness of wireless communication, information transmitted in the multiple access channel is vulnerable to eavesdropping by illegitimate users. Classic artificial noise-assisted schemes can improve security but are not suitable for power-constrained users. To address this problem, we propose a cross-time interference injection scheme in this paper, which improves security by introducing cross-time self-interference and inter-user interference, and does not require artificial noise. The proposed scheme exploits the properties of the Hadamard matrix and the wireless channels, so that the eavesdropping channel suffers from stronger interference than the legitimate channel. We analyze the security performance when both the legitimate receiver and the eavesdropper exploit the successive interference cancellation (SIC) scheme, including the secrecy sum rate, the secrecy capacity, and the secrecy outage probability. We further investigate the effect of the number of eavesdropper’s antennas, the number of legitimate users, and the number of time slots used by the scheme on the security performance, and obtain the corresponding relationship between these parameters when achieving a positive secrecy rate. Finally, simulation results corroborate our theoretical analysis.
Achieving secure transmission in wireless network is a significantly important research topic. Classic cryptography encrypts a confidential message to an unreadable cipher message. Thus only the authentic receiver with correct secrecy key is able to decrypt the message. However, with the growing computational capability of adversaries, the requirement of secrecy key generation and distribution is getting stringent. Another method to achieve wireless security, which has attracted much attention in recent years, is through physical layer processing, named physical layer security. In a typical wiretap channel model consisting of a transmitter, a legal receiver and an adversary (illegal receiver), early works have proven that it is possible to achieve positive secrecy rate using multiple antenna techniques, such as beamforming, at the transmitter. In this thesis, we focus on two types of malicious behaviors of the adversary: passive eavesdropping and active attack. For the passive eavesdropping, we first consider the multi-input-single-output (MISO) wiretap channel, in which the legitimate transmitter utilizes the artificial noise aided precoding strategy to maximize the achievable secrecy rate of the channel. Both scenarios of known and unknown channel state information (CSI) for the eavesdropper channels are considered. By deriving the closed-form expression of ergodic secrecy rate, we prove that there exists an optimal power ratio between the information signal and the artificial noise. We then extend our study to a four-node fading channel model in a wireless relay network, which includes two single-antenna users, one single-antenna eavesdropper and one relay node equipped with multiple antennas. By studying the decode-and-forward (DF) scheme, cooperative jamming (CJ) scheme and one proposed hybrid relay scheme, relay-and-jamming (RJ), we aims to find the optimal relay scheme with the condition that the transmitter and the relay node are under individual power constraints and the CSI of the illegitimate channel is only statistically known. Our analysis shows that the hybrid RJ scheme is optimal when the transmitter has a relatively small power budget and/or the transmitter is far away from the intended receiver. Besides the passive eavesdropping, the adversary could also choose the active attack. The pilot spoofing attack is one active attack conducted by the adversary during the channel estimation phase of the legitimate transmission. In practical systems, the pilot signals are usually known \textit{a priori} and repeatedly used information. In this attack, an intelligent adversary spoofs the transmitter on the estimation of CSI by sending the identical pilot signal as the legitimate receiver. By doing so, the adversary could obtain a larger channel rate in the data transmission phase, and also drastically weaken the strength of the received signal at the legitimate receiver if the adversary utilizes large enough power. Due to the serious consequences caused by such an attack, we first propose an energy ratio detector (ERD) that explores the asymmetry of received signal power levels at the transmitter and the legitimate receiver when the attack occurs. Our analysis shows that the ERD could provide very high probability of detection with certain requirement on the false alarming probability. Furthermore, we design a two-way training based scheme to provide not only attack detection but also secure transmission. The two-way training based detector (TWTD) exploits the intrusive component created by the adversary, followed by a secure beamforming-assisted data transmission. In addition to the good detection performance, our scheme could estimate both legitimate and illegitimate channels, with which the beamforming could be designed for data transmission.