Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Downstream hysteresis-shape control of a bistable optical signal created by an upstream nonlinear photonic resonator

Saif A. Al Graiti, Drew N. Maywar

Published Dec 9, 2019• 5 citations
Publisher

Abstract

We experimentally demonstrate the control of the hysteresis shape of a bistable optical signal at a location downstream of the nonlinear photonic resonator within which the bistability is generated; this shape control mechanism is performed without any signal sent upstream to the bistable system. The downstream shape-control element consists of a fiber-optic polarization controller and linear polarizer in series, and the nonlinear resonator generates an optical signal whose bistable branches exhibit different states of power and polarization. The diversity of demonstrated hysteresis shapes include the canonical counter-clockwise (CCW) shape (S-shape), the clockwise (CW) shape (inverted S-shape), and butterfly shapes; since all shapes originate from the same bistable signal, all shapes exhibit the same switching input powers. Moreover, the shape-selection process enhances the bistable switching contrast to 20 and 21 dB for the CCW and CW shapes, respectively. The shape-selection technique is demonstrated using a Fabry-Pérot semiconductor optical amplifier, is applicable to other nonlinear photonic resonators, and provides flexibility to future combinational and sequential all-optical signal processing applications.

DOI
10.1364/oe.380710

Related papers

Optical hysteresis shape transformation using linear polarization components

Saif A. Al Graiti, Drew N. Maywar

We provide a mathematical model to elucidate how a linear polarizer can be used to transform the shape of an optical-power hysteresis curve into the canonical counterclockwise (CCW) shape, clockwise (CW) shape, and upward-switching and downward-switching butterfly shapes. This transformation is possible for optical signals whose states of polarization also exhibit hysteresis. Critical to our model is a generalized Malus' law that accounts for elliptical input polarization as well as insertion loss, finite extinction ratio, and pass-axis orientation angle of the linear polarizer. The generalized Malus' law reveals that the transmittivity of the polarizer itself exhibits a bistable hysteresis curve, and this transmittivity acts on the input-power hysteresis curve to produce the variety of output-power shapes. Additionally, we model the optimization of the hysteresis contrast of the CCW and CW shapes, achieving 20 dB or more by using a polarization controller placed upstream of the polarizer. Modeling and experimental validation are carried out using a polarization-varying bistable signal generated by an anisotropic Fabry–Perot semiconductor optical amplifier, and the results are applicable to other nonlinear resonators and means of polarization-varying signal generation. This model can be used for the study, design, and optimization of a variety of sequential and combinational all-optical signal processing applications.

Journal of the Optical Society of America B•Nov 11, 2021•1 citation

Photonic fan-out and local selectable inversion of the optical hysteresis shape

Saif A. Al Graiti, Mohamed Maafa, Son Kim Pham +1 more

Abstract We demonstrate and elucidate the local selectable inversion of the hysteresis shape of a bistable optical signal after fan-out. This selectability is based on a hysteresis-shape transformation that yields a switching contrast over 20 dB in magnitude for both the inversion clockwise (CW) and the non-inversion counterclockwise (CCW) hysteresis shapes, while maintaining input-switching powers. This behavior leverages an initial signal whose bistability is manifested by its state of polarization; a generalized Malus’ law elucidates how selection is possible by controlling the transmittivity hysteresis through each local polarizer. The concept is demonstrated using a Fabry–Pérot semiconductor optical amplifier to produce the initial bistable polarization-rotating signal, followed by a 1 × 2 fan-out and the realization of all four hysteresis shapes at each location, independent of the other location. This fan-out and selectable inversion behavior is applicable to other nonlinear photonic systems and provides new functionality for parallel optical processing.

Japanese Journal of Applied Physics•Jul 1, 2024•0 citations

Simultaneous nonlinear polarization rotation and dispersive optical bistability: theoretical and experimental analysis

Saif A. Al Graiti, Aiswarya Kannan, Claudio E. Ippolito +1 more

We study the simultaneous occurrence of dispersive optical bistability and nonlinear polarization rotation in a nonlinear photonic resonator. The demonstrated bistable hysteresis curves of the Stokes parameters broaden the notion of optical bistability in nonlinear resonators beyond that of the traditional optical-power hysteresis curve. We present a theoretical model to fully understand the polarization hysteresis curves observed in the laboratory and to establish the relevant scaling parameters for bistable action. By optimizing the optical-signal power injected into each polarization mode of the resonator and optimizing the small-signal birefringence of the resonator by selection of the signal wavelength, a polarization rotation of 30% orthogonality was achieved between stable polarization states in the lab. The theoretical and experimental methods reported here are carried out for the case of a Fabry–Perot semiconductor optical amplifier, and are extendable to the investigation of simultaneous occurrence of these phenomena in other nonlinear media (such as Kerr media) and other photonic resonators.

Journal of the Optical Society of America B•Nov 25, 2019•3 citations

Optical bistability using a Fabry–Perot semiconductor-laser amplifier with two holding beams

Hitoshi Kawaguchi, Kyo Inoue, Hiroyuki Tani

Bistable switching of an optical signal beam by a control beam with a different wavelength, using the nonlinearity of a Fabry-Perot semiconductor-laser amplifier, is reported for the first time to the authors' knowledge. Depending on the initial detuning of the optical signal beam, both normal (counterclockwise) and reverse (clockwise) hysteresis are theoretically and experimentally obtained in the signal output power as a function of the control input power.

Optics Letters•Jul 1, 1987•32 citations

Optical bistability and X-shaped hysteresis in laser diode amplifiers

N. F. Mitchell, James O’Gorman, John Hegarty +1 more

Laser diode amplifiers exhibit optical bistability when biased just below lasing threshold, and have applications as optical memory elements and optical switches, due to their very low switching energy (fJ) and presence of optical gain. While LDAs operated in transmission have received much attention, the reflection mode of operation has been largely neglected. In this paper we present a detailed experimental and numerical investigation of Fabry Perot LDA (FP-LDA) behavior under light injection when operated in reflection. We observe transitions from anticlockwise to clockwise hysteresis with changing bias level or incident wavelength detuning. Moreover, we also report the first experimental observation of X-shaped (or butterfly hysteresis) in this system. Our results are in very good agreement with calculation.>

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Dec 30, 2002•4 citations

Optical bistability in asymmetric Fabry–Perot laser-diode amplifiers

N. F. Mitchell, John C. Connolly, James O’Gorman +1 more

We present what is to our knowledge the first study of optical bistability in Fabry-Perot laser-diode amplifiers that have asymmetric facet reflectivities. When operated in reflection, the light input-light output characteristics exhibit a transition from counterclockwise to clockwise hysteresis by way of an X-shaped or butterfly hysteresis. This transition can be achieved by a change in either the device bias or the phase detuning of the incident light. Our results are in good agreement with calculation.

Optics Letters•Feb 15, 1994•28 citations
We experimentally demonstrate the control of the hysteresis shape of a bistable optical signal at a location downstream of the nonlinear photonic resonator within which the bistability is generated; this shape control mechanism is performed without any signal sent upstream to the bistable system. The downstream shape-control element consists of a fiber-optic polarization controller and linear polarizer in series, and the nonlinear resonator generates an optical signal whose bistable branches exhibit different states of power and polarization. The diversity of demonstrated hysteresis shapes include the canonical counter-clockwise (CCW) shape (S-shape), the clockwise (CW) shape (inverted S-shape), and butterfly shapes; since all shapes originate from the same bistable signal, all shapes exhibit the same switching input powers. Moreover, the shape-selection process enhances the bistable switching contrast to 20 and 21 dB for the CCW and CW shapes, respectively. The shape-selection technique is demonstrated using a Fabry-Pérot semiconductor optical amplifier, is applicable to other nonlinear photonic resonators, and provides flexibility to future combinational and sequential all-optical signal processing applications.
We provide a mathematical model to elucidate how a linear polarizer can be used to transform the shape of an optical-power hysteresis curve into the canonical counterclockwise (CCW) shape, clockwise (CW) shape, and upward-switching and downward-switching butterfly shapes. This transformation is possible for optical signals whose states of polarization also exhibit hysteresis. Critical to our model is a generalized Malus' law that accounts for elliptical input polarization as well as insertion loss, finite extinction ratio, and pass-axis orientation angle of the linear polarizer. The generalized Malus' law reveals that the transmittivity of the polarizer itself exhibits a bistable hysteresis curve, and this transmittivity acts on the input-power hysteresis curve to produce the variety of output-power shapes. Additionally, we model the optimization of the hysteresis contrast of the CCW and CW shapes, achieving 20 dB or more by using a polarization controller placed upstream of the polarizer. Modeling and experimental validation are carried out using a polarization-varying bistable signal generated by an anisotropic Fabry–Perot semiconductor optical amplifier, and the results are applicable to other nonlinear resonators and means of polarization-varying signal generation. This model can be used for the study, design, and optimization of a variety of sequential and combinational all-optical signal processing applications.
Abstract We demonstrate and elucidate the local selectable inversion of the hysteresis shape of a bistable optical signal after fan-out. This selectability is based on a hysteresis-shape transformation that yields a switching contrast over 20 dB in magnitude for both the inversion clockwise (CW) and the non-inversion counterclockwise (CCW) hysteresis shapes, while maintaining input-switching powers. This behavior leverages an initial signal whose bistability is manifested by its state of polarization; a generalized Malus’ law elucidates how selection is possible by controlling the transmittivity hysteresis through each local polarizer. The concept is demonstrated using a Fabry–Pérot semiconductor optical amplifier to produce the initial bistable polarization-rotating signal, followed by a 1 × 2 fan-out and the realization of all four hysteresis shapes at each location, independent of the other location. This fan-out and selectable inversion behavior is applicable to other nonlinear photonic systems and provides new functionality for parallel optical processing.
We study the simultaneous occurrence of dispersive optical bistability and nonlinear polarization rotation in a nonlinear photonic resonator. The demonstrated bistable hysteresis curves of the Stokes parameters broaden the notion of optical bistability in nonlinear resonators beyond that of the traditional optical-power hysteresis curve. We present a theoretical model to fully understand the polarization hysteresis curves observed in the laboratory and to establish the relevant scaling parameters for bistable action. By optimizing the optical-signal power injected into each polarization mode of the resonator and optimizing the small-signal birefringence of the resonator by selection of the signal wavelength, a polarization rotation of 30% orthogonality was achieved between stable polarization states in the lab. The theoretical and experimental methods reported here are carried out for the case of a Fabry–Perot semiconductor optical amplifier, and are extendable to the investigation of simultaneous occurrence of these phenomena in other nonlinear media (such as Kerr media) and other photonic resonators.
Laser diode amplifiers exhibit optical bistability when biased just below lasing threshold, and have applications as optical memory elements and optical switches, due to their very low switching energy (fJ) and presence of optical gain. While LDAs operated in transmission have received much attention, the reflection mode of operation has been largely neglected. In this paper we present a detailed experimental and numerical investigation of Fabry Perot LDA (FP-LDA) behavior under light injection when operated in reflection. We observe transitions from anticlockwise to clockwise hysteresis with changing bias level or incident wavelength detuning. Moreover, we also report the first experimental observation of X-shaped (or butterfly hysteresis) in this system. Our results are in very good agreement with calculation.>
We present what is to our knowledge the first study of optical bistability in Fabry-Perot laser-diode amplifiers that have asymmetric facet reflectivities. When operated in reflection, the light input-light output characteristics exhibit a transition from counterclockwise to clockwise hysteresis by way of an X-shaped or butterfly hysteresis. This transition can be achieved by a change in either the device bias or the phase detuning of the incident light. Our results are in good agreement with calculation.