Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

Response properties of NbN superconductor nanowire for multi-photon

Zhou Yu, Labao Zhang, Tao Jia, Qingyuan Zhao, M. H. Gu, Qiu Jian, Kang Lin, Jian Chen, Wu Pei-Heng

Published Jan 1, 2012• 5 citations
Publisher

Abstract

In this paper, we study the response properties of multi-photon of NbN superconductor nanowire in superconducting single photon detector (SSPD). We measure the NbN nanowire device's DC characteristics and detection probability for single and multi-photon light pulse signal at a temperature of 3.5 K. The measured results show that the superconducting transition current of superconductor nanowire decreases as light irradiation intensity increases. The photon number detected by SSPD is derived from the slope of detection probability versus light intensity. We find that the detected photon number increases as superconducting nanowire bias current decreases. Moreover, based on quantum optics and hotspot theory, we analyze the mechanism of the multi-photon response of superconducting nanowire semi-quantitatively. This result may be of benefit to understanding SSPD and developing the SSPD with the capability of resolving photon number.

DOI
10.7498/aps.61.208501

Related papers

Universal response curve for nanowire superconducting single-photon detectors

J. J. Renema, G. Frucci, Zili Zhou +6 more

Using detector tomography, we investigate the detection mechanism in NbN-based superconducting single photon detectors (SSPDs). We demonstrate that the detection probability uniquely depends on a particular linear combination of bias current and energy, for a large variation of bias currents, input energies and detection probabilities, producing a universal detection curve. We obtain this result by studying multiphoton excitations in a nanodetector with a sparsity-based tomographic method that allows factoring out of the optical absorption. We discuss the implication of our model system for the understanding of meander-type SSPDs.

arXiv:1301.3337•Physical Review B•May 30, 2013•34 citations

Spectral dependency of superconducting single photon detectors

L. Maingault, Michael A. Tarkhov, Irina Florya +6 more

We investigate the effect of varying both incoming optical wavelength and width of NbN nanowires on the superconducting single photon detectors (SSPD) detection efficiency. The SSPD are current biased close to critical value and temperature fixed at 4.2 K, far from transition. The experimental results are found to verify with a good accuracy predictions based on the “hot spot model,” whose size scales with the absorbed photon energy. With larger optical power inducing multiphoton detection regime, the same scaling law remains valid, up to the three-photon regime. We demonstrate the validity of applying a limited number of measurements and using such a simple model to reasonably predict any SSPD behavior among a collection of nanowire device widths at different photon wavelengths. These results set the basis for designing efficient single photon detectors operating in the infrared (2–5 μm range).

Journal of Applied Physics•Jun 1, 2010•38 citations

New advanced generation of superconducting NbN-nanowire single-photon detectors capable of photon number resolving

Alexander A. Korneev, Alexander V. Divochiy, Michael A. Tarkhov +9 more

We present our latest generation of ultrafast superconducting NbN single-photon detectors (SSPD) capable of photon-number resolving (PNR). We have developed, fabricated and tested a multi-sectional design of NbN nanowire structures. The novel SSPD structures consist of several meander sections connected in parallel, each having a resistor connected in series. The novel SSPDs combine 10 μm × 10 μm active areas with a low kinetic inductance and PNR capability. That resulted in a significantly reduced photoresponse pulse duration, allowing for GHz counting rates. The detector's response magnitude is directly proportional to the number of incident photons, which makes this feature easy to use. We present experimental data on the performances of the PNR SSPDs. The PNR SSPDs are perfectly suited for fibreless free-space telecommunications, as well as for ultrafast quantum cryptography and quantum computing.

Journal of Physics Conference Series•Feb 1, 2008•4 citations

Design of NbN superconducting nanowire single photon detectors with enhanced infrared photon detection efficiency

Q. Wang, Jelmer J. Renema, Andreas Engel +1 more

Nanowire superconducting single-photon detectors (SSPDs) consist of a superconducting wire of nanoscale cross-section [1], typically 4×100 nm2. A current close to the device critical current renders the nanowire sensitive to single photons. SSPDs are known for their high efficiency, low jitter, low dark count rate and fast reset time. An important challenge for future application of SSPDs is to extend the useful wavelength range towards the infrared without comprising detector speed or dark count rate. To this end, we explore optical designs with wider nanowires that utilize efficient detection of single photons at the edge of the nanowire. Silicon nanowires on top of a NbN nanowire increase both the calculated total absorption and the internal detection efficiency significantly compared to a standard meandering wire geometry.

arXiv:1612.02840•Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jan 1, 2017•1 citation

Modeling the effect of superconductor properties on sensitivity and responsivity of superconducting nanowire single photon detector

S. Haldar, Arun Sehrawat, Krishna Balasubramanian

Superconducting nanowire single photon detector (SNSPD) is a leading candidate for applications requiring the fundamental limit of light detection at high detection rates. While SNSPD technology employing nanowires from conventional low temperature superconducting detectors is mature with several commercial solutions, other material options with higher transition temperature approaching liquid nitrogen with faster signal responses are actively being explored. In this context, we develop a comprehensive model that predicts the final potential response from an SNSPD incorporating several physical and material aspects. A phase diagram of photon detection is developed that describes the latching phases and the photon sensitivity as a function of biasing current and temperature for both low temperature and high temperature superconductors. On the one hand, while low temperature superconductors are observed to be more sensitive than high temperature superconductors (HTSs) under any given biasing condition, a biasing window for a single photon detection with HTS nanowires is identified. On the other hand, HTS nanowires demonstrate three orders of magnitude faster response times than the low temperature superconductor nanowire at the same biasing condition, making it uniquely suited for several practical applications.

Journal of Applied Physics•Nov 6, 2024•4 citations

Time-resolved characterization of NbN superconducting single-photon optical detectors

J. Zhang

NbN superconducting single-photon detectors (SSPDs) are very promising devices for their picosecond response time, high intrinsic quantum efficiency, and high signal-to-noise ratio within the radiation wavelength from ultraviolet to near infrared (0.4 gm to 3 gm) [1-3]. The single photon counting property of NbN SSPDs have been investigated thoroughly and a model of hotspot formation has been introduced to explain the physics of the photon- counting mechanism [4-6]. At high incident flux density (many-photon pulses), there are, of course, a large number of hotspots simultaneously formed in the superconducting stripe. If these hotspots overlap with each other across the width w of the stripe, a resistive barrier is formed instantly and a voltage signal can be generated. We assume here that the stripe thickness d is less than the electron diffusion length, so the hotspot region can be considered uniform. On the other hand, when the photon flux is so low that on average only one hotspot is formed across w at a given time, the formation of the resistive barrier will be realized only when the supercurrent at sidewalks surpasses the critical current (jr) of the superconducting stripe [1]. In the latter situation, the formation of the resistive barrier is associated with the phase-slip center (PSC) development. The effect of PSCs on the suppression of superconductivity in nanowires has been discussed very recently [8, 9] and is the subject of great interest.

Opto-Canada: SPIE Regional Meeting on Optoelectronics, Photonics, and Imaging•Aug 29, 2017•0 citations
In this paper, we study the response properties of multi-photon of NbN superconductor nanowire in superconducting single photon detector (SSPD). We measure the NbN nanowire device's DC characteristics and detection probability for single and multi-photon light pulse signal at a temperature of 3.5 K. The measured results show that the superconducting transition current of superconductor nanowire decreases as light irradiation intensity increases. The photon number detected by SSPD is derived from the slope of detection probability versus light intensity. We find that the detected photon number increases as superconducting nanowire bias current decreases. Moreover, based on quantum optics and hotspot theory, we analyze the mechanism of the multi-photon response of superconducting nanowire semi-quantitatively. This result may be of benefit to understanding SSPD and developing the SSPD with the capability of resolving photon number.
Using detector tomography, we investigate the detection mechanism in NbN-based superconducting single photon detectors (SSPDs). We demonstrate that the detection probability uniquely depends on a particular linear combination of bias current and energy, for a large variation of bias currents, input energies and detection probabilities, producing a universal detection curve. We obtain this result by studying multiphoton excitations in a nanodetector with a sparsity-based tomographic method that allows factoring out of the optical absorption. We discuss the implication of our model system for the understanding of meander-type SSPDs.
We investigate the effect of varying both incoming optical wavelength and width of NbN nanowires on the superconducting single photon detectors (SSPD) detection efficiency. The SSPD are current biased close to critical value and temperature fixed at 4.2 K, far from transition. The experimental results are found to verify with a good accuracy predictions based on the “hot spot model,” whose size scales with the absorbed photon energy. With larger optical power inducing multiphoton detection regime, the same scaling law remains valid, up to the three-photon regime. We demonstrate the validity of applying a limited number of measurements and using such a simple model to reasonably predict any SSPD behavior among a collection of nanowire device widths at different photon wavelengths. These results set the basis for designing efficient single photon detectors operating in the infrared (2–5 μm range).
We present our latest generation of ultrafast superconducting NbN single-photon detectors (SSPD) capable of photon-number resolving (PNR). We have developed, fabricated and tested a multi-sectional design of NbN nanowire structures. The novel SSPD structures consist of several meander sections connected in parallel, each having a resistor connected in series. The novel SSPDs combine 10 μm × 10 μm active areas with a low kinetic inductance and PNR capability. That resulted in a significantly reduced photoresponse pulse duration, allowing for GHz counting rates. The detector's response magnitude is directly proportional to the number of incident photons, which makes this feature easy to use. We present experimental data on the performances of the PNR SSPDs. The PNR SSPDs are perfectly suited for fibreless free-space telecommunications, as well as for ultrafast quantum cryptography and quantum computing.
Nanowire superconducting single-photon detectors (SSPDs) consist of a superconducting wire of nanoscale cross-section [1], typically 4×100 nm2. A current close to the device critical current renders the nanowire sensitive to single photons. SSPDs are known for their high efficiency, low jitter, low dark count rate and fast reset time. An important challenge for future application of SSPDs is to extend the useful wavelength range towards the infrared without comprising detector speed or dark count rate. To this end, we explore optical designs with wider nanowires that utilize efficient detection of single photons at the edge of the nanowire. Silicon nanowires on top of a NbN nanowire increase both the calculated total absorption and the internal detection efficiency significantly compared to a standard meandering wire geometry.
Superconducting nanowire single photon detector (SNSPD) is a leading candidate for applications requiring the fundamental limit of light detection at high detection rates. While SNSPD technology employing nanowires from conventional low temperature superconducting detectors is mature with several commercial solutions, other material options with higher transition temperature approaching liquid nitrogen with faster signal responses are actively being explored. In this context, we develop a comprehensive model that predicts the final potential response from an SNSPD incorporating several physical and material aspects. A phase diagram of photon detection is developed that describes the latching phases and the photon sensitivity as a function of biasing current and temperature for both low temperature and high temperature superconductors. On the one hand, while low temperature superconductors are observed to be more sensitive than high temperature superconductors (HTSs) under any given biasing condition, a biasing window for a single photon detection with HTS nanowires is identified. On the other hand, HTS nanowires demonstrate three orders of magnitude faster response times than the low temperature superconductor nanowire at the same biasing condition, making it uniquely suited for several practical applications.
NbN superconducting single-photon detectors (SSPDs) are very promising devices for their picosecond response time, high intrinsic quantum efficiency, and high signal-to-noise ratio within the radiation wavelength from ultraviolet to near infrared (0.4 gm to 3 gm) [1-3]. The single photon counting property of NbN SSPDs have been investigated thoroughly and a model of hotspot formation has been introduced to explain the physics of the photon- counting mechanism [4-6]. At high incident flux density (many-photon pulses), there are, of course, a large number of hotspots simultaneously formed in the superconducting stripe. If these hotspots overlap with each other across the width w of the stripe, a resistive barrier is formed instantly and a voltage signal can be generated. We assume here that the stripe thickness d is less than the electron diffusion length, so the hotspot region can be considered uniform. On the other hand, when the photon flux is so low that on average only one hotspot is formed across w at a given time, the formation of the resistive barrier will be realized only when the supercurrent at sidewalks surpasses the critical current (jr) of the superconducting stripe [1]. In the latter situation, the formation of the resistive barrier is associated with the phase-slip center (PSC) development. The effect of PSCs on the suppression of superconductivity in nanowires has been discussed very recently [8, 9] and is the subject of great interest.